Message at the opening of the VI "LABVIEW: VI not loadable.

Similar Questions

• Printer problem - after changing the cartridge, I get a message that the USB cable is not connected

  As above. I checked the USB port and it is connected.

  Original title: printer problem. After changing the cartridge, I get a message that the USB cable is not connected?

  Hello

  1. you receive an error message/code when you try to print?

  2. What is the serial number and model of the printer?
   
  Follow the steps.
   
  Method 1
  Run the hardware and devices Troubleshooter
  This utility checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also run convenience store Print that would help us diagnose the problem better
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2

  (a) check the physical connection of the printer and make sure that the USB cable is properly plugged.

  (b) connect the printer to a different USB port and check if it helps.

  (c) check the on another computer.

  Method 3

  Run the fix - it tool from the link.

  Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/

  Method 4
  If the previous step fails, follow the steps described in the following link:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
   
  Let us know if it helps.

• When I try to install the program on uniblue power I get an error message that the mia.lib was not found.

  When I try to install any programs, I receive the error message that the mia.lib was not found. What should I do to correct this?

  Hello
  Yes, it seems that this program is not running Windows XP. If the requirements for this program is Windows Vista or Windows 7, then the upgrade may solve your problem.

  I hope this helps. Just reply to the results.

• while trying to install sketches of painter Corel on 32-bit Windows Vista, I get the message of the CXML File() - > could not IID_iXMLDocument2 instance. .

  while trying to install sketches of painter Corel on 32-bit Windows Vista, I get the message of the CXML File() - > could not IID_iXMLDocument2 instance. After the closure of this msg several times I get the message .xml configuration could not be loaded. This may indicate that the file is corrupted. I tried downloading the software and the software disc and get the exact same message. Does anyone have any ideas as to what is happening and how to fix it?

  Hello

  ·          You have an earlier version (trial version) of Corel painter, installed on the computer?

  Step 1: If you need to uninstall the trial version and then try to install the full version of Corel painter.

  See: http://www.corel.com/servlet/Satellite/us/en/Content/1248977106333

  Step 2: I also recommend you contact Support Corel to this topic and see if they have a solution - http://www.corel.com/contactus

• Windows 8 don't print a report with Quicken 2006. The message is "the PDF driver is not found.

  Just bought a new computer laptop operating system windows 8.  Taken some getting used to but it is to be expected.

  I ran Quicken 2006 since 2006 on \vista without problem.

  Windows 8 don't print a report.

  The message is "the PDF driver is not found.

  Any ideas?

  Thank you

  Rick

  Original title: program programs Application Applications compatibility

  Rick

  It seems that there is no driver installed pdf for quicken.  Your best bet is to contect for the pilot to win 8.

• All of a sudden I can't open attachments to emails. I get a message that the 'security settings' do not allow. Where are these settings and who put?

  I use TWC (Time Warner Cable) as my server e-mail and Firefox as my browser. I went to my emails and has attempted to open an attachment and got an error message stating "security settings prevent the download file. Well, I contacted TWC, Norton and my PC settings. It seems that Firefox is the problem! If I use another browser ie: Google and go to my email account, I have no problem. I remember recently that Firefox did a download of updates and this may be the cause of the problem.

  Thank you for your private message with the error text: "your current security settings do not allow this file to download."

  Firefox partially integrates with Internet Explorer security settings for download purposes. You can realize your Internet Explorer settings to the 'Internet' zone by following the steps described in this answer to Microsoft forums:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/error-message-your-current-security-settings-do/59cc236d-7baf-4552-92ff-b34b9a6942aa

  Note: Traditionally, the Internet Options dialogue box was available in the Control Panel, as well as in IE. Not sure about Windows 8.1.

  What is fix?

• Why do I get an error message saying "the specific module could not be found" when opening an image?

  original title: RunDLL

  I get the window followed whenever I click on an image or a file:

  There was a problem starting c:\Users\Jim\AppData\Local\Temp\seitybu\sxxqrbw\wow.dll that the specific module could not be found

  Can anyone advise on how to fix?

  Hi Jim,.

  I suggest you to navigate to the location of the file in the error message and check if it doesn't matter what suspicious file is present. There could be opportunities that your antivirus software would have deleted a few infected file, but would have left a few remnants, which is the origin of the problem.

  I suggest you use Microsoft safety scanner and look for viruses in your computer.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software. Here is the link to launch the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Let us know the State of the question, so that we can help you.

• I get a message saying "the specified service does not exist as an installed service."

  Hi, im having problems with windows vista where whenever I try to update my system (security, java, adobe) or I right click on the sound icon in the toolbar of my screen (and open) section, I get the message saying that the specified service does not exist as an installed service. SO, I searched online and which did not help. Oh and by the way, when I get the options after I have right click on the sound icon, I can't click on the mixer. IM using a dell inspiron 531 and it works on windows vista and is very slow, almost never answers (only restores the games that I have on it) and has an athlon processor. What should I do? Thank you, Shawn White. P.S. that's in the good topic?

  Hello

  1. you remember to make changes to the computer before this problem?

  2. what anti-virus is installed on the computer?

  Follow these methods

  Method 1: A Microsoft Safety scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:   Run the fixit in the following Microsoft article and check if it works.

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 3: Run a file system check Scan (scan SFC)

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  a. open an elevated command prompt. To do this, click Start, click principally madeprograms, Accessories, right-click guest, and then click run as administrator.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER:
  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Merthod 4: Check services.

  Check if a service is stopped or disabled. You will need to check each service one by one. If you find any service is stopped or disabled, you must start or enable and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/manage-services-in-Windows-Vista-from-Windows-Vista-inside-out

• My Thuderbird for mac does not delete messages from the server and can not find the setting in tools to do.

  According to the forum users, you go to tools-> account settings and there should be a box to "leave the message on the server" that I can uncheck, however, I don't see that my Thunderbird program for mac.

  You use the POP or IMAP protocol by e-mail? I guess that IMAP because you do not see the option.

• After the crash of the HD and reloading of Gmail and Thunderbird using the e-mail as before POP now, random messages on the Gmail server does not move to Thunderbird.

  I think it's all said above. Always use POP e-mail to move my Gmail to Thunderbird and it worked perfectly. Now apparently rec emails at random would be in Gmail server do not move to Thunderbird. Most do, some don't, and it seems so random.
  I checked all the settings I know and it corresponded exactly to the configuration I have on another computer set up with the same POP mail/thunderbird configuration, which continues to work perfectly.
  Any other explanation than switching to IMAP which I don't want to NOT do?
  Win7 64, laptop Dell XPS 15Z
  Thank you is advanced.
  -Neil

  Both computers have POP accounts? With POP by default is to remove the messages from the server. So the other computer can simply be faster from time to time and pick up the message first.

• Why, yesterday evening, I receive the message that the security certificate is not valid on the sites that I use all the time, as my account hotmail, facebook, paypal, etc.?

  I even got this message when I tried to post my question! It is said that Firefox can not verify a connection with mozilla, or any website, I am visiting, because the security certificate is not valid. It gives even the dates to which the certificate will be valid, and the date indicates that it is valid. So frustrating! I "replace" Firefox every time.

  The date / time set correctly in Windows Vista?

• In XP, try to disable guest account, get message that the specified program is not a ms - dos program

  When I try to turn off guest account, I get: the specified program is not a ms - dos program

  Hi OfficerHansen,

  1. what steps you follow to disable the guest user accounts?

  2. which edition of Windows XP is installed on the computer?

  Step 1:

  Try the steps from the link to the following article:

  To turn off the guest account or the

  Step 2:

  If you use Windows XP Professional, then the following steps:

  a. Click Start and then click Run.

  (b) in the Open box, type Gpedit.msc and click OK.

  c. under System Tools, expand "Local users and groups" and then click on "users".

  d. in the right pane, right-click on "Invited" and select Properties.

  e. place a check next to "account is disabled".

  f. click Ok.

  Reference link:

  How to use the Group Policy Editor to manage Local computer policy in Windows XP

  I hope this helps.

• Try to install a printer, but keep getting the message error "the specified environment is not valid.

  So I try to reinstall a printer on a computer and I get the message that the printer cannot be installed and the environment specified is not valid.  It was working a week ago and now it is not.  The printer has already been uninstalled, so I'm stumped.  Any help would be appreciated.

  Printer is HP Laserjet 1020

  Hi miket219

  
  I suggest refer you to the below provided the link and download the latest drivers available for Windows XP on the Web site. Check that if the installation of the last driver put up-to-date helps you solve the problem-

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=439428&lang=en&cc=UK&prodTypeId=18972&prodSeriesId=439423&TaskID

   

  I hope this helps.

• My operating system is Windows XP Home Service Pack 3. In the process of printing two jobs, first filled, but second one hung up. Error message was the print spooler does not.

  I followed the suggestion to use start > Control Panel > administration tool > services > print spooler > properties.

  System in automatic mode but State of the said service stopped.

  I get error 1075: the dependency service does not exist or has been marked for deletion.

  Printer worked this AM, but stopped working between two print jobs.

  I used Mr. Fixit to diagnose and fix the problem. Mr. Fixit indicates the print spooler service is not running, but cannot fix it.

  Is there a source code for Windows XP service pack 3 which can be downloaded to replace the corrupted code?

  Thanks for your help

  Curry:

  I have followed your suggestion after that someone else provided the steps for me to do the program accept net start spooler.

  The error message was THAT SYSTEM ERROR 1075 has occurred.

  The dependency service does not exist or has been marked for deletion.

  If I need to reload the operating system, I have a back up saved on a hard drive.

  Do you know what file (s?) needs to be recharged?

  Thanks for your help.

• When you add an .mp3 file to a Lightroom Slideshow, receive message error "the selected file is not a valid music file.

  Hello

  Use Lightroom 5.7.1, cannot import an mp3 file in the playback menu and receive error message in the title.

  In addition, despite the upgrade, we do not see the menu music.

  Please notify.

  Michel.

  Hello

  Could you please confirm what operating system you are working on.

  Also I suggest you to convert Mp3 files to M4A format then try and add them in Lightroom.

  You can try this link to convert the files, or try another third party application: http://audio.online-convert.com/convert-to-m4a

  Please let us know if it helps.

  Kind regards

  Tanuj Sandal