How difficulty Xinput1_3.dll missing?
I'm sick of this error. Someone told me that it is a DirectX error. So I uninstalled DirectX from the hard drive and reinstalled back. It was a useless effort that the error persists. I also checked if the version of DirectX installed on my PC has been updated.
Any help will be appreciated.
James.
Hello
What you probably need is the DirectX Runtime June 2010... This is an optional set of DirectX files, which one is be the one you need...
After downloading the full package, double-click it. This will bring the self-extracting package...
Don't forget to note where it is saved.
Then open the folder and double-click DXSETUP, and you should be good to go...
Here is the link... It will start the download of Microsoft...
http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109
Tags: Windows
Similar Questions
-
I installed windows 7 on my laptop and try running farcry on it but it gives me an error Xinput1_3.dll is missing. Now what should I do?
Original title: how to difficulty Xinput1_3.dll is missing in windows 7
I installed windows 7 on my laptop and try running farcry on it but it gives me an error Xinput1_3.dll is missing. Now what should I do?
Seems that you need to update direct x version...
http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/missing-d3dx942dll-and-xinput13dll/44b0396e-a5a2-4BC2-BB32-234aa7cb82dcEnd-user Runtime Web install DirectX
-
xinput1_3.dll is missing
while trying to open far cry 3 I get this error
xinput1_3.dll is missing...
is something wrong with my direct x (11) or is this normal
How to fix?
Please don't suggest that you download separately on any site
Hello
This file is part of a package called DirectX Runtime June 2010 optional DirectX...
It's actually a file DirectX 9... I think so...
Many games require it... even my printer Lexmark need the Runtime package!
You will need to download it, but the link is Microsoft... It's a package to extract free to take note of where it\you extracted to open the folder, and then double-click DXSETUP...
The download will start when you click on the link... just choose the location.
http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109
-
How can I solve miss me TCMSVR. DLL on a TECRA S1 Windows XP
How can I solve miss me TCMSVR. DLL on a TECRA S1 Windows XP
ChristianPlease check this topic on the forum:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16564Maybe it helps, but it seems that it s a part of the Toshiba drivers or file that is missing.
-
sispower.dll missing. How can I fix it?
sispower.dll missing. How can I fix it?
Hello
- When you get this error message?
- Did you change the system before the show?
Sispower.dll is a library of dynamic links for implementing power management of Silicon Integrated Systems Corporation SiS Power Scheme Library membership
Try to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
How to configure Windows to use a Normal startup state
After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
(a) click Startand then click run.
(b) type msconfigand click OK.
The System Configuration utility dialog box appears.(c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.
(d) when you are prompted, click restart to restart the computer.
-
How to restore the missing dll? -lack of plnradt.dll
I get a message c:users\ (name) \app dataI Miss c:\users\ (name) \app data\local\plnradt.dll. How to restore the missing dll.
You could have, or still are, infected by malware; and it could also be a starting top left him entry.
Malware scan:
http://www.Malwarebytes.org/MBAM.php
Malwarebytes is as its name suggests, a Malware Remover!
Download the free Version from the link above.
Download, install, upgrade and scan once a fortnight...
How to use Malwarebytes once it is installed and updated:
1. open Malwarebytes > click the update tab at the top > get the latest updates.
2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer
3 MBAM will now start to scan your computer for malware. This process can take some time.
4. when the scan is complete, a message box will appear
5. you must click on the OK button to close the message box and continue the process of Malwareremoval.
6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .
7. a screen showing all of the malware displayed the program that is
8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.
9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.
10. you can now exit the MBAM program.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the error persists after scanning, use the program to out startup:
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.
See you soon.
Mick Murphy - Microsoft partner
-
How can I fix error FaceHI.dll missing on start up
How can I fix error FaceHI.dll missing on start up?
Hello
If you use a facial recognition software, please reinstall the software and check.
-
I don't know how to resolve this error message. Can someone help me? ErrorinC:\windows\system32\spool\drivers\x64\3\lxcdtime.dll missing entry_Rundllentry@16
Re-install your Lexmark printer driver
-
wczdlg.dll and netshell.dll missing and cannot start my Windows Firewall
Hi allI hope that someone will be so good to help my with this situation I tried (and failed) solve this past week or so.I lost my firewall, l, and network connections. As advised I checked the status of the automatic Wireless Configuration. The State was "arrested" and was not a solution for this. I continue typing applications for a solution ot wczdlg.dll and netshell.dll missing. Now I can sign BT.openzone - it's the only way I can use the web.
Also I can't start my Windows Firewall. I have no idea why my system is so badly damaged - the only situation I had was that my charger no longer works and my laptop crashed. I also brought my laptop (HP compaq nc4200-Xp) to my daughter.I don't have a recovery disc and the disc I have with drivers does not download. I would be grateful for any resolution of this problem. I'm only a moderate ad user have no knowledge regarding the actual system so need advice step by step.Thank you very muchJackyHi Jacky,
Thank you for your response.
I suggest you follow the steps in the link below.
Could not start the Windows Firewall service in Windows XP SP2:
http://support.Microsoft.com/kb/920074
Note: This also applies to Windows XP Service Pack 3.
To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
Let us know the status of the issue. If you need help, please after return. We will be happy to help you.
-
At the start, my computer still comes with XMPP.dll missing file. I looked online and can see sites where I can download this file, but I fear that they are reputable or not so eager to ask advice on which are safe. I don't know if it's related, but my computer is running very slowly and it is very frustrating. I know how to run disk defrag etc but none of this makes much difference to performance.
Hello
You did changes to the computer before the show?
Method 1:
Step 1: you can check if the problem occurs in safe mode.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Step 2 the question don't occur in safe mode, and then perform a clean boot and check.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.Method 2:
Try the SFC (System File Checker) scan on the computer.For more information, see the article:
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)http://support.Microsoft.com/kb/310747
Method 3:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
WARNING:
If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted -
Kernell debugger dll missing or corupt in windows vista
Windows crashed. I have 2 errors: error System 32 and kernell debugger dll missing or corupt. Tried backup to the previous week, months and months without success. Tried to reinstall windows without success. I have 2 hard drives, but did not understand how to install 2nd hard drive from computer to boot. 1702 Dell Vista, had service pack 2.
Hello
Here are the two ways that Dell allows you to reinstall Vista.
How to reinstall from the Dell recovery partition:
How to reinstall using the provided Dell recovery disk printer:
See you soon.
-
error in ms01ary.dll missing during startup
error in ms01ary.dll missing during startup
Hi TonyMagsino,
(1) since when are you facing this problem?
(2) what is the complete error message you receive?
Method 1: Enable the boot and then check if the problem persistsFollow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
-
Files MSVC90.dll and COMCTL32.dll missing gdiplus.dll
Original title: missing .dll files
I have Windows 7, with 3 missing .dll files. I tried a number of programs that claim to difficulty and install missing .dll files. In all cases, the program will download, then when you click 'Finish', it gives you a message that it cannot install the program because I'm missing .dll files. It's true! That's why I'm bringing them reinstalled! 3 missing files are: MSVC90.dll and COMCTL32.dll gdiplus.dll. Any ideas? Thank you. * E-mail address is removed from the privacy *.
Hello RonBrett,
I suggest you to install the msvcr90.dll which is a party, if the Microsoft Visual C++ 2008 SP1 redistributable package.
Click on the article below that describe the run-time components in Visual C++.
326922 KB - Redistribution of the shared C runtime in Visual C++ componentYou must keep all the different versions of Visual C++ 2005, 2008 and 2010, because different programs need these packages installed. The Microsoft Visual C++ 225, 2008, install the redistributable Packages components runtime library Visual C++ required to run applications developed with Visual C++ on a computer that does not have Visual C++ 2005, 2008 or 2010 is installed. The Msvcr90.dll is included in Microsoft Visual C++ 2008.
Download the Package redistributable Microsoft Visual C++ 2008 SP1 (x 86)
Click to download the Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)then, run System File Checker to see if you have a corrupt system.Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any violation of the integrity and repair any damaged operating system files.
Reboot your system.
Now see if you get the same error message for missing .dll files.
Please reply back and let us know if this can help.
Marilyn
-
msdvcp110.dll missing file error
msdvcp110.dll missing file error
I'm done with the installation of c ++ redistribution and everything but does not work for ultimate express
Original title: installation of visual studio 2012 on windows 8
Hi Mike,.
Thanks for posting your query in Microsoft Community.
The error you get can be caused by components from Visual C++ Runtime libraries that are missing or get conflicted, perhaps due to a third party software or badly configured registry settings.
So, I would suggest trying the following steps and check if the problem persists:
Method 1:
I suggest to install the Visual C++ Redistributable package in the system to boot and try to run the applications:
Step 1: Clean boot of the system.
Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
How to perform a clean boot in Windows
Note: refer to "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.
Step 2: Download the Microsoft Visual C++ 2013 and install.
Click on the link below and install it on your computer.
Package redistributable Visual C++ to Visual Studio 2013
If she fails to install and then try to install the Package redistributable Visual C++ 2010 in compatibility mode. Follow the steps in the link given below to install Visual C++ 2010 redistributable Packages in compatibility mode. Please see the following article:
Make the programs more compatible with this version of Windows
If the problem persists, try the following method.
Method 2:
Try to run a scan of the file system (CFS) auditor to check corruption of system files in the system. SFC scan will search for system files corrupted on the computer and fix them.
- Press the Windows key + X, click prompt (Admin).
- In the command prompt, type the following command and press ENTER:
sfc/scannow
For more information, refer to this link:
Use the System File Checker tool to repair missing or corrupted system files
Hope this information is useful. Let us know if you need more help, we will be happy to help you.
-
WMVCORE. DLL missing first pro Windows 10
Firs thing I noticed after installing Windows 10 was that I could not open Adobe Premiere Pro, because WMVCORE. DLL is missing...
I went looking for a solution, has found one, do a quick tutorial on how to solve the problem and hope that I can help a lot of people quickly because
I hate having to without constantly searching on google for a solution and to find videos that never help or are outdated.
It does not require a download or anything so don't think that you need to download a. DLL file because you already have it.
Adobe Premiere Windows 10 WMVCORE. DLL missing quick fix (-2 min) - YouTube
I actually have the solution here:
Adobe Premiere Windows 10 WMVCORE. DLL missing quick fix (-2 min) - YouTube
I made this thread because people looking for a solution to this problem so quickly find here
Maybe you are looking for
-
Hello I have a Qosmio F10 which was purchased in me for repair.He underwent the faliure GPU from nVidia to the common address but meets in perfect condition and certainatly too good to discard.I managed to get your hands on a part of the Service of O
-
Satellite Pro L20: Battery lasts only 30 minutes.
This problem has persisted throughout the four months, I've owned and used this notebook: when the battery has been recharged and I try to work on battery power only, the battery reading usually indicates 82% min 27' and, as you would expect, runs ri
-
stepper motors to move the antenna
Hello! My name is Paul, I'm from Romania. I need some ideas on how to make a project. I need control a false antenna (I say false because it will be not attached to anything, just for purposes of exposure) using LabView. The antenna will be very low
-
I downloaded a few songs and remixed them and his work, but I had the yellow HR sign under the name of what it means? I edited the song on computer and as soon as I copied the songs that I saw this yellow marking on my xperia
-
I'm taking pictures in my widget, but when I make the call blackberry.media.camera.takePicture (successCB, closedCB, errorCB); I got this error in the Simulator as well as in a real device: "error in management: TypeError: result of expression 'black