How do I completely remove my ethernet driver and install a new

Similar Questions

• How do I completely erase the hard drive and reinstall everything for Windows 7?

  I want to completely erase a hard drive on a laptop, that I intend to use when traveling.

  Then I install windows 7 (which I bought) and my other programs

  Can I get step by step please

  Thank you

  Wanda Gill

  Some read to you... Installation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  But before you begin, make sure that your computer and the applications and the current programs are Windows 7 friendly...

  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15

  And check your programs here too...

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software

• My new HDD is damaged, I would that the instructions to remove the hard drive and install windows 7, so I can later install windows 8.

  Hardware failure on the disk.  Installer installed new drive and put it on Vista.  I have corrupted data and can not download the service pack 1 upgrade to windows 8.  Can I erase the hard drive and buy a cd for windows 8.  If yes how I wipe the drive hard and etc.  Thanks in advance, baildaily

  To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/error-8000ffff-unable-to-fix-need-advise/597003cb-e5a7-4198-8ae6-36cafe876005

• Satellite P30: How to format the HARD drive and install a new OS?

  I have a satellite P30 laptop with Windows XP. I plug myself a new OS (namely because I can't find my old recovery CD CD and OS) that I want to do a re-shape full of my system. Reason is that my system has been painfully slower and slower over the last year. I even updated my RAM to 512 MB standard supplied with the machine to 2 GB, but it seems to have had little or no effect. So my questions are:-

  1] where can I get my hands on the restore CD that has all the drivers on this subject, and any recovery CD to reformat my HARD drive?
  [2] in the order in which I will make this reformatting?
  How can [3] after having bought an external HARD drive to keep files that I don't want to lose, I transfer those of before my re - format?

  Any help will be greatly appreciated

  :-)

  Hello

  You received with the laptop Toshiba Recovery CD! Am I wrong?
  So what s the problem?

  Simply insert the CD and try to boot from this CD.
  The restore CD contains all Toshiba drivers, tools and utilities Windows OS + additional software like Win DVD for example.
  The installation will set the laptop to factory settings, but will also format the HARD drive!

  Up to now, we come to the point 3; --> How do I save the data
  If you have purchased a second HDD and connect it to the USB port and transfer all the necessary files on the second HDD
  If you have purchased only the HARD drive, then you will need a USB HDD 2.5 case.

  Best regards

• How to remove the old operating system and install the new system?

  Dear Sir/Madam,

  I have install start windows 7 now I try to install vista but the system was correpted he opened not how remove both on the hard drive and install the new operating system.

  Hello

  Restart installing dual boot.

  "How to set up a Dual Boot Installation with Windows 7 and Vista"

  http://www.SevenForums.com/tutorials/5166-dual-boot-installation-Windows-7-Vista.html

  Or this way:

  "How dual boot Windows Vista and Windows 7 (Vista installed first)."

  http://apcmag.com/how_to_dual_boot_windows_vista_and_windows_7_vista_installed_first.htm

  «Dual Boot Windows 7 with XP/Vista in three easy steps»

  http://www.TechSpot.com/guides/143-dual-boot-Windows7/

  See you soon.

• I would save firfox to a flash drive and install it on another PC. How can I do this?

  My father who is in the laws Internet Explorer crashed and I would like to install Firefox. I can't access the internet from their PC to do this. How can I save to a flash drive and install from there?

  Get the latest version from here and run the installer on new pc

  • getfirefox.com

• How can I completely remove windows xp pro network connection screen

  Several months ago, I bought a used computer. It is a HP Compaq apparently set on foot for the tuition fees online with K12.org. It came with any disks, and I had an awful time trying to get the login screen for the computer network without having to use it. I managed to find and disable the Client for Microsoft networks according to previous research, but the screen would still pop up. I used the forums for info I would need to get the thing to only us force hitting an "OK" button so that we would not enter a password every time. Now the screen, which allows to popup, will not be shown or only appears intermittently during startup and Windows shows "Starting Windows" and everything crashes and hangs without taking me to the "Welcome" screen

  This problem started last night. I'd really like to get this thing to use it without worry.

  Any help you offer is greatly appreciated.

  Hanging to the startup problem is certainly indicative of a larger problem.

  In your case, I highly recommend that you completely reinstall Windows on your machine.  Most of the HP/Compaq machines have a recovery partition which will reinstall Windows on condition "as-bought.  To access this, when you start and the first HP or Compaq startup screen appears, you should see at the bottom of the screen a touch that will put you in the recovery mode.  Press this button quickly because you don't have a lot of time.  Follow the prompts to completely wipe your hard drive and reinstall Windows.  (Make sure that you back up all of the necessary files first).  If you do not have this key, and then connect to the HP site and download the manual for your specific computer model.

  If you cannot reinstall Windows, then try a system restore to a point in time before that you had your boot-hanging problem.

  "How to restore Windows XP to a previous state"
   <>http://support.Microsoft.com/kb/306084 >

  Then follow the following instructions to activate the automatic connection

  "How to turn on automatic logon in Windows XP"
    <>http://support.Microsoft.com/kb/315231 >

  «How to open automatically log on a user account in Windows XP»
    <>http://support.Microsoft.com/kb/282866 >

  HTH,
  JW

• How can I complete remove a dimension in planning version (11.1.2.2) last?

  I did the process of blow and I can't delete a dimension in the dimension list.
  1. I create a dimension of my project. But now I want to finish remove it.
  2. I have delete all his descendants, and I disassembled his type of valid plan.
  3. refresh the database.
  
  After that, I don't see this dimension in Essbase but it keeps in the dimension of the planning list.
  How can I complete remove it in planning?
  
  Thans for help.

  Hi, in fact you can not.
  Some methods of doing what you want here:
  Delete the Dimension

  http://hyperionism.blogspot.com/search/label/Hyperion%20Planning

  First is a standard, and the second is not supported by Oracle.

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• How can I wipe my drive and reload a new OS on my desktop

  How can I wipe my drive and reload a new OS on my desktop?

  Reboot with the command keys and R keys, use disk utility to erase the computer's internal drive and install a fresh OS.

  If you initially Lion among Apple's USB keys, you need to connect this drive, and then press Option after the reboot.

  (142468)

• If I format my drive and install linux, how do I install and activate my windows?

  * Original title: reinstalling Windows 7

  Hello

  I bought a laptop recently, with a pre installed, activated windows 7. I'll be using linux for some time and goes back to Windows. If I format my drive and install linux, how do I install and activate my windows? And where can I get the source? In my laptop there is no serial number sticker. Its a laptop Lenovo b50-80.

  Please do not suggest dual os.

  Here's what I suggest strongly that do you before installing Linux, create a system image backup.

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  When you install Linux, then decide to go back to Windows 7 sometime in the future, you can just restore the image of the system.

• How to remove an admin account and create a new user profile

  Hi, I have been using my 2 in 1 PC since July last year and I'd like you guys to show me the steps on How to remove an admin account and create a new user account.

  Hello Nicolas,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. you try to delete a local administrator account?
  2. are you able to connect using the Microsoft account?

  Thank you for your query details.

  I also like the fact you want to know how to remove an administrator account and create

  a new user account.

  If you are able to connect on the Microsoft account, I suggest you try the following steps to remove an administrator account.

  a. press Windows + X keys and click on computer management.
  b. click on "local users and groups" and then click on "users".
  c. right-click on the account which you want to remove, and then click 'Remove'.
  d. click 'Yes', if the prompt message.

  To create a new user account, please see this article:
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  See also:
  User accounts: FAQ
  http://Windows.Microsoft.com/en-us/Windows/user-accounts-FAQ#1TC=Windows-8

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I get to level my windows in Windows 7 PC.  My old PC had CS6, Bridge, and Lightroom installed 5.7.  I want to remove all three of the old and install the new.  How do I do that?

  I get to level my windows in Windows 7 PC.  My old PC had CS6, Bridge, and Lightroom installed 5.7.  I want to remove all three of the old and install the new.  How do I do that?

  First of all make sure you disable / disconnect in order to save the number of activations.

  Click the help menu, and then select disable / disconnect .

  Then you can uninstall in Control Panel uninstall process as normal.

  Later, you can download and install CS 6 app link below:

  Download Creative Suite 6 applications

• I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  Download the CS5 products

• I got a message that my Windows 7 is not genuine. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  I took my office for repairs after that my motherboard has given. I did an upgrade and the repairman had my re - installed Windows. I know evil to fix my Internet security software and discovered a list of other problems with missing or corrupt files. After inspecting my system, I discovered that the repairman installed Windows with a product key is counterfeit.

  I have my legitimate Windows 7 Home premium disc and product key. How to re - install Windows 7, because windows fitted by repairer are Home Premium 32 Bit, and Windows I have are Home Premium 64 Bit.
  I would like to do a full install of Windows, I backed up all my data and have all the product keys of software installed on my desktop. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  Boot from the DVD 64 bit Windows 7

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  If you have problems, use the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us