How do I enlarge the pictures in Photo Albums when you are logged into Facebook

Similar Questions

• Why do I get the access denied error message when you are logged in as administrator?

  "Error" failed to create the file 'C:\Windows\Fonts\[font name]. " Access is denied. "

  is received when I try to install a font by being logged on as administrator (I'm the only person who uses this)
  computer with password protection guest no account)

  or when I use WinZip the fonts folder is not available

  The fonts folder is blocked with a "read-only" access  I can't find any way to change the permissions on the folder (there is no security tab), and any attempt to change the status of reading is has met an insufficient privileges error message.  I notice that the fonts have been added during the last few days several times but I have nothing personally for it - he did alone (how I don't know).  I admit be baffled by your inability to add fonts using your CD (even though I'm reasonably sure it's read-only permission which is at the origin of the problem). I use Vista Business SP2 32-bit and my comments were based on it.  I never really tried to install fonts on my system, so I don't know if I would have the same problem - I presume that I would give for the same reasons.  The article I posted http://windows.microsoft.com/en-US/windows-vista/Install-or-uninstall-fonts explains how to install individual fonts in formats of special fonts - it does not how to do when you use a CD with an install button.  Have you tried right-clicking on the button install to see if it brings up the run as Administrator option (it probably won't)?  Here is another article on how to install fonts: http://www.lytebyte.com/2007/07/03/how-to-install-new-fonts-in-windows-vista/.  If you link to the CD player will be able to see the individual fonts and "select all" or according to which you want to install - instead of using the installation with the CD button (if you can find the right folder (s)).  Here is an article from third on the installation of the http://www.windowsreference.com/windows-vista/how-to-install-fonts-in-vista/ fonts that suggests using the install button should work as should drag / drop it into the fonts folder - thought we seem to be having trouble with these procedures (and I think he did the permissions block which I can't imagine why he's here or why there is no security tab allows you to adjust).

  Maybe someone with more knowledge (like Engineer Support or an MVP) see this thread and respond with a solution.  In the meantime, I'm puzzled.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I am disconnected and then reconnected___

  the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I disconnected and then reconnected.

  I just ran windows update on a large number of files all successful before this happened, it happens when I am connected to the internet, I use dial-up access

  added on 25/11/09 still have the problem mentioned above, even explore two windows are runnibg on the system, or two IE browsers running?

  Added 27/11/09 I ave followed all instructions up to and including thefix tool kb/93623, stiil I have this report of windows Defender quickly appearing twice in a row, then I'm disconnected from the internet. any more ideas thanks sam

  Visit this link:
  http://support.Microsoft.com/kb/936213

• HP Office Jet Pro 8600 help how do I enlarge the print on an original when it is in copy mode?

  I find it on my help screen how do I enlarge the print on a copy of an original document that I want to copy. I have Windows 7 on my computer and printer is HP Office Jet Pro 8600 wireless. I have a printer HP (3 in 1 officejet) before and it was much more user friendly. Is to use the online mode?

  Here is a link to the user manual. To get the possibility to enlarge the copies, press this option on the display of the printer, then tap SETTINGS and then select resize, use the right arrow key to scroll through the sizing options on the printer. Changing the settings of copy is covered on page 59 and 60 in the manual. I hope this helps.

• Cannot view the subfolders in photo library when you try to attach photo to email.

  I use Windows 7 Professional.  When I create a Yahoo or Gmail email and you want to attach a photo, I click on 'attach file,' go to the folder of pictures in my library, but today, no pictures don't show - but they are there, I can't see the folders.  I have subfolders by year, which is what I want to see.  The last time I tried this, probably a few weeks ago, he had no problem, all the records showed, as usual.  I can search in the page/bar, "search for my pictures" and type a name or date and everything will show, but I really just want the files because I know exactly where everything is.  How can I get this to see my folders back?

  I tried everything suggested and nothing has worked.

  I continued to look for my question and tonight finally found the easy solution to this forum.

  http://answers.Microsoft.com/en-us/IE/Forum/IE10-Windows_7/cant-access-most-photo-files-browsing-with-IE10/832ea066-4D95-4c64-A9D5-1e274e562ec1?page=2

  Click the Start button and click on your username at the top.

  Massive rearmament of the hidden attributes can be done by right clicking the (my pictures...) the list and select Properties.

  Section of the tab general, check hidden near the bottom and click on apply.

  This will change all files to hidden, click Yes,.

  Then uncheck the hidden box and apply,.

  It will remove the attribute hidden all your files, click Yes,

  Then finally click on apply then OK.

• How to remove all the old e-mail addresses when you use change as new?

  When you use as new edit on a mail, previous winners are listed in the address field. How to delete these addresses all at once rather than having to delete them one at a time?

  I don't know of anyway to remove them all at once, but there is remove an add-on that places a button next to each address, which is easier to use that repeatedly do select + and + DELETE. You just keep clicking the small X in the address above.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/address-close-button/?src=API

• How can I fix the cannot find server error when you use Bing?

  When I want to use Bing as a search engine, I always get an error message cannot find server. When the connection problem is diagnosed, the result is that there is not a problem with the connection. I get the same thing when I use the Google search engine. OT most of the time I'm successful search with Ask. I use Windows XP.

  Hi MineMN,

  ·         Did you do changes on the computer before the show?

  ·         What web browser do you use?

  If you are using Internet Explorer, follow these methods.

  Method 1: Follow the steps in the article.

  "Internet Explorer cannot display the webpage" error in Internet Explorer

  Method 2: If you still face the same problem reset the TCP/IP stack.

  How to reset the Protocol Internet (TCP/IP)

  Method 3: Reset the proxy server. Follow these steps:

  (a) click Start, run, type cmd , and then press enter.

  (b) type the following commands at the command prompt and press enter after each command:

  proxycfg d

  proxycfg-u

• How can I change the color of text selection when you edit a pdf file?

  I was fussing around with preferences in Adobe Acrobat Pro XI (Mac version) and off the selected text color when the text selection. I don't know what preference I changed and can't seem to find a second time to restore the color of text selection. Usually, in Adobe Acrobat Pro XI, when the selection of text (note: NOT the text stressing the function), AAP XI has a color to the selected text.  This preference restaurantrare the saltsummer color of the text when you use the selection tool i-beam appearing to the left of the hand tool?

  

  Now, it simply displays the text selected, as shown in the figure below.

  

  Once again, please, note that I don't watch highlight tool 3rd from the left in the picture below.

  

  My guess is it is something under Edit - Preferences - accessibility, possibly the "high contrast colors" option, or 'always use the system selection color. "

• How to stop Windows Update to take keyboard focus, when you are asked "do you want to restart now?

  Windows Update often wants to restart the computer after an update.  If you say "not now" (or ignore?), he will later pop up a question "reboot now?" in a bubble of task bar.  INCREDIBLY, it will at that time take keyboard focus of everything that happens and then accept what he gets as a response from the user.  This means that if the user was in the middle of typing something, the following sequence of keys will enter the bubble "you want to restart" instead of some request the user was in the middle of the help.  It's very bad.

  Here is what just happened to me.  I was in the middle of typing a document when the keyboard focus was suddenly taken by the issue of recovery, a fraction of a second later, the following combination of keys, he disappeared - I have no idea what hit it.  Fortunately, I saw the flash and guess what had happened and quickly you press 'save' on my request.  A few seconds later, my application has been closed as the machine restarted.

  I think that the bubble of Windows Update SHOULD NOT STEAL the KEYBOARD FOCUS.  I think it's dangerous and bad design.

  What is the best way to communicate this suggestion to the team of Windows Update?

  Is there a setting to stop Windows Update to do this?  (Stop stealing keyboard focus)

  I use Vista Home Premium

  I'm looking for a Microsoft solution for the specific problem I described, and/or advice on where post for better attention to Microsoft to "design problem".

  None of us are obstruction you. If we knew a way to avoid this problem (problem), we would have mentioned it earlier in this thread.

  You aren't the first person to complain about this and I'm sure you won't be the last. According to Microsoft, you have two options:

  1 use an automatic updates setting other Automatic (for example, download updates but let me choose whether to install them). or...

  2. turn off the automatic updates and get your updates manually (which I don't recommend).

  See...

  Windows Update for Windows Vista Help
  http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Adding printer series HP PSC2100 via the IP Port, type of printer does not show on the list of devices even when you are using the factory supplied driver disk.

  Installation D-Link DP-301U network home of three computers. I am able to access the printers using its IP address, Setup has worked with Vista Ultimate system but two systems of Windows XP Pro (SP3) does not Printer series HP PSC2100 list when you use the 'Disk' during installation radio button. Is there a work around or Microsoft drivers to resolve this error?

  Hello William51,

  Thank you for your message.  Try the following steps to add your printer.
  Click "Start" > select "printers and faxes".
  Click on 'Add printer' > click 'Next' > select ' local printer, and then make sure that detect automatically is disabled
  Select "Create a new Port" and the arrow down to "Standard TCP/IP Port" > click "next".
  Click "next".
  Type the IP address and click on 'Next' > 'Finish '.
  You must then install the driver/software for your device.  You can use "Have Disk", download from website, or find your model.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Receives sound of digital audio to the speakers on HP a6433w when you are connected to the TV

  Hello, I need a hero, please. I connected my Panasonic TC-L42U5 TV my HP a6433w computer (Windows Vista), using a HDMI cable. Well, I use TV as a computer monitor. My goal is to get the TV to the sound output to my computer speakers, which are plugged into the sound card Realtek. All I really have to audo out on tv is digital coaxial out, and which is connected to the digital in on my hp. But I have no sound. What can I do? Thank you!

  Hello Ptero1,

  Default settings will be put to the analog jacks. You may need to check the settings to make sure they are defined for digital use.

  Maybe this article will help you http://goo.gl/9JATB

• How can I fix an error of script long when you are trying to convey, answer or dial in my e-mail program web verizon?

  I use my verizon webmail e-mail program. When I switched to windows 7 and ie8/9 I started having a long script error when you try to forward a message, reply to a message or just try opening a compose window. Verizon told me that it is either a windows 7 or IE prblem. Anyone know the answer?

  This is another type of script error that you normally see on a page Web, and it probably means that there is some problem with communication between IE and verizon. It is unclear what script, it is. After some research, it seems to be a Verizon problem introduced with its latest update. The only resolution seems to use one browser other than IE. See http://forums.verizon.com/t5/Verizon-net-Email/STOP-Running-Script-errors/td-p/277869 for the people at Verizon were correct, if you look at things * back what their new update does not work with IE, so it is a problem with IE. Steve

• How do I get the number of incorrect records when you use external tables

  Hi all, I have an external table DEPT,.

  DEPT. DAT

  20. ELECTRONICS

  10. SHOES

  30. CAMERA

  Select * from the Department; only 10 and 30 dept will be led as deptdescr for 20 that there are more than 10 in length so this record will go into the wrong file,

  y at - it count any query to display the folder or get any query to get the record to view the entries entries wrong file rather that will drop and see how much is rejected.

  Table:

  CREATE TABLE DEPT
  (
     DEPT        NUMBER,
     DEPTDESCR   VARCHAR2 (10 CHAR)
     )           ORGANIZATION EXTERNAL
    (  TYPE ORACLE_LOADER
       DEFAULT DIRECTORY BATCH_INBOX
       ACCESS PARAMETERS
         ( RECORDS DELIMITED  BY '\r\n'
                BADFILE  BATCH_BAD:'UPS_DEPT_LOAD_%p.bad'
                LOGFILE  BATCH_LOG:'UPS_DEPT_%p.log'
                NODISCARDFILE
      FIELDS  TERMINATED BY '|'
      MISSING FIELD VALUES ARE NULL
  (
  DEPT,
  DEPTDESCR
  )
                                  )
       LOCATION (BATCH_INBOX:'DEPT.DAT')
    )
  REJECT LIMIT UNLIMITED
  NOPARALLEL
  NOMONITORING;
  

  You can use the wrong file as the data file for another external table, with the entire line in a single field.  Please see the demo below.

  Scott@orcl12c > CREATE or REPLACE DIRECTORY batch_inbox AS 'c:\my_oracle_files '.

  2.

  Created directory.

  Scott@orcl12c > CREATE or REPLACE DIRECTORY batch_bad AS 'c:\my_oracle_files '.

  2.

  Created directory.

  Scott@orcl12c > CREATE or REPLACE DIRECTORY batch_log AS 'c:\my_oracle_files '.

  2.

  Created directory.

  Scott@orcl12c > CREATE TABLE DEPT

  2       (

  NUMBER 3 DEPT,

  4 DEPTDESCR VARCHAR2 (10 CHAR)

  (5) ORGANIZATION EXTERNAL

  6 (TYPE ORACLE_LOADER

  7 DEFAULT DIRECTORY BATCH_INBOX

  8 ACCESS SETTINGS

  9 (RECORDS DELIMITED BY "\r\n"

  10 BADFILE BATCH_BAD: 'UPS_DEPT_LOAD.bad'

  11 BATCH_LOG:'UPS_DEPT_%p.log LOGFILE'

  12 NODISCARDFILE

  13 FIELDS TERMINATED BY ' |'

  14 MISSING FIELD VALUES ARE NULL

  15       (

  DEPT 16,

  17 DEPTDESCR

  18       )

  19                       )

  LOCATION 20 (BATCH_INBOX:'DEPT.) DAT')

  21         )

  RELEASE 22 UNLIMITED LIMIT

  23 NOPARALLEL

  24 NOMONITORING;

  Table created.

  Scott@orcl12c > SELECT * FROM dept

  2.

  DEPTDESCR DEPT

  ---------- ----------

  10 SHOES

  CAMERA 30

  2 selected lines.

  Scott@orcl12c > CREATE TABLE DEPT_bad

  2       (

  3 the_whole_row VARCHAR2 (4000)

  (4) ORGANIZATION EXTERNAL

  5 (TYPE ORACLE_LOADER

  6 DEFAULT DIRECTORY BATCH_INBOX

  7 ACCESS SETTINGS

  8 (RECORDS DELIMITED BY "\r\n"

  9 NOLOGFILE

  10 FIELDS TERMINATED BY '\r\n '.

  11. THE MISSING FIELD VALUES ARE NULL

  12       (

  13 the_whole_row CHAR (4000)

  14       )

  15                       )

  16 RENTAL (BATCH_BAD:'UPS_DEPT_LOAD.) THE BAD ")"

  17         )

  RELEASE 18 UNLIMITED LIMIT

  19 NOPARALLEL

  20 NOMONITORING

  21.

  Table created.

  Scott@orcl12c > SELECT * FROM dept_bad

  2.

  THE_WHOLE_ROW

  --------------------------------------------------------------------------------

  20. ELECTRONICS

  1 selected line.

• How can I keep the appearance of Zapf Dingbats when you convert InDesign EPUB?

  I have a series of four stars between the sections of the chapters but when converted to EPUB, they turn into circles.

  How the appearance of the stars can be maintained in the conversion?

  After that the stars are turning to Cambria circles what I did is to delete the parastyle Normal (it is replaced by parastyle base), remove the operating system, and then replace the police Zapf Dingabts, open the glyphs Panel and enter the stars. In this way the stars export properly. If I find more I'll let you know.

• How can I remove the info bubble can appear when you use the patch tool?

  Removing the unwanted parts of an image or repairing older images, the tool most used by me is the patch tool. When I select a patch and move a bubble with measures to know how far I moved this patch appears and seems to ALWAYS be in the way. Some areas to repair are extremely magified and can make or break a natural looking image or not. Darn measure bubble seems to be placed in the possible location of the worst for the exact location of small elements. How can I activate this info bubble from popping up as I'm not why she's still here?

  You can disable it in Photoshop (Edit) > Preferences > Interface by setting the values of Transformation Show Never