Similar Questions

• How do I auto detects the target using the trigger VBAI mode

  Hello world

  I had a vision system of machine ready to take choose using VBAI 2013 sp1.  Also, I use a sensor switch to trigger the camera to take pictures.

  When I type the loop running, it just won't continue to take photos no matther switch sensor triggers the camera or not.  I think it's the step that I used for the recording of the image, in the stage of registration of the image, I used picture newspaper still, but I don't want to use which is only what inspection status allows no other choice.

  So, how can I let the unit wait until he got the trigger of the alarm switch signal, and then take a picture and save the image?

  the stage of inspection to acquire the image, I used the trigger mode and everything worked fine, except the time error settting upward, I used 5000ms and if I put bigger like the 50000ms, VBAI turned really slow and showed time out error.

  If anyone can help me on this matter?

  Thank you

  You can use the diagram States-transitions to go only in a State based on the result produced by some steps.

  First, remove the registration step of the image of the State to check with you get the image

  Press Ctrl + E to turn the main view on the state diagram.

  Right click and create a new State.

  Right click on the State to inspect and create a new transition to this new State.

  Double click on the transition to edit it.

  Choose to acquire the Image - waiting time and set the condition false, to spend in this state when there is no timeout.

  Move the default transition from that State to the final State.

  Click on the new State to select it, and then add the image registration step.

  Using a state diagram, you have programmed an inspection that will record the image when there is no timeout.

  The State-transition diagram is a powerful tool to add a logic, branching and looping of your inspection.

  Open the tutorial 5 - state diagram Branching.vbai and tutorial 6 - State chart Looping.vbai for examples on how to use it.

  I hope this helps.

  Christophe

• How can I restore my computer to factory settings with using the computers original disc?

  Original title: ' ideas: insert an error code or give a brief description of what you're trying to accomplish or difficulty. " __ »

  I want to know how I can restore my computer settings to factory with using the original disk of computers or to create a recovery disk

  Here you are options to reinstall Vista:

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I stop the process using the trigger Disqualification?

  How can I stop and start the process using triggers in Disqualification?  While planning a job, I can not able to see the folder of trigger / trigger name in the tool palette? What kind of file should be placed in the Triggers folder. If you know someone, let me know. If someone has shared an example script which is very useful for me.

  Thanks in advance.

  Malila Chandra.

  It is a common use case.

  You create a job that has a closed Web Services trigger configured before executing the first phase (right click on the stage in the Task Manager, select Configure, you will then see this screen below), with the work or or jobs you need to added stop. This must be configured to be 'blocking', i.e. the rest of the work expected on the triggering comprehensive action.

  

  Work should have a phase which refreshes the data staging, and another phase (or a phase of post trigger) that returns your work in normal real time (using the trigger on the job).

• How do you use the creative cloud with using the internet.

  How do you use the creative cloud with using the internet.

  You MUST have an internet connection to download and activate the programs

  After this, you MUST have a connection to the programs check your subscription on the calendar below

  Cloud status check 30-or-99 days https://forums.adobe.com/thread/1549838

• How dynamically update the role of oracle using the trigger

  How dynamically update the role of oracle using the trigger:
  
  I have svmanger owner of schema in the database. There are five tables belonged to svmanager.
  
  Table A, B, C, D, E.
  
  I have a role that is played only to these tables under the scheme: SVMANAGER_READ_ONLY
  
  now, if I create a new table F under svmanager. the role that svmanager_read_only does not work is updated, so the user had assigned role cannot access table F.
  
  is there a way to create the trigger for this role dynamically update any when a table is created or deleted?
  
  Thank you.

  I really really really don't suggest to do this - it's a bad habit. If possible I'd just adding the grant as part of the steps to the role on the new creation of the table.
  But for fun here's how you can accomplish this:

  create or replace procedure execute_grant(v_ddl in varchar2)
  is
  begin
     execute immediate v_ddl;
  end;
  /
  

  create or replace trigger catch_create_table_trg after create on schema
  DECLARE
  
  ddl_job number;
  ddl_str varchar2(50);
  begin
     IF ora_dict_obj_type = 'TABLE' THEN
  
         ddl_str := 'GRANT SELECT ON '||ora_dict_obj_owner||'.'||ora_dict_obj_name||' TO SVMANAGER_READ_ONLY';
  
         dbms_job.submit(job => ddl_job,
         what => 'execute_grant(''' || ddl_str || ''');',
         next_date => sysdate+(5/24/60/60));
  
     END IF;
  end;
  /
  

  Test it

  create table F (id number(1));
  

  Validate

  select * from ROLE_TAB_PRIVS where ROLE = 'SVMANAGER_READ_ONLY';
  

• How can I stop Photoshop CS4 create a new layer each time I use the online tool?

  How can I stop Photoshop CS4 create a new layer each time I use the online tool?

  Whenever I use the online tool, a new layer is created. How can I stop this? No settings have been changed.
  
  Thanks in advance.

  Look at the three options in the top bar.

  

• How to choose the maximum value in a column of a table by using the cursor and iteration

  Hello everyone
  I have a table loan_detail
  and a column inside loan_amount
  now I want to take the values in this table with the cursor, then using iteration that I want to take a max value of him using this slider
  Here is my table

  LOAN_AMOUNT
  
  100
  200
  300
  400
  500
  5600
  700

  I could make using the concepts of single loop, but when I tried to do by using the slider I wasn't able to do.
  Concerning
  Prost

  You can get the maximum value for a particular column in SQL, PLSQL needn't; Always avoid PLSQL so you can do it in SQL. But always as an example:

  declare
  number of Temp: = 0;
  Start
  for news in some loan_amt of loan_detail
  loop
  If (temp
  end if;
  end loop;
  dbms_output.put_line (temp);
  end;

  Edited by: Mahanam January 5, 2011 03:11

• How can import an audio cd in iTunes on my new Mac mini using the SuperDrive in my old MacBook? I have enabled file sharing

  I have a new audio cd and I try to use the SuperDrive in my 2009 MacBook (running Yosemite) to import into my library current itunes on my Mac mini to 2014 (running El Capiten). I have enabled file sharing and when I click on remote disc in my mini Mac finder it lists my MacBook and I can see the Conference on disarmament, but it will not import into iTunes.

  is this possible? If so, how?

  Thanks SteveKJ

  On the Mac with optical drive is the DVD or CD sharing checked in system preferences > sharing?

• How to kill a process that won't die in Win7 when I use the Task Manager to end?

  How can I terminate a program (kill a process) which does not take account of any attempt by the Task Manager to kill the process?  The program is MagicJack.exe.  It's a * program 32.  Win7 v7200 it contains no message.

  You can use the program 'process explorer' written by mark russinowich from sysinternals... it is available on the microsoft Web site... try the link below and you know what I mean...

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx
  Best regards, H.M. KOWSHAL a.k.a W@R10CK

• How to concatenate values based on multiple columns of data duplicate in the loop

  Hi all

  Select '100' col_1, '111111' col2 of double

  Union of all the

  Select '100' col_1, '222222' col2 of double

  Union of all the

  Select '101' col_1, '333333' col2 of double

  Union of all the

  Select '102' col_1, '333333' col2 of double

  I need to write by using cursor loop (configurable) so, it must concatenate col_1 or col_2

  If,

  In the table

  col_1, col_2

  100 111111

  100 222222

  101 333333

  102 333333

  Then

  col_1, col_2

  100 111111,222222

  333333 101 102

  Is it possible to compare and concatenate values in the loop

  I have more than 4,000 bytes in the table of col_1,col_2 data values

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  Ok then:

  create a type that makes "grouped" clob

  CREATE or REPLACE TYPE clob_obj IS OBJECT
  (
  CLOB theClob
  ORDER MEMBER FUNCTION equals (in_clob_obj IN clob_obj) RETURN NUMBER
  member function getClobVal return clob)
  /

  CREATE or REPLACE TYPE clob_obj BODY
  IS
  FUNCTION MEMBER ORDER is equal to (in_clob_obj IN clob_obj)
  RETURN NUMBER
  IS
  BEGIN
  RETURN sys.dbms_lob.compare (SELF.theClob, in_clob_obj.theClob);
  END;
       
  Member return clob getClobVal function
  is
  BEGIN
  Return self.theClob;
  end;
  END;
  /

  WITH conc_table AS (SELECT 1111 cust_id, cust_no 'ABC', '101010' ordr_no OF DOUBLE UNION ALL

  SELECT 2222 cust_id, cust_no 'ABC', '101010' ordr_no OF DOUBLE UNION ALL

  SELECT 3333 cust_id, cust_no 'ABC', '101010' ordr_no OF DOUBLE UNION ALL

  SELECT cust_id 4444, "CCC" cust_no, ordr_no ' 123456' OF DOUBLE UNION ALL

  SELECT cust_id 5555, "CCC" cust_no, '454545' ordr_no OF DOUBLE UNION ALL

  Select cust_id 66666, "CCC" cust_no, ordr_no ' 77777' DOUBLE UNION ALL

  SELECT cust_id, "CCC" cust_no, ordr_no ' 77777 66666' FROM DUAL)

  SELECT rtrim (XMLAGG (XMLELEMENT (E, cust_id_no, ',')). EXTRACT ('customer_id //text()').getClobVal (),',')

  clob_obj (ord_number) .getClobVal)

  cust_num

  FROM (SELECT cust_id_no

  cust_num

  rtrim (XMLAGG (XMLELEMENT (E, ord_num, ",")). EXTRACT ('//text ()') .getClobVal (), ',') ord_number

  FROM (SELECT DISTINCT cust_id_no, cust_num, ordr_no AS conc_table FROM ord_num cust_no cust_id)

  GROUP BY cust_id_no

  cust_num)

  GROUP BY clob_obj (ord_number)

  cust_num;

  I got the distinct in the select more intimate for no duplicate of the basetable is only sent to reunification of...

  HTH

• How to set a field EO based on several fields of VO with validation?

  I'm thinking bad to the top of the best way to design the following requirement:
  
  EO has a field in a table - combination_id (which is a foreign key to a separate table, say its called xxx_combinations)
  VO emerged from EO, but get the combination_id on xxx_combinations and retrieves the 7 fields that make up the combination.
  Screen has 7 individual fields, say Field1 through field7.
  The user enters the values for all the fields of 7.
  
  That has to happen is the 7 fields must be validated to ensure that they are a combination eligible (logic quite complicated to determine which combinations are allowed/denied - this is done by calling pl/sql). Assuming that the combination is valid, the 7 fields are searched in xxx_combinations, to return to the combination_id (and if the combination does not exist, it is created). This combination_id should go to the area of occurrence and saved.
  
  I'm not really sure how to do this. At what level I would validate 7 fields and get the real combination_id to go back and update the EO? It almost seems that I need the OS to have all 7 fields in it, not just the combination_id.

  Hello

  Finally call the Pl/sql procedure to validate the combination of the code of the validateMethod id & validate each field individually from the setattribute method. I think that this will be the best approach for your condition.

  Kind regards
  GYAN

• How can I use highlighting conditional to assign a cell using the value of another cell

  I would use conditional highlighting on a cell based on the value of another cell.

  For example:

  If K2 is 1, then I would than A4 Green

  Any suggestions?

  Hi louis,.

  This approach is to add a cell to compare your target for:

  

  Highlight the rule in this case:

  

  Quinn

• How do you define a value for a list item select (LOV) with Javascript?

  I am trying set the values for a group of elements in a dynamic way, based on a selection of a report. Everything works fine, but the selection list.  What I have so far is the following:

  		get var = new htmldb_Get (null, $v ('pFlowId'), 'APPLICATION_PROCESS is REFRESH_LIMIT_TYPE', $v ('pFlowStepId'));
  		var gReturn = get.get ();
  		$x('P10014_LIMIT_TYPE').value = gReturn;

  My guess is that a Select list of an LOV is more complicated than a text or a single display element.

  Thanks in advance for your help,

  Jim

  Thank you user - placed you me in the correct district-

  $s ('P10014_LIMIT_TYPE', gReturn); -This update value, but not the displayed value.

  Apparently LOVs require two values ('P10014_LIMIT_TYPE', return_value, display_value) $s;    Then I changed my code-

  ".. gReturn a = 44001, now = ' 44001, ASSUMPTION..."

  var args = gReturn.split(",");

  var r = args [0];

  var d = args [1];

  $s ('P10014_LIMIT_TYPE', r, d);

• display value based on condition

  Hi all
  
  Do not know if my subject is the most descriptive, but don't know how to explain in a sentence.
  
  I have wells that may have several statutes (one record for each State). I need to create a column to display a Y or N from or not a given wells has only certain articles types. If all the records of a given good Susp or Abd, so I want to display a Y. If good records include Susp or Abd, but also the other articles (or do not even have a status of susp or abd) so I want to display a N.
  
  So:
  

  Well           Status       ident
  12345         SUSP          Y
  12345         SUSP          Y
  12345         ABD           Y
  98765         SUSP          N
  98765         PROD         N
  98765         ABD           N 
  45678         SUSP          Y
  45678         SUSP          Y
  ASDFG         ABD           Y
  ASDEG         ABD           Y
  TTTTT         PROD       N
  TTTTT         TEMP       N

  Any thoughts?
  
  Published by: dgouin on December 13, 2012 06:59

  Hello

  Here's one way:

  SELECT     well, status
  ,     CASE
           WHEN  EXISTS (
                            SELECT  1
                      FROM    table_x
                      WHERE   well     = m.well
                      AND     NVL ( status
                                      , '?'
                            )     NOT IN ('SUSP', 'ABD')
                        )
           THEN  'N'
           ELSE  'Y'
       END     AS ident
  FROM     table_x  m
  ;
  

  Another way uses analytical functions:

  SELECT     well, status
  ,     MIN ( CASE
                 WHEN  status IN 'SUSP', 'ABD')
              THEN  'Y'
              ELSE  'N'
             END
           ) OVER (PARTITION BY well)     AS ident
  FROM     table_x
  ;
  

  This 2nd request is based on the fact that "n" comes before "Y" is sort of chain order. If you use other symbols, such as 'J' and ' n ", then you may need to use MAX instead of MIN above."

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).
  See the FAQ forum {message identifier: = 9360002}