How do I error on vista? __

Similar Questions

• How to fix error with vista service pack 1 - cannot reboot in safe mode or regular

  tried to download vista sp1 - cannot start in safe mode or regular - enabled more than an hour to download - black screen-a chosen start normally - tried to start - at least 35 min. with the screen - in the suite! oxco1a001d! 28802/95712-{Registry\machine\components\DeriveData} - then tried to start in safe mode - says something was wrong - ran progran details - leaving - help, please4

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and read this:

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• How to fix error code 643 in windows vista

  How fix the error code 643 for windows vista when you try to install the updates.

  See if this sugesstion can help you:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/4a6ea38b-9104-4547-8802-bc94bb6127a9 >

• How to fix the 2343 error in Vista

  When I try to install programs on it I get the message no install Error 2343 contributions. How can I fix this error in Vista Ultimate 64-bit

  Hi graycat2,

  1. What is the full error message that you receive?

  2. did you of recent changes on the computer?

  3. you receive the error message when you install programs on the computer?

  4. do you have security software installed on the computer?

  Method 1

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start tocollapse that includes this image, type services.msc in the Search box and click on OK

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

  Method 2

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you place the computer in a clean boot state, and you try to install the program.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

• Failed to update ERROR 8024200d Vista (KB967723)

  ERROR 8024200d Vista (KB967723) update failure how can I get this update never does not update.

  Kevin76261,
  Try these items:

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825 Mike - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to fix error 0 x 80092003

  How to fix error 0 x 80092003 in attempts to exploit fix in Windows Vista?

  Difficulty it uninstalled and reinstalled.  Fixed issue with no error code.

• Try to load software PhoneTree and I continue receiving ADODC error code. What should I do to install the software? How can ADODC error be corrected?

  Try to load software PhoneTree and I continue receiving ADODC error code.  What should I do to install the software?  How can ADODC error be corrected?  I have Windows VISTA

  Hello

  Thanks for posting your question in the Microsoft Community.

  From the description of the problem, you are not able to install a belkin wireless adapter. I'll be happy to help you on this question.

  You did changes to the computer before the show?

  Method 1: I suggest you to run the fixit from the following link:

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: I suggest you perform the clean boot and check if the problem persists.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• How can I stop windows vista without updating the updates

  How can I stop windows vista without updating the updates because it affects my computer in error mode and I have to restore to get vista to startup after I reopen it later

  Hello

  You can change the settings for windows update to check for updates but let me choose whether to download and install them.

  Change how Windows installs or notifies you of updates

  You can also check in the update to the update history recently failed, double-click the update to get the error code and let us know.

  See the Windows updates are installed

  You can also read the following article to reset the Windows Update components and check.

  How to reset the Windows Update components?

• Error Windows Vista Sidebar

  For the last couple days, whenever I connect to my computer, I get the following error message: Settings.ini is being used by another process.  Close other programs, and then click Retry or Cancel to exit sidebar.  I do not use the sidebar on my desk & want to know how to solve this problem.

  Thank you.

  Hello

  Check your startup programs to determine if you have something called the sidebar.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry and
  locations where applications can configure Auto-start of the file settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How to fix error 30?

  How to fix error 30?
  I can print online from IE but don't want to.
  Thank you

  Hello

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• How to solve error HRESULT: 0 * 8007054f?

  How to solve error HRESULT: 0 * 8007054f?

  On which Mac or your mobile device, with which operating system?

• How can I recover my Vista and remove Windows?

  Hi, my daughter send me Windows 7 since the Switzerland and said it can be installed in 3 PC, I install and now can not register because it is not the case and I need to remove the Windrow and revert to Vista 32, I download the recovery disc for my Toshiba but how I can recover my Vista and Windows delete & is not unclear to me. I was told that it is very easy to do if you know how.

  > I have download the my Toshiba Recovery disk
  I put t know what you downloaded, but you have not downloaded a Toshiba Recovery disk because the recovery disc can not be downloaded!

  > but how can I recover my Vista and Windows delete
  If you have an original Toshiba recovery disc then put it in the CD/DVD drive and the start of this drive.
  The recovery disk would start and you should follow the instructions on the screen.

  Installation of recovery disk would format the whole HDD (!) which means you n t need to delete anything before starting the installation of the recovery disc! Recover disc remove everything!

• How can I reinstall Windows Vista?

  I have a Toshiba laptop with Vista installed ready recently, but what happens if, at some point in the future, I need to reformat?
  How can I reinstall Vista without a disk?

  Thank you.

  I think that you have not looked in the user manual. This, because there you can find a lot of information how do I reinstall Windows Vista.

  However, the computer Toshiba laptop with Vista have a HARD drive recovery function. On the second partition is a file called "HDDRecovery". It contains the image of the factory settings, and so you can reinstall the laptop without CD/DVD.

  In addition, you can also burn the recovery disks with the Toshiba recovery disc creator and you should do it too. If a faulty HARD drive or something else you need this floppy and otherwise, you must pay for it.

  Normally, you should get the message of reminder of recovery on your laptop and it contains interesting information:

  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• Re: How to enable infrared in Vista?

  I had to reinstall Vista but can't get the remote to start Media Center now.
  I think that it s an infrared thing, I don infrared see t in Device Manager

  I have the link defined driver but don't see how to activate infrared in Vista or how to install windond.

  Help please

  Hello

  The infrared receiver window which is provided ONLY with some models receives signals from remote control that is included with some models.
  It s not an infrared interface for file transfer!

  I guess that your phone does not support this sensor if the remote control was not planned and delivered with your laptop

• How to clean errors registry

  How to clean errors registry

  You do not have.  Unless there is a specific problem with the registry, I recommend you leave it alone.  Registry cleaners so-called are about a step above snake - unnecessary oil and probably actually harmful when it is used.