How to clean errors registry

Similar Questions

• How to clean the registry files

  Hi I have an application installed and uninstalled too... and I just want to remove all the details of this request to register... Can someone help me with this...

  Thank you best regards &,.

  Maton

  Hi I have an application installed and uninstalled too... and I just want to remove all the details of this request to register... Can someone help me with this...

  Thank you best regards &,.

  Maton

  Do not do this.  There is no need to do it and make a mistake if you change the Windows registry may be unrecoverable without a clean reinstall.

  I didn't write what follows, but it's a good tip:

  If you ever think that your registry database must be cleaned, repaired, amplified, to the point, cured, twisted, fixed or optimized (it isn't), readhttp://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to fix and clean Windows registry

  I want to know toll-free how Fix and clean Windows registry and repair registry problems with a tool:

  Easily open/repair. DRF files

  Optimize and increase the performance of the PC (up to 150%)

  Protect privacy and files everything online

  Start and stop more quickly

  Eliminate and prevent most accidents

  Eliminate the computer slowdowns

  Protection against malware

  Note: I use the Version of Microsoft Windows Vista Ultimate 32-bit.

  Hopefully I can get the help I need.

  e-mail: * address email is removed from the privacy *

  They are never recommended by Miscrosoft, but MS himself admits this register of overtime fills and creates problems. Registry Cleaner, I think, is the only one built in the MS utility missing in its operating systems.

  Microsoft Windows Live OneCare safety scanner had a free registry cleaner .

  As you can see live One Care has been abandoned

  And read this information and the views of these Forums on registry cleaners:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/is-there-a-Microsoft-licensed-registry-cleaner-i/b03cd0ad-A92C-41B2-9bf0-b7be06c43047

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/does-Microsoft-have-a-software-that-cleans-repairs/4545749b-3c3e-41bf-8f9a-326a58135088

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/which-is-the-best-registry-cleaner-for-Vista/cb1d3b65-4396-4A42-b83c-a1db7602ba06

  See you soon.

• How to clean registry in version 11.1.2 hyperion.

  Hi all

  I met so many questions in hyperion planning to installation. so, I uninstalled Hyperion from the server, but I need to clean my registry to start the installation again. but I'm not able to find that a topic registry clean utility.

  Could you please if you know any registration process for registry cleaning.

  First of all uninstall hyperion for help to uninstall the utility, if necessary through:

  http://hyperionplanningandmore.blogspot.in/2013/05/clean-uninstall-1112x.html

  If its 11.1.2.2 you can consult:

  http://hyperionplanningandmore.blogspot.in/2013/05/registry-cleanup-utility-and-XML-which.html

  Research on the forums posts, you will get many other partners, let us know if you get a specific error message, and the exact version of the EMP you try hands.

  See you soon...

  Rahul S.

• How to clean my disk overloaded space in C drive? Almost complete. Says "low disk space". Thank you in advance.

  How to clean my disk overloaded space in C drive?  Almost complete.  Says "low disk space".  Thank you in advance.

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, and place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Follow a few basic maintenance note.

  1.5 the tool provided in Windows to remove unwanted temporary files is disk cleanup. To access this tool select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. You must then run Disk Defragmenter.

  1.6 using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before that the error occurred initially, do not use this option.

  1.7. If more than one person uses the computer and they have their own user log you need to run Disk Cleanup in each user profile that you want to delete all the unwanted files.

  1.8. a better alternative program to disk cleanup is cCleaner. The freeware version works well for a home user and must be downloaded from Piriform program provider:
  http://www.CCleaner.com/download

  1.9. When you open cCleaner you will see four large icons to the left of the window. Here's cleaner them, registry, tools, and Options. For routine maintenance, you normally acceding Cleaner (this is not the mentioned registry cleaner later). When using for the first time only, you can accept the default settings.

  1.10. some observations on the parameters. On my computer, I do not have the boxes before the passwords saved selected. In a less secure environment, you could check this option and set cCleaner to run automatically when the computer starts. You also cannot check the boxes in front of shortcuts from the Start Menu, desktop shortcuts and historical form. You must check the boxes according to your needs. Bad first time options causes irritating no disasters.

  1.11. the second icon that you see when you open cCleaner's registry. A reserve many experienced users have about cCleaner, it's that it comes with a registry cleaner. This tool should not be used. By using a registry cleaner, but it is the case, provides significant benefits and there is always the risk of creating insoluble system errors, which cannot be resolved by reinstalling the operating system and all that that implies. You will avoid any possible problem of not not by clicking on the Save icon.

  1.12 the third icon that you see when you open cCleaner is tools. If you click this icon, it gives you access a routine plus service options. The first two tools are uninstalled and commissioning. I do not use these tools, preferring to use other software options. The third tool is the restoration of the system, which is covered in the next paragraph. The fourth tool is Wiper Drive and you will find reviews about this tool later

  1.13 removing the system restore points can be important if you have little free disk space. The ability to delete them is one of the tools options. You can selectively remove those created in less important moments. This makes it easier to hold the restore points for long periods without keeping large unwanted files, whose inflexible approach to disk cleanup fails to offer.

  1.14. you can't remove the last restore point using the cleaning disc or cCleaner. If the last restore point contains malicious software, you can turn off and then turn on system restore. This has the disadvantage that restore all points are removed when you want to keep more restore points that are not infected. How to get round this problem is to create a new restore point when you are satisfied with your computer is free of malware and then remove the infected restore point.

  1.15. in normal circumstances, you probably rarely need to use Driver wiper. However, there are situations like if you gave the computer to someone else, then the tool may be useful. Please note that the wiper Drive, opening, generates a warning message, which should not be dismissed lightly. Using wiper Drive for the wrong reason could have serious consequences.

  1.16 the fourth icon is labeled Options. Many configuration options are available here. You can configure cCleaner to run when start you but remember that this will slow down the boot. Another setting allows you to include or exclude cookies. Yet another allows files named to exclude.

• I need to clean the registry because it has not been done in a long time.

  I need to clean the registry because it has not been done in a long time.  I can't find any software cleaner that cleans all teasers just identify errors and clean up maybe 3 things, but you need to buy to do it all.

  What can I do?

  Do not.  He didn't need it and even if you deleted 1000 things from him (doubtful) it would make little or no impact on performance.

  If you don't understand the registry enough to know what to erase manually or how to add things yourself, etc. - using a tool that almost arbitrarily find the things that are supposed to be orphaned or not necessary and confidence (for some reason any) can lead to a system of death.

  If you just * have to * ("it's a moral imperative") and then use that integrated with CCleaner.  I generally recommend not even consider using its registry "cleaning" component - but in the many times I used to analyze and find things and go through them manually before I remove them (at least - I've seen ~ 250 entries, he suggested to get rid of and even in this case, my manual check led me to delete all and there was no adverse) I didn't it go wrong.  If you * MUST * do it, use it and save your changes, so you might be able to roll back.  Before do you all - make sure your backups are in order.

  Want generally cleaning XP and maybe actually get a performance gain?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do some cleaning and dusting off this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your WIndows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• How to clean the virus from my macbook pro

  How to clean the virus from my macbook pro

  What makes you think that you have a? Error message?

• Pavilion x 2: recovery drive full, how to clean it?

  My computer keeps popping up an alert that tells me that my recovery disk is full. How to clean it? Even when I clean my C drive, he cleared only for a few weeks, then the alert on the recovery disk (D) is complete.

  Hello

  Unfortunately, it is not possible to simply move the folder - there will be too many other references to it (registry, etc).

  What I would say is to try to uninstall all software printer since entering programs and features (with a bit of luck, the uninstall routine will have the correct path) - If this is successful, restart the laptop.

  When windows rebooted, open the recovery partition D and Remove the Program Files (x 86) folder.

  Restart the laptop again.

  To restart, if everything looks now Ok - no space warning disk etc. - you can download the installation package of the printer at the following link.

  http://ftp.HP.com/pub/softlib/software12/COL28119/MP-109702-2/PS_AIO_06_C4700_140_408-4.exe

  Kind regards

  DP - K

• How to clean a regitsry for good

  How can I clean the registry for good

  Start cleaning.  Install only what you need.

• Try to load software PhoneTree and I continue receiving ADODC error code. What should I do to install the software? How can ADODC error be corrected?

  Try to load software PhoneTree and I continue receiving ADODC error code.  What should I do to install the software?  How can ADODC error be corrected?  I have Windows VISTA

  Hello

  Thanks for posting your question in the Microsoft Community.

  From the description of the problem, you are not able to install a belkin wireless adapter. I'll be happy to help you on this question.

  You did changes to the computer before the show?

  Method 1: I suggest you to run the fixit from the following link:

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: I suggest you perform the clean boot and check if the problem persists.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• How to clean boot

  How to clean boot

  Hello

  read these tutorials

  This article describes how to start your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot". This article also provides information that you can use to o solve conflicts of service or application.

  http://support.Microsoft.com/kb/331796

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista or Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  http://support.Microsoft.com/kb/929135

• How to clean the polymorphic infections

  How to clean my computer polymorphic infections?

  Hello

  1. do you get an error message or error code?

  2. you remember changes to the computer before the show?

  Professional protection antiviruss can use bait files to study the behavior of a virus and evaluate detection methods. This is particularly useful when the virus is polymorphic. In this case, we can do the virus infect a large number of files of the bait. Infected files can be used to test whether an anti-virus detects all versions of the virus. A polymorphic virus infects files with an encrypted copy of itself.

  You can download Microsoft Safety scanner, which provides on-demand scan, and remove viruses, spyware and other malicious software. It works with your current antivirus software.

  See the link below to download Microsoft Safety scanner on the system.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning:

  The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  It will be useful.

• Updating of data base of production for test - how to clean the existing test env

  All,
  
  My environment is
  
  Test and Production databases are two nodes in RAC environment
  
  Oracle - 10.2.0.4.0 version
  OS - RHEL5
  80 GB production database size
  
  We need to update the database of production test environment. Complete objects, etc. need to be updated.
  We have a datapump export from the production environment. With this release of export of the production environment, I need to import in the test environment.
  
  So far, I imported with this kind of dump of the fresh database only.
  Now, we already have objects, data, sitting in the test environment. How to clean the existing test environment and refresh the discharge of export production datapump.
  
  
  I thought dropping all tablespaces in test (off system, sysaux, cancel and temp). But not able to drop some storage space, it is revealing that the index is available in other storage spaces, errors etc. of dependence.
  
  Which is the best method to clean the existing test database. Management is not interested in the fall of the test database and recreate.

  Why not just drag the users that you are refreshing? DataPump will create users with all the privileges, objects, data, etc. of prod.

• I have to get my macbook to my employer. How to clean it upward?

  I have to get my macbook to my employer. How to clean it upward?

  Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 earlier, when you get to step 5, insert the original disc, restart with the C key or Option key, use disk utility to erase the internal drive and install a fresh OS.

  (144311)

• How to fix error 30?

  How to fix error 30?
  I can print online from IE but don't want to.
  Thank you

  Hello

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.