How do I get into Windows XP, don't remember password to open

Similar Questions

• How can I get the Windows Fax and Scan program to scan mutiple page to a file rather than to each page into a separate file?

  How can I get the Windows Fax and Scan program to scan mutiple page to a file rather than to each page into a separate file?

  You don't, so use the scanning software provided by your device manufacturer, assuming that you have installed the unknown device with their installation cd or the download direct the full version of this site to the

• How can I get Firefox 9.0.1 to remember form data? (I use Windows XP. Yes, I already looked under tools/options/privacy and don't see anything useful.)

  How can I get Firefox 9.0.1 to remember form data? I use Windows XP. Yes, I already looked under tools/options/privacy and don't see anything useful. I don't see that 'monitoring' and 'bar' on the Privacy tab. The previous version I was using shape data stored without any problem. I can't get 9.0.1 to remind OF THE form data.

  'Re missing you the section history of this window. See the screenshot I posted below.

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• How to remove the Windows 7 Administrator user when I can't get into Windows

  My laptop was stolen, and all the disks.  When it was recovered by the police, it was returned to me with a password protected user account.  I tried the steps to connect safe mode, but that the same user account is presented as the administrator account.  I can't recover the system, given that the recovery disks were never me returned (very probably not recovered by the police) - even with the OS install disk, flew with the computer.

  How can I get into my computer and get back to work again?

  My laptop was stolen, and all the disks.  When it was recovered by the police, it was returned to me with a password protected user account.  I tried the steps to connect safe mode, but that the same user account is presented as the administrator account.  I can't recover the system, given that the recovery disks were never me returned (very probably not recovered by the police) - even with the OS install disk, flew with the computer.

  How can I get into my computer and get back to work again?

  Use your Windows repair CD to start the computer in Repair Mode, and then use the system restore to set Windows to the Restore Point as soon as you can find. The chances are that this will be a point before they changed the password.

• How can I get the windows update? X8024400A error)

  I did a restore after my pro windows xp crashed now can't do windows update! How can I get the windows update? I get an error from the site Web has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. X8024400A error)

  Please help me!

  I could not download my favorite Antivirus unable to get updates.  Only a few site I couldn't even. It seemed to get worse until:

  I fould a place that gave me these instructions:

  1. Reregister the BITS files and Windows Update files. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • Regsvr32.exe atl.dll
     • Regsvr32.exe urlmon.dll
     • Regsvr32.exe mshtml.dll
     • Regsvr32.exe shdocvw.dll
     • Regsvr32.exe browseui.dll
     • Regsvr32.exe jscript.dll
     • Regsvr32.exe vbscript.dll
     • Regsvr32.exe scrrun.dll
     • Regsvr32.exe msxml.dll
     • Regsvr32.exe msxml3.dll
     • Regsvr32.exe msxml6.dll
     • Regsvr32.exe actxprxy.dll
     • Regsvr32.exe softpub.dll
     • Regsvr32.exe wintrust.dll
     • Regsvr32.exe dssenh.dll
     • Regsvr32.exe rsaenh.dll
     • Regsvr32.exe gpkcsp.dll
     • Regsvr32.exe sccbase.dll
     • Regsvr32.exe slbcsp.dll
     • Regsvr32.exe cryptdlg.dll
     • Regsvr32.exe oleaut32.dll
     • Regsvr32.exe ole32.dll
     • Regsvr32.exe shell32.dll
     • Regsvr32.exe initpki.dll
     • Regsvr32.exe c:\windows\system32\wuapi.dll
     • Regsvr32.exe c:\windows\system32\wuaueng.dll
     • Regsvr32.exe wuaueng1.dll
     • Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll
     • Regsvr32.exe c:\windows\system32\wups.dll
     • Regsvr32.exe wups2.dll
     • Regsvr32.exe wuweb.dll
     • Regsvr32.exe qmgr.dll
     • Regsvr32.exe qmgrprxy.dll
     • Regsvr32.exe c:\windows\system32\wucltux.dll
     • Regsvr32.exe c:\windows\system32\muweb.dll
     • Regsvr32.exe c:\windows\system32\wuwebv.dll
  2. Reset Winsock. To do this, type the following command at a command prompt and press ENTER:
     netsh winsock reset
  3. If you are running Windows XP or Windows Server 2003, you must set the proxy settings. To do this, type the following command at a command prompt and press ENTER:
     Proxycfg.exe d
  4. Restart the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • net start bits
     • net start wuauserv
  5. If you are running Windows Vista or Windows Server 2008, erase the BITS queue. To do this, type the following command at a command prompt and press ENTER:
     Bitsadmin.exe/Reset /allusers
  6. Install the latest Windows Update Agent. For more information, click on the number below to view the article in the Microsoft Knowledge Base:
     949104 (http://support.microsoft.com/kb/949104/) how to obtain the latest version of the Windows Update Agent to help manage updates on a computer
  7. Restart the computer.

  After doing these, well most of them work. When I clicked on OK, but some are not. All of this worked!   I was able to update.  I was about to throw my computer!

  I don't know the tip you give here would have worked more quickly.  I just couldn't not here. Something was originally internet Exployer of do not leave me here.

  I had to work on him. Now everything seems to work very well. I have sort of my breatgh again and wory that error could haoppen again.

  1 million for your help thanks. It's great to have a place like this with pro like you here.  Much appreciated by a non pro like me.  Great place to learn more about computers.

• How can I get my windows reactivated as I can't use my old product key more that it is not accepted...

  The message says:-since first, windows has been activated on this computer, Windows must be reactivated within 3 days.

  The message says:-since first, windows has been activated on this computer, the computer hardware has changed a lot. Because of these changes, Windows must be reactivated within 3 days. You want to reactivate Windows now?

  How can I get my windows reactivated as I can't use my old product key more that it is not accepted...

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  Aalst certainly just use the actual activation.

  telephone activation.
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you.

• I get a message 'local disabled script' when I try to get into windows XP.

  I had bad sectors on my hard drive, so I had to try to repair my installation of windows XP. Now, when I'm trying to get into windows, it says I need to activate WIndows and I can't because scripts are disabled. Then he told me just that, and I can't do anything. It only disconnects. I tried safe mode, but it says I can't do it in safe mode and I have to activate in order to move forward.

  What can I do, if anything?

  PS Windows is authentic MSDNAA...

  Stjepan salvation,

  You can read the following article and check if it helps.

  Error message when you try to activate Windows XP: "local script has been disabled on this computer.

  Important: The above article contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the following article:

  How to back up and restore the registry in Windows

  Hope this information is useful.

• I forgot my password to get into Windows XP; My clue to help me only remember part of the password. What can I do?

  The modem on my computer went wrong & couldn't be fixed, so I bought a new computer.

  I took the hard drive from my old computer and installed in a tower, I had.

  Everything is up and running, but it's been so long, I don't remember my password to get into Windows XP.

  Is there anyway I can retrieve this password, or set up a new without having to reinstall windows?

  Thanks for any help.

  Frances

  Yes, there is, but we are not allowed to help you with that, because people will use this information for illegal purposes.

  Contact your local store for PC repair help.

• How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?

  How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?

  It allows only wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password, of which none seem to allow me to select a LAN (ISP) simple (without a password).

  I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; only the mail tool can't seem to see or use.

  Whenever I tell the Windows Mail email 'Send and receive', he wants to 'connect' for remote access or one of his three choices (listed above and direct exclusion of any connection to the local network).  It works with remote access, so once I have spend that I should be Ok. but I can't make it work directly.

  Help.

  In Windows Mail, go to select Tools, accounts, your account email, properties, connection.  It shows for the connection?  You
  should leave this setting not selected, in which case Windows Mail will use the IE connection uses.
   
  In addition, under Tools, Options, connection, the first checkbox must be checked, and the second box unchecked.
   
  If everything which withdraws, but you still have the problem, the account may be damaged.  Remove account, restart Windows Mail,.
  then recreate the account.
   
  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------
   
  "W6NCT" wrote in the new message: * e-mail address is removed from the privacy... *
   
  How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?
   
  They don't allow that wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password.
  which none seems to allow me to select a LAN (ISP) simple (without a password).
   
  I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; is not only the messaging tool
  to see or use.
   
  Whenever I tell the Windows Mail email 'Send and receive', he wants to "connect" to remote access or one of his three choices (listed
  above and to the exclusion of any direct connection to the local network).  It works with remote access, so once I have spend that I should be Ok. but I just
  cannot operate directly.
   
  Help.
   
   

  Gary van, Microsoft MVP (Mail)

• Why are all these answerse questions / answers for HOW DO I GET around WINDOWS 7's FILE PERMISSIONS? so old/otdated

  Why are all the questions & answers so old that in 2009-2011 & some in 2012 on the 1 to 12 pages on MICROSOFT WINDOWS from the COMMUNITY in respect of the question ' HOW DO I GET AROUND WINDOWS 7 FILE PERMISSIONS?  I'm sure people still encounter this same problem in 2013 because of course, I'm and worsened. Which means that we are all being denied access to the files that we have and have a right of access. I don't think this can be more clearly stated.  Thanks if you can answer this question. It is dated April 2, 2013

  You do not have any problems, or at least in detail where all permissions question arises, when you do what with what

• Is someone can you please tell me how I can get a windows XP installation disc?

  I have an old computer with windows XP that crashed recently. The thing is that when I bought the computer, it did not come with an XP Setup disk. So can someone please tell me how I can get a windows XP installation disc? I tried several ways to fix the computer. I installed a hard drive with win98 and tried to recover my files. Also, I deleted the original hard drive and installed win98 to try to connect to the internet so I could install Ubuntu or Pandora.

  I have an old computer with windows XP that crashed recently. The thing is that when I bought the computer, it did not come with an XP Setup disk. So can someone please tell me how I can get a windows XP installation disc? I tried several ways to fix the computer. I installed a hard drive with win98 and tried to recover my files. Also, I deleted the original hard drive and installed win98 to try to connect to the internet so I could install Ubuntu or Pandora.

  Windows XP disks are no longer manufactured or sold. You * may * be able to find a place with an old stock for sale, but it is not very likely. Close your only choice is to purchase a used copy somwhere (but I would avoid eBay, where any software you buy is probably hacked).

• HOW CAN I GET A WINDOWS XP BACKUP DISC?

  HOW CAN I GET A WINDOWS XP BACKUP DISC?

  Your computer came with Windows XP pre-installed?  If so, contact those who sold you the computer.

  John

• Is someone can you please tell me how I would get my Windows Vista calendar opens automatically when starting my computer to the top? Thank you!

  Is someone can you please tell me how I can get my windows vista calendar opens automatically when starting my cpu to the top? Thank you

  Put a shortcut to the calendar program in your startup folder:

  1. Click the Start button.
  2. Click Open .
  3. Double-click programs .
  4. Double-click Startup .
  5. Click the Start button.
  6. Click on all programs .
  7. Right-click Windows Calendar , hold down the button, drag it in theStart window and let go.
  8. Click copy here .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Verizon offer security update, but I need a password to accept. I don't remember password even with suspicion. How can I get a new password

  original title: administrator password

  Verizon offer security update, but I need a password to accept. I don't remember password even with suspicion. How can I get a new password

  If you're a Verizon with their helpdesk to get assistance with their password.

• I had windows 10 and it crashed my pc. A friend put a test windows 7 on my pc and now it says that it isn't geninue copy of windows. How can I get back windows 7?

  How can I get my windows 7 back, as if it was before? And I have to pay for this?

  Windows 10 crashed my pc, and I need help please

  Claire-

  The PC comes with Windows 7 the plant?  If so there should be a COA sticker on the outside, or under the battery with a product key used to activate.  Also on the label is printed the licensed version.  Now look at control panel > system to confirm page which is the version that has been installed.  If so, scroll down to the activation link to "Change product key" and insert the key to the sticker.

  It is easy to mistake the 25 digit key characters.  What I do is take a picture of the phone and huge blow up, so check each character before submitting the key.

  If Windows 10 had activated, you can also get a facility much better to do a Clean install Windows 10 improvement will be paid to questions of lower upgrade installation, which should reactivate with the permanent right granted once did you the upgrade.

  Let us know if that helps.