How do I know what license key to use.
I have 3 Windows XP upgrades. I have 2 computers currently XP and I would use my license to get a 3rd operational computer. I don't know which CD, I used to install in two more. How can I activate my 3rd computer. What Cd key to use?
Run Magical Jelly Bean Keyfinder on two other computers to see what product keys they use.
Tags: Windows
Similar Questions
-
When I boot my laptop with Vista, loads and gets on the desk on either primary or a guest account, a small box about 2 x 3 "appears for only a fraction of a second, but I can see there is a red X on the top right corner and two clickable buttons, but I can't read what it says. How will I know what it says; where can I go to find it. There is nothing in sysconfig on startup, etc.
You must have something in the system start, probably in one of the keys to registry Run, which is something you don't recognize to run at startup.
-
Can you tell me how do I know what I should delete to get as much space in a minimum of time?
Original title: my disk space is so small that I can't do anything. Can you tell me how do I know what I should delete to get as much space in a minimum of time?
Not enough disk space
Hello
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
You may want to transfer some data, images or documents on removable media like USB keys,
External USB (my choice) or even CD/DVD readers (make multiple copies if the use of these).-----------------------------------------------------
Info:
System restore usually holds 15% of disk space and updates that are necessary for running computer
consume even more. Backup - Options of recovery and even MS updates and those of HP, Dell
or similar manufacturers use the space if your charging system. There are also overhead for the readers are not
format to their maximum capacity.Where all my disk space? (Vista) - good writeup
http://Forum.NotebookReview.com/showthread.php?t=167983Hard disk space Vista shrinking and reducing anomaly
http://www.mydigitallife.info/2007/07/04/Vista-hard-disk-space-shrinking-and-reducing-anomaly/----------------------------------------------
It will show you how disk space is being used.
WinDirStat - free - use to make sure you know what is too much space.
http://WinDirStat.info/-Free - TreeSize tells you where precious space has gone to
http://www.Jam-software.com/treesize_free/Also run Disk Cleanup:
Start - All Programs - Accessories - System Tools - Disk Cleanup.
Use the WinDirStat or TreeSize and these other tools.
DiskMon - free - an application that logs and displays all the activity of the hard disk on a Windows System.
You can also reduce DiskMon in your system tray, where it acts as a disk light, presenting a green
icon when there is disk-read activity and a red icon when there is a writing activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896646.aspxProcess Monitor - free - a monitoring tool for Windows that shows real-time file system,
The process/thread activity and the register.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxManage - free - a utility that displays information about the handles opened for any process in the system.
You can use it to see the programs that have an open folder, or to see the types of objects and the names of all
the handles of a program.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896655.aspx-Free - Process Explorer shows you information about the handles and DLLs processes have
opened or loaded.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxSysinternals - many free tools
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx---------------------------------
OpenedFilesView - Free displays the list of all the open files on your system. For each file opened,
additional information is displayed: handle value, read/write/delete access, position in the file, the
process that has the file open and more...
http://www.NirSoft.NET/utils/opened_files_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
How will I know what ink cartridges are low?
I have a photosmart b210. How do I know what color cartridge becomes weak? been all over the apps through the screens of the printer and cannot find it ANYWHERE! help, please!
Hi Shinski_lynch,
What a nice printer.
He should ask on the front if the ink is low, but you can also follow these steps to see if you are running low on ink.
- Menu configuration (it looks like a key on the front panel)
- Click on 'tools '.
- Then click on "Display Ink Level".
- That displays the ink of your printer.
Please let us know if that solved your problem.
-
How does Card Crypto knows what ISAKMP policy to use?
ip access-list extended ACL_SITE1_TO_SITE2 permit ip 10.0.12.0 0.0.0.255 10.0.22.0 0.0.0.255 ! crypto isakmp policy 10 encr aes hash sha256 authentication pre-share group 14 crypto isakmp policy 20 encr aes 256 hash sha512 authentication pre-share group 16 crypto isakmp key cisco123 address 200.0.2.2 ! crypto ipsec transform-set [TRANS_SET]PHASE_2 esp-aes esp-sha256-hmac mode tunnel ! crypto map [CRYPT_MAP]VPN_SITE1_TO_SITE2 11 ipsec-isakmp set peer 200.0.2.2 set transform-set [TRANS_SET]PHASE_2 match address ACL_SITE1_TO_SITE2 ! interface FastEthernet0/0 ip address 200.0.1.1 255.255.255.0 crypto map [CRYPT_MAP]VPN_SITE1_TO_SITE2
How does Card Crypto knows what ISAKMP policy to use, or use of the ISAKMP policy at all?
It comes from "ipsec-isakmp?
I mean... I do not see any "set isakmp policy 10" in the Crypto map
This is what he chooses just the top-down approach?
As part of the negotiation of the phase 1 and is a top-down proposal based on the sequence number. You can get the details in tunnel using configuration:
Debug crypto ISAKMP
Cisco IOS has built/strategies default ISAKMP, but the pre 15.x versions were terrible default. New default values are strong, although I still like to configure them myself.
-
Original title: single language of windows 8
I had 8 single language on dell inspiron 15-3521 pre-installed windows. I did repartitioning disks and windows recovery options 8 as 'reset your pc' and "Refresh your pc" has stopped working, saying that the not found recovery partition, but it was intact. I have no recovery disk.
Can I get a configuration of single language somewhere? How can I find the license key for my installation.Hi Mohammed'metwally,.
Please answer this question to get more clarity on this issue.
The application or program that you use the partition of the drive?
This problem may occur if the partition table is damaged or altered. As a result, the recovery partition does not work. I'm sorry to know that you are facing this problem.
You will not get the unique language anywhere to download setting. You have an OEM computer that comes with the product key integrated into the BIOS. The product key of Windows 8 on new machines is now integrated in the machine. It uses the Secure Boot technology. When you perform a new installation of Windows 8, the installation program ask a product key and will be automatically get it from your system and proceed with the installation.
As Windows 8 came pre-installed, you must contact the manufacturer of the computer with this problem for more help.
http://en.Community.Dell.com/?~CK_=_mn
Dell technical support: http://www.dell.com/support/contents/us/en/04/category/Contact-Information/Technical-Support?c=us&l=en&s=bsd&cs=04
Thank you.
-
How can I know what ram slot ram in there on my G4 imac
OK so I have an imac G4 1 GHz version and I don't have any tools to open it to see what ram slots are empty for a ram upgrade how can I know what ram slot is free and opening the mac
There is a user accessible memory slot. You can install a maximum of 2GBs. The memory of the plant is pre-installed.
-
IPhone 6 - How will I know what apps are underway in the background?
IPhone 6 - How will I know what apps are underway in the background?
On multitasking on your iPhone, iPad and iPod touch - Apple Support
Scroll to the bottom where he treats background App update!
You can visit these settings under settings > general > background App update.
-
Question
How do I know what version (update / output level) version 6 has been applied to my system? I applied several different publication levels to version 6 of FF, but all about feature tells me is Version 6.0. No version! This seems to be a change in the updates in the way which are managed. What is a distortion because of the speed in which you push updates and what's new?
contact me if you need something moree-mail address removed
For those who are in need of a photo/screenshot, see attachment below. Right click on the image below, choose "Open in New Tab", click on the image to open in the new tab to zoom in and enlarge the image.
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
-
Should I delete the programs of 2004? How can you know what is safe to delete?
Original title: remove programs
I think I have a virus. I see on my computer a few applications with and installed as of 2004. The computer was purchased in 2007. When I run it in safe mode, it works fine and all applications have a date of 2007 or newer. Should I delete the programs of 2004? How can you know what is safe to delete?
Hello
This is not an indication of malware. Could be those are placed on the
computer by the manufacturer of the system and that was the date that firstly, they prepared their
for massive installation, or if they did not set a date and be used arbitrarily.=============================================================
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
-
I have recivied an email indicating that I need to load a security update. He referenced MS10-046 "a vulnerability in the windows shell could allow remote access" is this necessary? and it refers to the sp2. Which leads to my next question how can I know what "SP" I have on my computer. Thanks for your time and considerartion.
go to start > run > type
winver
Click ok
What service pack t - he say that contains?
-
How do I know what software is causing the error to Windows Installer: lack of program
original title: How do I know what software is causing the error to Windows Installer
Windows XP
When you get this message that keeps popping up every two hours-
The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded
may be missing or the upgrade patch may update a different bersion of the program. Make sure that the program
to be upgraded exists on your computer and that you have the good patch upgrade. ."
How do find you the application or software, or the program is causing the problem. ?
It is a simple solution.
Go in run, type: msiexec /Unregister 'press the ok button.
Back to run, enter: msiexec/regserver "press ok.
Youre thru. Restart the pc
-
I have a 2002 Home edition WIndows Xp System. How will I know what bit is?
How will I know what bit is?
Because they do not have a 64-bit edition family... you have a 32-bit operating system.
To see for yourself, make a right click workstation-> properties, on the general tab, you will see under "system":
Microsoft Windows XP
Home Edition
Version 2002
Service Pack 3For a 64-bit version "Windows XP Professional x 64 Edition" appears under System.
-
How do I know what motherboard is installed
I have a HP h8 - 1070t. How do I know what motherboard is installed?
Should I update my BIOS I install more memory?
Hello:
Here is the link to the product for your model specifications page.
http://support.HP.com/us-en/document/c02837359
It bears the name of HP IPISB-CH2 Pegatron: motherboard of Chicago.
Motherboard info is below to...
http://support.HP.com/us-en/document/c02854392
You should not have to update the BIOS in order to install more memory.
-
How to do in safe mode? What F key to use when starting to get in safe mode?
need to know what F key makes me when starting in safe mode?
Start typing F8 when you turn on.
The options that are available to you, should be similar to the following:
-Safe Mode
-Safe Mode with networking
-Safe mode with command prompt
-Enable Boot logging
-Activate the video resolution (640 x 480)
-Last good known Configuration
-Directory Services Restore Mode
-Debug mode
-Disable automatic restart in the event of system failure
-Disable driver Signature enforcement
-Start Windows normally
Maybe you are looking for
-
control keyboard to scroll through the window of the observer?
I use the current version of mail.app (9.3) in OS X 10.11.5 (El Capitan). I would like to be able to do basic operations of reading email with the keyboard controls. There are keyboard shortcuts to create new messages, reply to or delete messages,
-
I installed my OS to El Capitan and now my i7 fan (end 2012) Mac Mini runs constantly. Even during sleep. This never happened with Yosemite, so there must be something specific to the operating system of El Capitan. I checked my process in activity m
-
Qosmio G35-AV600: blue screen during the installation of Vista?
Hello I have a G35-AV600 one I am trying to install windows vista.I followed all the instructions for the driver raid and all with pure install. But my problem is that, after the first reboot, I get a blue screen with an error message. I know that so
-
HD2300 Webcam &; Win 8.1
Since the upgrade to 8.1 Win my HD 2300 webcam no longer works. The HP site and the camera box came the two compatibility to win 8 State but obviously win 8.1 did not exist at the point of tht in time. I have 40 years of experience and have tried all
-
How can I get a replacement for the dvd 6.1.7600.16385 driver
HP60-531NR laptop, Windows 7 64 bit computer Norton 360 necessary uninstall before installing new ones have damaged this driver Thank you