How do I reverse Split 1-d Array of recombining the splitting table?

Similar Questions

• How can I manipulate a 2D led array so that the LEDs light up in different ways?

  Hello everyone. I hope someone can help me.

  I have an array of leds of dimension 2d 4 x 4. I want that the leds light up in two different ways.

  One, I want the leds light upward from left to right. In the following order:

  0.0 0.1 0.2 0.3

  1.3-2.3 3.3

  3.2 3.1 3.0

  2.0 1.0 1.2 1.1 2.2 and 2.1

  So in the end the entire table turns.

  

  The other, I want the leds light upwards from right to left. In the following order of the order:

  0.3 0.2 0.1 0.0

  1.0 2.0 3.0

  3.1 3.2 3.3 1.3-2.3

  1.1 1.2 2.1 and 2.2

  So in the end the entire table turns.

  

  Any help will be appreciated.

  
  

• Array.Shift () sets the target table AND any referenced by table

  I have a class that creates an array from a xml configuration file.  I put a variable private in this class and that you use a getter in other classes to access the table.

  the routine that uses the table does the following:

  -call the getter and assign the value returned to a local variable tmpArray (private).  the Get accessor is a simple return() by using a value that is created in the constructor.

  -use a loop for itterate on content

  -use array.shift () to the element pop tmpArray

  the next time I run the routine, the content of the table is empty.  I use the getter similarly.  I've implemented the getter when I tried to manage the two tables in the same class, thinking that as long as the original array has been private (I also tried static), that wouldn't change the value.  I have since got around the problem by movine routine that fills the original value of the manufacturer, to the Get accessor.

  then, consider the following code:

  import flash.events.Event;

  btn.addEventListener ("click", btnHandler);

  var monTableau = new Array();

  var myTmpArray = new Array()

  MonTableau is ['one', 'two', 'three'];.

  myTmpArray = myArray;

  function btnHandler(evt:Event)

  {

  for (var i in myTmpArray)

  {

  trace ("myTmpArray.length:" + myTmpArray.length);

  trace ("myArray.length:" + myArray.length);

  myTmpArray.shift ();

  trace ("myTmpArray.length:" + myTmpArray.length);

  trace ("myArray.length:" + myArray.length);

  }

  }

  This returns:

  myTmpArray.length: 3

  myArray.length: 3

  myTmpArray.length: 2

  myArray.length: 2

  myTmpArray.length: 2

  myArray.length: 2

  myTmpArray.length: 1

  myArray.length: 1

  If I create a variable myVar and set it to 1 then set myOtherVar = myVar equal both the same value

  If I change the value of myOtherVar, myVar is not affected.

  but using the shift() method changes the original and the copied table.

  myTempArray IS NOT a copy of myArray but REFERENCE to is - shift() so affect them both.

• How to divide a string into an array of strings in separate tables

  Greetings,

  I have an array of strings which displays strings in a text file. I read each line of the text file and put it in an element of the matrix of the chain.

  Now, I'm trying to divide each string for each part of the chain, then put in a separate table. Each element in the chain is separated by a comma. I hit a brick wall at this point and would like to help please?

  The purpose of this is so that I have 4 tables that will be ready their item values and set variables based on these values until I went through all the elements in each array.

  Attached example.

  Also my VI is attached.

  Thanks in advance for your help.

  Then just use Index Array on 2D array provided.

  

• How do a continuous line when it is absent from the data table?

  I have a graph all the traces, but since there are blank cells on the table there are broken lines. I just need to know how to make them continuous.

  This discussion should be under the numbers instead of MacBook Air?  If so, remove needless zero data points or extrapolation can estimate points which are currently zero, as appropriate.  If zero points are valid results, consider changing a scatter chart.

• How sting/view images in memory without having to build the massive tables?

  I wrote a program that will capture up to 100 images, total of 500 MB.  I queue to each image (table 1 d of 12 bit) in a table of queues.  I would like to 'see' queues selectively capture data (but not destroy each queue) and display this data as a large stitched image.

  I was able to do this by building a table of each queue and manipulate rows/columns until the images are stitched in my model.  Does that create an another 500MB of memory lost since I 'copy' the queue data in another table?

  Also, is there an easier way to do this?

  Hey dre99gsx,

  IV wrote an example that seems to be the most progressive option in the construction of a large image to present its restriction to the use of grayscale (U8) and only built a training table 1 d.

  It is a requirement that you can access the separate images after that that they were sewn.

  Hope this helps

  Philippe

• How to reverse the 2d table

  Hello

  I have a chart 2d with this format.

  1 2 3

  4 5 6

  7 8 9

  I want to partition reverce

  1 2 3

  4 5 6

  7 8 9

  without using a loop, it is possible.using labview8.2

  Let's say that LabVIEW integrates a function to do it for you.  The underlying logic will use a loop.  Why?  Because it's a rather strange restriction put in place to prevent loops when you want to make an option that requires several almost identical iterations.

  Why are you trying to avoid using loops?

  Let's take a look at the code that can do what you ask.  Then we'll take a better look at it, and why we want to return to the question in bold?

  

  This will take your picture, splitting one line at a time, use the table 1 d inverse function (which will run an inner loop) on each line, build the lines in the 2D table and the output result.

  Now, what happens if you want to add a fourth row of this table 2D?  You must descend again to the same logic, wiring in the line concerned, extend the table construction, etc.  This could be something, you can manage.  But what happens if you want to extend it to a table with 100 rows?  Now, the work happens to be a little more and the code becomes essentially impossible to read.  You don't get any value here avoiding the loop.

  Let's take it a bit further.  What happens if you want to work with arrays of variable size?  Now, what will you do?  Your code is designed to work with a table size (and rather awkward doing).

  So we go back to the same question that we had this time together.  Why, exactly, you try to avoid loops?  Doing this without a loop is bad programming.  Don't limit yourself to bad practices to solve something that can easily be manipulated in a loop.  Write the code you maintain, scale and read.  If the loops are the best option, use them.  You're basically saying ' how can I use this screw if I don't want to use a screwdriver?  Of course, you can nail the it.  But stop being stupid.  Use the tool to the job.

• How to add corresponding elements of two arrays in a continuous acquisition?

  Hi all

  I am writing a program (in version 9.0 of labview) to acquire the signal of a fast set. I use the acquisition rate of 1.25 Ms with an external trigger. Now what I need, is to add the "n" data these acqisitions and then further process.  E.g. If I signal to 200µs acqiring can total number of data points with the acquisition of 1.25Ms rate will be 250. I'll get a table 1 d of 250 data points whenever I run my acquisition.

  Let's say Array 1of acquisition number 1, 0.1, 0.3, 0.5, 0.6,... up to a total of 250 data points

  Table 2 of the acquisition by number 2, 0.4, 0.5, 0.8, 0.4,... up to a total of 250 data points

  ----------------------------------------------------------------------------------

  Added table should be 0.5, 0.8, 1.0, 1.3... .route to a total of 250 data points

  -----------------------------------------------------------------------------------

  To do this, I need first to save the table of acqisition number 1, then run the No. 2 acquisition and add points of data corresponding to the saved table. This should continue at a nuber defined by the user to purchase say 10, 20 or 50... I don't know how to do it. Can someone help me with this problem?

  Thank you very much in advance

  Kind regards

  Champion

  I guess that time avarages and acquisition will not change during the measurement, so keep a cela outside loops. If you know your settings for made her make it constant.

  you create task (outside the loop) and a narrow at the end.

  Avoid the dashboard generation where possible. With no.. AV., and no. acq.points declared, the size of the arrays is fixed and you can (re) use a single Bay and replace the elements in the array.

  No need to collect all the data and avarage them after the rally. Just add

  I add a suggestion

• How to add listbox form in string array objects

  Hello

  I need help related to listbox

  1. currently, I am able to select and implement string in array

  Prob is

  ex.

  When I select the point 1 and 1 point will be created on arrayString but when I select article 2 and article 3 then arrary string poster article 2 and article 3 and article 1 is deleted.

  So please let me know how to add, add and delet listbox to string in array.

  2. how popup listbox and allow the user to add, delet or add the items in the listbox control and the transfer to the string table

  I have my code atatched. Please help me.

  Thank you

  Clement

  Sorry, try this:

• I have somehow blocked a contact by mistake. How can I reverse that?

  I have somehow blocked a contact by mistake.  How can I reverse that?  Make sure not to be too technical.  I am in my seventies and not fully computer.  Thank you

  Be just cause, you are in your 70s is no excuse the age card game.

  You did not bother to tell what mail program you use. It was said that in messages before.

• The file names changed in wingding type of letters. How do I reverse this order to access file information?

  I was copying some files to my flash drive and when finished I clicked on the button to remove it safely. A msg came up saying that I had to try it later and when I did, I did. When I put my disc on later to view some of my other files, I saw that many of my files are now empty and have file names that resembled letters of wingdings. How to I reverse this so that I can reuse my files?

  Hi LTLDREAMER1025,
   
  Analyze the flash player. Your description indicates that your drive has been infected by the virus or malware.
   
  You can use the Scanner from Microsoft to do the same.
   
  Visit the following link for the scan:
   
  Microsoft safety scanner

• My cat stepped on my laptop keyboard and the screen changed. How can I reverse this?

  My cat stepped on my laptop keyboard and the screen changed. How can I reverse this?

  Press Ctrl & Alt keys and use the arrows to rotate back.
   
  
  According to the graphics card on your computer, these can be alternatives.
   
  
  Right click on the desktop | Graphics options | Rotation.
   
  
  Right click on the desktop | Screen resolution | Orientation.
   
   
   
  
   

• How can I reverse sync, that is, using a fuse of Sanza + for Windows Media Player

  Somehow, I deleted a few music Windows Media Player.  The music is still on my Sanza fuse +.  How can I reverse sync and back music in Windows Media Player?

  Use Windows Explorer to copy the songs you want. It may be possible.

  Oh and RTM
  See you soon,.
  Jerry

• PP - How can I disable "split view" when moving clips on the timeline?

  In Premiere Pro, whenever I have move some clips, this split view appears and for some reason that it makes my computer stall for 2 minutes each time. Imagine how long it takes to make a video then!
  The program does not crash, the only thing I can't do when it stalls is to get a preview of the video (reading timeline)

  Nothing happens when I press play, up to 2 minutes later.

  

  Many times this error pops up when it starts to work again:

  

  Maybe disable split view will fix it, or maybe there's a more legitimate solution?

  To turn off this display, disable the Composite preview at Trim

  

  MtD

• in the mediaDevices.getUserMedia to never leave, how do I reverse this order?

  Hey im kind again for the mediaDevices API, the Mozilla Fierfox browser and in trials, I pressed on never let on the popup for permission to use my camara/audio devices, how do I reverse this choice?

  I think that you he rejected only for this Web site. Do you remember which site it was? To cancel this decision, return to this site and view the permissions of the Page Info dialog Panel by using one of these:

  • Right click on a box empty page and select View Page Info > permissions
  • (menu bar) Menu Tools > Page Info > permissions
  • Click on the padlock, or 'i' icon to the left of the address of the site, then the ">" icon, then more Information > permissions

  Scroll down to "Use of the camera" and again check the box 'Use default' or select a specific authorization. Ditto for "use of the Microphone.

  There is no Save button, your changes are saved as you go, so when you're done, you can close the Page Info dialog box.

  Does it work?