How do you get except the password?

Similar Questions

• When you buy a used computer how do you get around the user so password down, you can load your commands on the computer

  When you buy a used computer how can you getaround left password buy the former owner, so you can to the low load you information

  Hello

  I'm sorry, but the strategy of microsoft in these forums, is that without assistance will be given about the lost, unknown or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  ______________________________________________________________

  and when you buy a second hand computer, because you never know what it contains or is used since, the best policy is to reinstall the operating system

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• WHEN you reload the web page? & HOW do you get all THE bookmarks to appear?

  Your advice on how to reload online don't work; I can't find any Options on the Firefox menu on one of our Macs. I thought that he used to be in the low pop in the Menu, such as Safari.
  HOW can I get ALL bookmarks in Safari to also import into Firefox and appear as they did before the Mavericks? I see a lot of cases but none has everything, but the recent bookmarks.
  I have an iMac 21.5 and running 10.9.2 and Firefox 27.0.1 and Comcast

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• How do you get around the use of the introductory cartridges when installing?

  I got a co-worker that has never been used or installed a printer.  I changed the cartridges, and now I'm trying to install it I can't past the "wrong cartridge" message on the screen.  How can I get around that to install the printer.  It is a photosmart C7280 printer.

  I don't think you can.  The 'starter' cartridges are partially designed to regionalize the printer (THE USA or Japan, etc.)

  I think that if you call HP (1-800-HP INVENT), they can reset that, but I'm not 100% sure on that

• How can you get pass "Enter password" when you don't know what it is?

  I inherited a Toshiba laptop which has Windows Vista label. The model # begins with PSL, so I was able to determine that it is a Toshiba Satellite model L.

  When I turn on the computer, he asked a password I do not know, nor is it the person who gave me the computer. So, I placed my Windows Vista operating drive in the drive and restarted the computer hoping to reformat the system. But it circumvents the drive and it comes back asking for the password. Can someone help me?

  I assume that you are writing about BIOS password. This password can be removed by Toshiba service only.
  Contact nearest authorized maker Toshiba and allow them to remove this password for you.

  When the password is removed, you will be able to install the operating system and have full access to all the parameters of the laptop.

• How do you get into the BIOS of 10 Latitude - Dell support instructions are bad

  The Manual:

  My problem with these instructions:

  1. There is no blue logo, it is black

  2 external USB keyboard connected to the table not recognized at all

  3 external USB keyboard connected to the docking station recognized after only 8 Win rises

  4 virtual keyboard not available until after that Windows 8 rises

  It seems that these may need to be revisited...

  DRM for suggestions

  D

  Hi Rick D,

  Try the following steps to get into the Setup/BIOS system:

  • Turning off the tablet.
  • Unplug the Tablet from the docking station.
  • Press the Power button to turn on the system.
  • Until the Dell Logo appears, immediately, press and hold the Volume button down until it displays the system configuration screen.

  I hope this helps. Do not respond if you have any other questions.

• How do you get all the files visible and shareable for the creative team of Cloud?

  Hi all

  My design team small recently signed for the composition of the creative team of cloud. It comes with 100 GB of storage space. As my team is scattered about the geography (two in the United States, one in Australia), we hoped to use this storage space as a way to share files more easily and control version on the joint projects.

  Searching through the help, it seems, however, that you have to select each file individually to share, and then type in an e-mail link. That could become very heavy when downloading multiple files.

  I think that, as a team setting, there is a way to define a default value for sharing on all or some members of the team so that each person can access the files without have to choose each one individually.

  Is this possible? I have the lack somewhere?

  Thank you!

  Currently, it is not possible using the CC file sharing mechanism. You must select the files individually and share them.

• How do you get back the small line that allows you to match the clips perfectly?

  Don't know how to explain it properly, but that the little line that appears when you move a clip so that you can match it up without overlap next to him?

  I managed to get rid of it and I have literally no idea how or how to go back, really need help because it's so difficult to match clips without her, they overlap or have a black screen between the two! I'm using Premiere Pro CS6.

  Any help would be great, thanks

  It took me a while to understand what it was that you were missing.

  Hit the S for snap (magnet).

• PDF possessing blocks to fill in dates, how do you get in the next box?

  I have a pdf form that has separate blocks to enter the date. How do the next block?  I can type in the first, but it won't let me tab or click on the next block.

  The field type you describe is called a "Comb" field Prior to version 6, there was no option for the field that could take the entire string of data at once and then display them with each character in a box.

  Have you tried to enter the entire field data as a single string?

  Would it be possible that the designer does not properly create the form field.

  Can you provide a link to a sample of the form you are trying to fill?

• How do you get all the tools out of sight guided PSE14 tab?

  The new view on the tab tour can be modified to be able to see the picture that must be changed with one of the other two tabs going first?  View default tour tab is filled with what seems like a tutorial page. The tab page view guided much is a source of distraction and slows down the work.  Yes, som of the guided tools are more efficient to use than the Expert tool selections, so I end up with about the same amount of time.  Now, it is very heavy.

  I'm not a psychic. I generally would like to see the image that I will edit the first and then select the tool to use.  The new view on the 'Guided' tab shows all the tools that you can use to change the photo.  But the picture is not displayed.  I'm not good to choose the tool first, before I see the picture.  I'm not inclined to look at the photo on the Quick tab, or on the Expert tab first and then go to the guided tab and choose a tool.

  Thank you

  Hetz3 wrote:

  The new view on the tab tour can be modified to be able to see the picture that must be changed with one of the other two tabs going first?  View default tour tab is filled with what seems like a tutorial page. The tab page view guided much is a source of distraction and slows down the work.  Yes, som of the guided tools are more efficient to use than the Expert tool selections, so I end up with about the same amount of time.  Now, it is very heavy.

  I'm not a psychic. I generally would like to see the image that I will edit the first and then select the tool to use.  The new view on the 'Guided' tab shows all the tools that you can use to change the photo.  But the picture is not displayed.  I'm not good to choose the tool first, before I see the picture.  I'm not inclined to look at the photo on the Quick tab, or on the Expert tab first and then go to the guided tab and choose a tool.

  Thank you

  Thinking that the first view of the new "guided" interface is simply a menu, not a Workspaceedition. Each photo is a menu item. You must choose your option before accessing your editing space. It is the now universal way of selection in tablets and smartphones, you may not like it (I didn't) but that won't slow down your workflow.

• How are you going to the main menu while watching a dvd

  While watching a dvd how do you get to the main menu?

  In Media Center, right-click and select controls then menu options to go to the DVD menu.

• When you try to insert a digital signature, it does not accept the password, I just reset.  How can I get include the signature?

  When you try to insert a digital signature, it does not accept the password I just reset for Adobe and will not let me. How can I determine what the password, it's who will give me access to insert the signature?

  Hello

  What is the error you get after inserting the password. Although there is no way to recover the password.

  You can simply create a new digital ID with a new password.

  Concerning

  Sukrit diallo

• Lost password administrator somehow. Tried to reinstall Windows XP with the CD without success. Want to know how to get around the password requirement.

  Cannot start; or work from the recovery console because of the lack of administrator password.  There were periodic crashes which led me to try reinstalling XP.  Now I'm stuck when I get to the password requirement in the Recovery Console.  As you can tell, I'm not computer literate, but can follow written instructions on how to recover from this.  Also, would like to know how to recover my files and programs if they are not lost; or how to determine if they are.

  gchtm5,
  Thanks for posting with us.  If you no longer have the administrator password you can perform a parallel installation so that your data will not be lost.  However, you will need to reinstall your programs.  This link covers the different installation options.
  http://support.Microsoft.com/kb/316941

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Smartphones how do you get the keyboard of the storm to lock on Holster?

  I was able to do it on my first storm, but I went back to that one.  How do you get the keyboard of the storm to lock when placed in the Holster?  Thanks for your help

  rbattista wrote:
  I was able to do it on my first storm, but I went back to that one.  How do you get the keyboard of the storm to lock when placed in the Holster?  Thanks for your help

  Locking on Holstering

  1. in the terminal options, click password.
  2. change the Lock Pocket Holster Yes
  3. press the Menu key.
  4. click on save.

  Jamie

• How do you get the header of HTTP authentication for our hosted solution?

  How do you get the header of our hosted solution (adobeconnect_admin_httpauth) HTTP authentication? The documentation says find a custom.ini file but I have no idea how access.

  I need to provide only the plugin adobeconnect used with a Moodle instance, screnshot below.

  

  If it helps, when I click "Test connection", I see the following output.

  A series of tests were run to determine if the Adobe Connect Pro Server has been properly configured for this integration to work and also determine if the user credentials provided in the global settings activity has the appropriate permissions to perform the necessary tasks required by the activity module. If none of the tests below have failed, this activity module will not work correctly.

  To get help and documentation in how to configure your Adobe Connect Pro Server, please see the help page of MoodleDocs for this activity module help page

  Sending call common-info:

  has managed to get the session key: na11breezrirhb4f4ryf5shqy

  connected as user admin

  Test retrevial of shared content, registration, and records of the meeting:

  Error getting the shared content folder

  XML request:

  <? XML version = "1.0" encoding = "UTF-8"? > < params > < param name = 'action' > sco-shortcuts < / param > < / params >

  XML response:

  <? XML version = "1.0" encoding = "utf-8"? > < results > < status code = "lack of access" subcode = "no-login" / > < / results >

  getting error forced archives folder (meeting records)

  XML request:

  <? XML version = "1.0" encoding = "UTF-8"? > < params > < param name = 'action' > sco-shortcuts < / param > < / params >

  XML response:

  <? XML version = "1.0" encoding = "utf-8"? > < results > < status code = "lack of access" subcode = "no-login" / > < / results >

  record of meetings to get error

  XML request:

  <? XML version = "1.0" encoding = "UTF-8"? > < params > < param name = 'action' > sco-shortcuts < / param > < / params >

  XML response:

  <? XML version = "1.0" encoding = "utf-8"? > < results > < status code = "lack of access" subcode = "no-login" / > < / results >

  meeting testmeetingtest file creation error

  XML request:

  <? XML version = "1.0" = "UTF-8 encoding"? > < params > < param name = 'action' > sco-update < / param > < param name = ' type' > meeting < / param > < param name = "name" > testmeetingtest < / param > < param name = 'folder-id' / > < param name = "date-begin" > 2015-03-14T 06: + 00:00 53:39.000 < / param > < param name = 'date-end' > 2015-03-14 T 07: + 00:00 53:39.000 < / param > < / params >

  XML response:

  <? XML version = "1.0" encoding = "utf-8"? > < results > < = "invalid" status code > < invalid field = 'folder-id' type = subcode 'id' = 'format' / > < / status > < / results >

  Error creating user testusertest

  XML request:

  <? xml version = "1.0" = 'UTF-8' encoding? > < params > < param name = 'action' > principal-update < / param > < param name = "name" > testusertest < / param > < param name = "name" > testusertest < / param > < param name = "login" > [email protected] < / param > < param name = "password" > 9B396EA828A00203FB3E8E69010FE537 < / param > < param name = "extlogin" > [email protected] < / param > < param name = ' type' > user < / param > < param name = "send email" > false < / param > < param name = "a-kids" > 0 < / param > < param name = "email" > [email protected] < / param > < / params >

  XML response:

  <? XML version = "1.0" encoding = "utf-8"? > < results > < status code = "lack of access" subcode = "no-login" / > < / results >

  What do we lack?

  Thank you!

  Here's the docuementation for loging in there with a Headder HTTP Adobe Connect 9 * log from an application

  Because there may be some changes to the files on the server, you may need to work with Adobe's Support to see if they can be changed in the hosted environment. Acrobat Connect Pro help | Acrobat Connect Pro Support