How do you get VISTA home premium install on hard drive replacement

Similar Questions

• Local tech installed Windows Vista Home Premium after a hard drive failure. However, my key is Windows Basic. Is the copy, he put on my system illegal?

  Genuine Windows clean install

  Hello

  I had a problem with my laptop Acer Extensa 5230th. It was not started and so I took for Matech computers.  They diagnosed as having a mechanical drive problem.  So they replaced the drive and installed a more recent version of windows vista on.  Note: I haven't bought a new copy of vista family premium, he said he was going to reinstall vista.  It had windows Vista Home Basic, it has installed vista Home premium and said that he had validated by call from windows, but I'm suspicious because I don't think you can use a base of windows key to validate Home premium!  It means that he has put on an illegal version on windows or used the genuine key that came with the laptop.

  In addition, on computers of brands, if this happens again, how is a technician for legally to reinstall the original windows that it came with the new hard drive? How to install windows vista basic on the new hard drive by using the original key to make it genuine? What windows installation disc would you require? or is it easier to just buy a new copy of windows?  I heard that many technicians, prefer to install illegal versions of cracking of windows instead of the customer to buy the new installation of windows.

  Kind regards

  Lewis

  Here are some utilities which displays product key Vista Matech used to activate Windows:

  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.
  However may not detect a key to office, then try one of the other two below)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html

  Please do not post your key on this forum, rather checking to see if it matches the key on your laptop, I(Correction: "if it isn't') it will fall sooner or later"Non-genuine"that your key was for another version of Vista so what was installed.

  J W Stuart: http://www.pagestart.com

• How can I get Vista Home Premium 64 SP2 to Windows 8 without installing Windows 7, first?

  Advisor to upgrade Windows 8 indicates that the HP updates are available. When you go on these pages updates are only for Windows 7.  Is it possible to go without first purchase Windows 7 to Windows 8?

  Windows 8 is still a pre-release version of the software.  Please use the forum Windows 8 Preview Release

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install?page=1&tab=no

  for questions regarding the migration to Windows 8.  Microsoft has not announced the final upgrade matrix for Windows 8, but extracts did not support the upgrade of Vista without having to reinstall your programs.  Microsoft has announced also not if there will be upgrade for Windows 8 licenses either.  You must ask in the forums of Windows 8.

• I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit). Unable to get a backup to a flash drive. Error: 0 x 81000029

  Original title: I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit).  Unable to get a backup to a flash drive.

  After back back, very many updates of windows, my computer is full of problems and it is not representative of the restore points far enough back to correct.  I want really to save my data and programs for flash drive (s) and then go for a full recovery of the system (return to factory).  When you try to do the backup on a 4 GB USB key I get an error including 0 x 81000029.  I have seen posted answers to this.  Everything is included to aid Vista disk from the window which was not included when I bought my computer. Any help would be appreciated.

  Hello

  The following article should be useful. To use system recovery options, you have Vista installation disc. OEM (Original Equipment Manufacturer) repeatedly will install on the computer Windows recovery environment. To cross check if it is installed, try the following steps.

  1 start the computer and press the F8 key continuously to get advanced boot menu options.
  2. on the menu advanced startup options, check if the Startup Repair tool is in the list.
  3. If so, select it and press ENTER.
  4. If not, then you should organize a Vista installation disc.

  You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer
  http://support.Microsoft.com/kb/950167

• Can someone give me instructions on how to reinstall Windows Vista Home Premium?

  Re-install Vista Home Premium

  Microsoft gave me this web address, they said you could provide me w/step by step instructions on how to reinstall my Vista Home Premium... looks like my windows crashes once AGAIN...

  Hello

  There are several methods to reinstall Vista.

  This can help you (download files and make your own DVDs).

  Vista ultimate is available. Read the information in the lower part of the message on how to use it for other editions of Vista:

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can borrow and use a DVD Vista Microsoft (selling retail or OEM System Builders License), which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  The COA sticker is either or in the battery compartment on the underside of the laptop.

  With a desktop computer, it's on the side, the back or the top of the computer case.

  

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as well as 32-bit and 64-bit editions different DVD lights.

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Can I make backup and system restore, my PC has Windows Vista Home Premium installed.

  I have Windows Vista Home premium installed, but it won't back up my files and I can't use the system & restore for some reason any.

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  _______________________________________________________________________________

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• I have a laptop with Vista Home Premium installed. My plan is to install Win 7 and then move on to Win 10.

  Original title: Vista to Win 7 to win 10

  I have a laptop with Vista Home Premium installed.  My plan is to install Win 7 and then move on to Win 10.  I have a new full version of Windows 7 Pro SP1 with an activation key.  I have experience update to Win 10 of Win 7, but worry about the installation of Win 7 over Vista.  I guess I have to do a clean install.  There is no problem to meet the minimum requirements of 10.  Can someone give me some advice on the start-up of the conversion of Win 7?  Just insert the disk?  Everything has been backed up and it's ready to go!  Thank you.

  Since the family migration to Windows Vista Premium to Windows 7 Professional it will install a clean place, why not simply use your Windows 7 Professional product key to perform a custom Windows 10 Pro install from the go?

  I don't see the need to bother installing Windows 7 Professional.

  To learn more:

  How to download official Windows 10 ISO files

  then

  How to: perform a customized Windows installation

  To learn more:

  How to install and activate Windows 10 using your Windows 7 or Windows 8 product key

• I have been informed if you have Vista Home Premium windows will give you windows 7 ultimate for free. Is this true? And who should I contact to go forward with this place.

  I have been informed if you have Vista Home Premium windows will give you windows 7 ultimate for free. Is this true? And who should I contact to go forward with this place.

  Please see the bulletin: Windows 7 Upgrade Option Carey Frisch

• I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full.

  I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full. I don't understand how he got that way... but... I've never used windows to the top, however I do back up with my Norton Security.  I'm not a COMPUTER guru AT ALL and am very confused as to what must be saved for me to do a system restore.  I just made a backup on a 16 GB usb flash drive, which included photos, documents, email, contacts and music.  But what of my registry or my drivers I've updated on the latest updates of 2 years and windows?

  So in plain English for the layperson to the computer, lol, can someone tell me...

  1. where should I back up to? (windows, norton?)

  2. what should I back up? EXACTLY, please. lol (I have hundreds of games, I don't want to back to the top if possible)

  3 and... HOW MUCH ALCOHOL SHOULD I HAVE AVAILABLE WHILE TRYING THIS. LOL just kidding. Laughing out loud

  Hello

  Updates must be installed in a certain order and no Service Pack must be installed unless and until it is offered through Windows Update.

  However, try these options:

  Step 1: You can not reuse what already automatically downloaded and installed. You can however save updates and install them manually if you wish.

  Step 2: You can create a system image on the computer. A system image is an exact copy of a disc. By default, a system image includes the drives required for Windows to run. In addition, it includes Windows and your system settings, programs and files. You can use a system image to restore the contents of your computer if your hard drive or computer ever stops working.

  See:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Also, you can see the following link for more information about Windows backup:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

• How can I get Windows 7 to read RAW hard drives without having to format the hard drive due to important work on this subject?

  Original title: the file format of external hard drive is the RAW and not NTFS. How can I get Windows 7 to read RAW hard drives without having to format the hard drive due to important work on this subject?

  I put the hard drive on an XP and Vista machine and can read the hard drive, but not with Windows 7

  Hi Zling,

  It works on other OS? When did you finally read the disc and with what OS? If you can read the drive and make a backup of the data on this subject, I you suggest to backup the data on the drive and then put it in using the NTFS file system.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to get Vista Home Premium recovery media?

  I need to know if theres any websites to download the relocation of the disk for vista home premiumif anyone nows could you let me know please.
  

  No.; It does not exist.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• How to download printer driver Canon Pixma MP240 on a disk with Vista Home Premium installed on the old PC with XP Home not connected to the internet, THE WAY EASY, PLEASE

  I have an old PC running Windows XP Home on the internet, has lost the MP240 printer driver. You want to download the drivers for it on my Vista Home Premium to install in the old PC. I can't get the internet to work with the old PC, or I want to download the drivers directly here. I found a few options for pilots with the Vista computer, but they all want allows you to download the diagnostic and I won't be using this printer on my Vista computer, so I don't want to do it this way. Any place that I can just download the DRIVER ONLY and put it on a disk to load in the old PC. Help, please

  I think you'll find a driver here: http://software.canon-europe.com/products/0010645.asp

  English version: http://software.canon-europe.com/software/0035873.asp?model=

• How to determine what Vista Home Premium has been installed

  Several years ago, I bought two copies of Vista Home Premium operating system.  I used on a desktop computer and the other left in the drawer.  Unfortunately, I was not which of the two copies that I used.  Now, I would use the second copy.  Y at - it a simple way to determine what copy, I have already installed and that is the unused copy?

  Hello HowardTeten,

  There's a freeware app called Magic Jelly Bean http://www.magicaljellybean.com/keyfinder/ it is a keyfinder. Download and run that and it will tell you which product key you use. All you need to do is then check to the back of the case of Windows to see which matches.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How to: fix Windows Vista Home Premium SP2

  I don't have a CD or DVD containing the operating system I use now. I DO NOT WANT TO REINSTALL or RECOVER the operating system.  I would lose a lot of valuable information.

  I would be sincerely grateful to find a 'repair' for this operating system. Microsoft offers a service to REPAIR an existing installation of Vista Home Premium?

  Jeff

  Hello

  Microsoft does not include disks for OEM preinstalled computers, Acer, HP, brands etc.

  a repair install is performed from a vista operating system

  you will need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  and note the part about uninstalling Service Packs, if necessary

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  And if you need to do a startup repair and that you do not have a Vista DVD from Microsoft, read this:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If you ever reinstall Vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I reinstall Vista Home Premium?

  I want to reinstall Vista Home premium in my lobtop. Help me please

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner