How do you pair surface with an hp printer

Similar Questions

• How do I pair iwatch with two phones? I have updated to 3.0

  How do I pair iwatch with two phones? I have updated to 3.0

  Hello

  More than one Apple Watch can be coupled to a single iPhone, but a single Apple Watch cannot be combined with more than an iPhone at some point.

• How pc you can load with a product microsoft Office of

  How pc you can load with a product microsoft Office of

  I forgot to mention that there is a version of the Enterprise of Office what I know there is no physical limit, but I don't know there is commitment legal contract.  I have no idea of what it would cost, but I can't imagine that it's cheap!

• How do you create bookmarks with Designer ES3?

  Based on this link

  http://blogs.Adobe.com/LiveCycle/2012/03/whats-new-in-LiveCycle-ES3.html

  It is now possible to add bookmarks through LC for XFA forms.  How do you go thru Designer? or is not feasible through output?  This is very critical for us because of the WCAG 2.0 compliance.

  I found this specific blog for ES2 +.

  http://blogs.Adobe.com/foxes/2011/04/11/creating-bookmark-in-XFA-forms/

  where its been possible with the addition of the macro.  However other readings of the designer of macros and indicate that the things about blogging is not necessarily officially supported.

  John brinkman in link: http://blogs.adobe.com/formfeed/2010/01/designer_es2_macros.html

  By John Brinkman - 19:38 on January 25, 2010

  Ennis: Unfortunately, even if I knew the answer to the question whether the macros will be officially supported - I could not answer. Our policy for blogs is quite clear that we cannot give specific information about the future of the product. But I encourage you to make your request by whatever channels you have. In the version of prototype, I'm not aware of any restriction on the http requests made by the flash plugin. that is, it is not wired like where flash http requests go through the stack of flash in Acrobat Reader network. As far as I know, the designer does not have the equivalent of a network stack. John

  To return to my question.  How do you create bookmarks for xfa forms in ES3 Designer?

  I created bookmarks by modifying the xml source of the xfa documents. I have created bookmarks for subforms intensively using this method

  the following code snippet

  Eligibility

  0,0,0

  normal

  gotoPage

  In the above example, I a void form called "Eligibility" and have created a bookmark using the tag options

  Let me know if you have any problems using this method

• How do you return the status of the printer by default online - 2 positions are in prtqueue

  After a printer error (i.e. the low ink level) and I fixed the problem, windows still shows the printer offline. Even if there is prt work queued. The old days MVS one could vary a device online or offlne. How do you like in the world of microphones. It is frustrating.

  Hi, Brokeddog,

  Save your documents

  Click Start > type services.msc

  Scroll down and click on print spooler

  Select stop

  Wait for Windows to stop the spooler

  Services nearby

  Start > Control Panel

  Click the Printers folder

  Right-click on the printer icon

  Select open

  Click on file

  Select Cancel all Documents

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Click on Device Manager

  Click on the > next to Ieeee... full printer

  Right-click on the driver and select uninstall

  Click on the > next to imaging devices

  Right-click on the driver and select uninstall

  Click on the > next to printers

  Right-click on the driver and select uninstall

  Click on the > next to Bus Unversal controllers

  Right-click on the printer and select uninstall

  Close the Device Manager

  Restart the computer

  Windows will reinstall the drivers

  Access the site of the manufacturer of the printer and look for updates

  When Windows reloads, go to services.msc and start the print spooler

  Try printing again

• How can you fill ListBox with channel group name dynamically?

  I built a GUI in the 'View' pane that acts as a large table of contents. At the top of the GUI, there is a list box I want to dynamically fill with Group channel names loaded in my data portal (internal data). I can't generate the necessary code to do this. Currently, I use a ListBox control. Can I use an EnumListBox instead?

  The purpose of the list box should allow fast loading data which must be analysed in several sheets (also in the part of 'View') for comparison side by side rather than drag and drop data into each individual record.

  Any help would be appreciated,

  Thank you

  ~ Nathan

  Attached is a screenshot of the GUI I hope it helps.

  Hey Nathan--

  Have we met yet?  Don't think that I will remember to see you post on the forums of tiara so far (or remember you I meet someone named Nathan in person recently).  Welcome to the forums of tiara!

  There are a few things that you need to change about your code snippet-

  1. The reason why you get the error "object required: ' [string: 'filename']' is because the Set command expects that the right side of an expression returns an object (you define your variable to)."  In your case, you return a string (the name of a group), not an object.  Simply remove the Set command.
  
  
  2. The ListBox.Items.Add () method requires two parameters - the first is the text of the item to insert in the list, and the second is a value to assign to this point (you can do single).

  As a result, to more directly match your code snippet to the labour code, follow these steps:

  Dim listNum, names
  We = 1 to GroupCount
  Name = GroupName (listNum)
  Call selectData.Items.Add (names, we)
  NEXT

  Note that you can also use object programming oriented with the data object that represents the data portal, it is easier for you to avoid remembering variables such as GroupCount and GroupName DIAdem (that's me):

  Dim listNum
  
  We = 1 to Data.Root.ChannelGroups.Count
  
    Dial selectData.Items.Add (Data.Root.ChannelGroups (listNum). Name, we)
  
  NEXT

  Your project is looking great - let us know how we can continue to help and keep us updated!

• How do you share themes with all users?

  I have a few users using the same pc. I have a user profile that has downloaded Windows 7 additional topics, but when you go to control panel, desktop and customizations from another user, all new themes aren't there. I want to keep things clean and tidy and to minimize the disk space. Does take each user to download Windows 7 themes to their profile or can there be a central location for all users to choose what topics they want to apply and change? If yes how to make them accessible from the Control Panel, desktop and personalization option?

  http://Windows.Microsoft.com/en-us/Windows/downloads/personalize

  Hi Humble1,

  Download the .themepack file and open it with WinRar or 7-Zip. Extract the contents of a folder (accessible by all users)
  Open the theme file and update the paths to the resources accordingly. (By default, the desktop background and other parameters point to %UserProfile%)

  Save the theme file and place it in C:\Windows\Resources\Themes. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• How would you recreate this with Pathfinder?

  A few days ago I played with the Pathfinder and created this form. I rather like the look of it and I wanted to go back and make some adjustments, but I can't for the life of understand me what combination of options Pathfinder I used to achieve this. (NOTE: the Green object is a flat single unique object, it's the main thing I'm trying to recreate, only one path unified line.)

  

  Initially, I created the object by taking a rounded rectangle with a stroke and turning and copy around a central point, then adding a circle on top of everything. I've expanded the forms so I with separate paths for the race and the main rectangle shape. I remember using only a few clicks of Pathfinder, it wasn't the cleanest work because I had to use Simplify to remove a lot of redundant points, but it was pretty quick.

  

  Because of the way that all rectangles are superimposed on top of the other, no matter what I do I can't seem to replicate properly. Each end product ends up looking like this in one way or another. Only, I can't figure out what I did to get this unified Greenway that retains the appearance of rectangle in layers around the edges.

  

  Any of you have an idea on how I could do to recreate this object? Or curvilinear unifier of several forms of layers?

  Select all

  Object > expand appearance (If available)

  Object > expand

  Click Merge on the Pathfinder Panel.

  

  You are not absolutely "need cut art, however. You can easily set this up with a simple rectangle, the effect of the transformation and a circle. Except if you want to change things, otherwise leaving 'live' may have advantages. In fact, I developed the appearance to the image on the left above so that each rectangle was a separate path.

• Flex Mobile 4.6 this step text - how render you HTML text with it?

  I have a little cat component in a Flex Mobile application that I just upgraded to 4.6 SDK.  The chat component has a text box displaying messages, and they are HTML formatted by the following text:

  StyleableTextField (textArea) .htmlText += myHTMLText;

  He worked in the SDK 4.5 but StyleableTextField is not part of the new text introduced in SDK 4.6 stage framework.

  Question: How HTML format messages in my chat text box now?

  I think I have a solution for you (and me) while watching devgirl.org. It seems that you have not need to set the skinClass on your textArea in MXML (as suggested above). Setting the skinClass fixed my Android problem.

  In actionscript, import this class:

  Import spark.components.supportClasses.StyleableTextField;

  In actionscript, also add the following to your new text Manager:

  ta.appendText (newText);

  StyleableTextField (ta.textDisplay) .scrollV ++;

  I don't know exactly why, but this solution works fine on an iPad, but it doesn't work for me on a Tablet I test here. The TextArea component on the Android tablet is not scrolling unless it is developed. Maybe I made a mistake of deployment to the Android device, and I will check that. Fixed this by setting the skinClass on the component.

• How color you a shot with the pipette?

  Hi all.

  It's aggravating: I have a selected path and a contour pen is specified (black, 6 pt).  I want to change the line color using the Eyedropper to select a color also, so I select the stroke color in the toolbar, then select the eyedropper and click on the color I want.

  The stroke inexplicably disappears completely (pen stroke set to none), and the line width is eliminated.

  Look at what Adobe always competent assistance has to say about it:

  

  Incredible.  Anyone has any idea here?

  Thank you!

  P.S. what the hell with this image?  Click on it to see what it really looks like.

  Möbius Ribbon,

  At least 10, when you use the pipette like that, unless you click a shade or want to the weight of the race and possible Fill also copied, you will need to press Shift.

  There may be something wrong with preferences; You can try to move the folder or just press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easier but irreversible).

• I have been using aol. It allows you to open multiple windows. How do you do this with Firefox? b

  Basically, I want to acievethis without running multiple copies of Firefox.

  In the menu, select new tab-> new window. It will run two windows but that a single copy of Firefox. You can also use separate tabs by selecting new tab.

  I hope this helps.

• I how do you get help with an open box (Open box #0186559953) can't someone to answer.

  I have CS6.  Due to problems of iMAC HD, I had to wipe and reinstall everything.  Tried to get the residence to answer on why enforcement will not be down loaded, but no response.

  If you want to increase your chances of getting help in these forums (user to user forums), you must explain the details of your problem.  Only Adobe employees have the ability to access, so if you share your problem in detail you can have recourse to those of us who are not employees.

  Have you tried to download the CS6 software through one of the following pages...

  Download the CS6 products

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  http://prodesigntools.com/Adobe-CS6-direct-download-links.html

• How do you buy pen with ink and scale of slide in China?

  Today I see Adobe launched Creative Suite Design of cloud update recently, also announced a new mobile applications as well as two hardware products - namely sovereign digital slides and digital ink pen.

  I love this material, the products are very

  I want to know what means can buy

  If you know please tell me thank you very much

  Hi Tricia,

  From now it is available only in the US but we are working on that, and soon available outside the United States as well.

  Thanks and greetings

  Yannick Thomas

• How do you get a report to stop printing

  After each Word document to print a recap page prints too - regardless of the number of copies of a single document a summary for each page page print - if I print a document of several pages, a recap page print also.

  I use an Officejet Pro 8600 (N911g) - I use Microsoft Word 2008 for Mac - I'm running OS X 10.5.8

  How can I disable this "option"?

  I used a Canon MX320 before moving on to the HP printer and did not have this problem, so I don't think it's to be casued by Word.

  Hi Northwest4330,

  With summary page do you mean that a summary of information for your document is printed. If so, it's actually an option in Word. Open your print dialog box, and then select the word group. Here you will find a "Word Options... button ». Click on it and uncheck her "properties of the Document.

  If only a blank page is printed, make sure that you do not have a blank page in the end. You can also choose the PDF option - open a PDF in preview in the print dialog box. This shows you how the print will look like.

• How device you can run a USB 2 printer on usb port 3?

  I am running 7100 Lexmark printer / scanner which is a USB 2 WIN 7 on a usb port 3 WIN 8.  Printer throws several different including "error cartridge 1203" error messages and do not print.

  Any ideas.  Lexmark so far does not have a driver for the x 7170 with WIN 8 compatibility.

  I am running 7100 Lexmark printer / scanner which is a USB 2 WIN 7 on a usb port 3 WIN 8.  Printer throws several different including "error cartridge 1203" error messages and do not print.

  Any ideas.  Lexmark so far does not have a driver for the x 7170 with WIN 8 compatibility.

  Hello

  This looks like a driver compatibility problem.

  USB 3.0 ports are designed to be backward compatible with USB 2.0 devices. When you connect a USB 2.0 device to a USB 3.0 port, the unit will simply operate at USB 2.0 speed.

  Lexmark support - select a product:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If Windows 7 drivers are available, try installing the driver in Compatibility Mode.

  1. download the driver for the previous version and place it on your desktop.

  2. right click the driver installation file and select Properties / Compatibility tab.

  3. place a checkmark in run this program in compatibility mode for.

  4. in the drop-down menu, select Windows 7.

  5. click apply / OK.

  6. right click the Setup file and select run as administrator .

  Let us know the results.

  Concerning