How do you use the Sony NEX 5R as a webcam for live streaming?

Similar Questions

• How to set on the Sony NEX-6 automatic exposure bracketing

  How to set on the Sony NEX-6 automatic exposure bracketing

  Hi FotoEdge,

  You can adjust the automatic exposure of the support under Menu section. Instructions and information on this option is referred to in the #58 manual page.

• How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with the Sony Support, their online documentation and drivers (update or reinstall).
  and their forums.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How do you use the Exp fundtion on the windows calculator

  How do you use the Exp function in the windows for the following calculator

  Exponential of the negative power of 0.5

  e

  I don't have.
  I couldn't find an e = 2.71828183 key on the windows calculator.
  I used Google's built-in calculator function.

  The windows calculator, you will need to enter:
  2.71828183 [x ^ y] (-0.5) =.
  ||

• How do you use the creative cloud with using the internet.

  How do you use the creative cloud with using the internet.

  You MUST have an internet connection to download and activate the programs

  After this, you MUST have a connection to the programs check your subscription on the calendar below

  Cloud status check 30-or-99 days https://forums.adobe.com/thread/1549838

• How do you use the FileChooser.ExtensionFilter in JavaFX?

  Hello world
  
  How do you use the FileChooser.ExtensionFilter in JavaFX to set the file name extensions and filters of the extension?
  I'm sorry but there are no tutorials covering the "FileChooser" element in JavaFX, I know? Any advice or ideas
  will be greatly appreciated to direct me in the right direction.
  
  Many thanks in advance!

  import javafx.application.Application;
  import javafx.event.ActionEvent;
  import javafx.event.EventHandler;
  import javafx.scene.Group;
  import javafx.scene.Scene;
  import javafx.scene.control.Button;
  import javafx.stage.Stage;
  import javafx.collections.*;
  import javafx.stage.FileChooser.ExtensionFilter;
  import javafx.stage.*;
  import javafx.scene.*;
  import javafx.scene.layout.Pane;
  import java.io.*;
  
  /**
   *
   * @author Shakir
   */
  public class Filech extends Application {
  
      /**
       * @param args the command line arguments
       */
      public static void main(String[] args) {
          Application.launch(args);
      }
  
      @Override
      public void start(final Stage primaryStage) {
  
          primaryStage.setTitle("Hello World");
          final Group root = new Group();
          Scene scene = new Scene(root, 300, 250);
  
          Button btn = new Button();
          btn.setLayoutX(100);
          btn.setLayoutY(80);
          btn.setText("Get file chooser");
          btn.setOnAction(new EventHandler() {
  
              public void handle(ActionEvent event) {
                  FileChooser choose = new FileChooser();
                  File d = new File(getClass().getResource(".").getFile());
                  choose.setInitialDirectory(d);
                  Stage st2 = new Stage();
  
                  st2.initModality(Modality.APPLICATION_MODAL);
                  javafx.stage.FileChooser.ExtensionFilter filter = new FileChooser.ExtensionFilter("executable", "*.class");
                  st2.initOwner(primaryStage);
                  choose.getExtensionFilters().add(filter);
                  choose.showOpenDialog(st2);
  
              }
          });
          root.getChildren().add(btn);
          primaryStage.setScene(scene);
          primaryStage.show();
  
      }
  }
  

• HOW do you use the INS/PRT SC button to insert the copied data? It does not work! Help!

  I just got a pavilion DV6-7010us... I have always used the INSERT key when I copy data and insert into a message, chat screen, document... this computer has a key of INS/PRT SC.  I can't get the key to insert data into almost anything.   How do you use this key?  or is there another way to insert data that you copied, into something... ???  I'm used to use Shift + Insert key on my old laptop.    Right now, I try to keep in my mind to use the mouse to insert data... but would like to be able to use the key on the laptop keyboard.

  Is there a way to do it?

  Thank you

  Barbara

  You must identify your laptop for each of us to have a clue as to what looks like your keyboard. There are so many models of HP to be precise.

  Remove the battery and look for the label that says p/n. Post this string alphanumeric together here. It is your HP product number. G6 or dv6 and dv7 are all just model numbers.

  You can also do this by using Ctrl + C to copy and Ctrl + V to paste. That's what most people use to copy and paste in most applications and productivity programs.

  Because Windows 7 has the capture tool, I didn't even use the Ins or Prt Scr.

• Cannot install SP2 after you use the sony recovery disk.

  After Reformatting drive C using the Sony recovery disk, I am not able to download windows SP2 successfully.  Is there a code number I should be go in first.  Windows XP was already preloaded.

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW to get a computer running slot than WinXP SP1 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

• How do you find the last time that an address older Windows Live Hotmail has been used if you don't remember the password?

  How do you find the last time an old hotmail address was used... especially if you can't remember the exact password?

  original title: old hotmail address

  How do you find the last time an old hotmail address was used... especially if you can't remember the exact password?

  Good enough if you can't on the account and you can't prove it is yours in order to regain access (via password self-service reset, etc)-then you won't know anything about the account.

• When you use the feature of period of Parental controls for my child's account, the session is saved, and although very convenient for the user, it's boring for the parent. How can I disconnect this acct when it expired already?

  When you use the period of Parental control feature, acct of my child receives the 15 min and 1 put min warning, and then the closure of the session. However, any Web site that it has a really annoying music keeps playing even when I connected under my account admin the only way I can disconnect the acct with Parental control game is to restart my whole machine. Is there another way to disconnect the user standard acct with this feature of limitation in time game? THX.

  Hi marion_librarian

  Thank you for using the Microsoft Answers Forums!

  This is the problem of design, the session remains active in the background, however, so the next time they connect, they can pick up where they left off without losing any of their work.

  In case if you complete the program, there is no these settings in the parental control to close the program, you can disconnect the program using the Task Manager.

  Check the link for more information:

  Explore the features: Parental controls:

  http://www.Microsoft.com/Windows/Windows-Vista/features/parental-controls.aspx

  Set up Parental controls:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  NOTE: When you log in as an administrator you can connect to the wide of other users. Follow these steps to log on to the account with Parental control and/or any other user.

  1 click-right on the taskbar and open the Task Manager.

  2. Select users

  3. right click on the user name you want to disconnect, and then click close session.

  Hope this information was useful.

  Let me know if it worked.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 5610 how do you use the photo HP58 cartridge?

  I have an officejet 5610 and bought the photo HP58 cartridge.  The problem is when I try to print a color photo, the printer uses the HP22 cartridge.  How can I force it to print in color with the HP58.  I bought the HP58 because the site HP said that it is compatible with the printer.

  Hello

  58 Photo cartridge is not used by its own, the pritner uses the 58 and 22 cartridges ink in order to improve the quality of the colors, it will use the cartridges when printing and not only 58 ink cartridge,

  Hope the next informaion may help:

  Use a photo print cartridge
  
  You can optimize the quality of the color photos you print and copy with your HP all-in-. -
  
  One by buying a photo print cartridge. Remove the black cartridge and insert
  
  81 user guide
  
  Maintain your HP all-in-one
  
  the picture in its place print cartridge. With the tri-color print cartridge and photo printing
  
  cartridge installed, you have a system of six inks, which offers improved color quality
  
  photos.
  
  When you want to print ordinary text documents, exchange the black back ink cartridge in.
  
  Use a protector of the ink cartridge to secure your print cartridge when it is not
  
  used.

• How do you use the config.xml file to determine which version of an application, a user will download?

  I have two APKs for the same application and I implemented the config.XML of lower version number working for all screen sizes.  The config.XML for the higher version number is set up for only the scresns large and extra-large.  Here's the code from the config.xml file.

  Version 1

  	< media screens android: anyDensity = "true" android: Center = 'true '.
  	Android: smallScreens = "true".
  	Android: normalScreens = 'true '.
  	Android: largeScreens = "true".
  	Android: xlargeScreens = "true" / >

  Version 2

  	< media screens android: anyDensity = "true" android: Center = 'true '.
  	Android: smallScreens = "false".
  	Android: normalScreens = "false".
  	Android: largeScreens = "true".
  	Android: xlargeScreens = "true" / >

  When I try to download the app on Google game, only the top version is available, regardless of the size of the unit.  When I asked Google game why this was not behave as expected, they said that the file manifest for both applications is the same.  Here is the code, they shot in the manifest after having used PhoneGap Build.

  < media screens android: anyDensity = "true" android: smallScreens = "true" android: normalScreens = "true" android: largeScreens = "true" android: Center = "true" android: xlargeScreens = "true" / >

  Can someone explain why PhoneGap Build is not using the settings I set in the config.xml file?  And how to fix this?

  The tag is not a valid tag in the config.xml file. This is probably why you see the same tag in two, as the build service is ignorant.

  As to how solve you this problem. Currently, you can not, but the next version of android-cordova will include the ability to add a tag which you will be able to use like this:

• AR: How do you use the remaining amount for another account later?

  Hello friends,
  GM, how can I use amount remaining for another Bill to internship (AR) later?
  
  Concerning
  Krish

  Hello.

  You can use the same way as you did for the first time. Just the receipt of the request and apply the amount of unnaplied on another Bill.

  Octavio

• How do you use the step and resume for 10 indesign pages

  Hello

  I have a record for a mailing label. I have successfully used the step and repeat to create 2 columns and 8 rows for a document or a page. How to create 2 columns and 8 rows to say 10 pages with step and repeat? What you have to do with the pages?

  Thanks in advance

  You're simply trying to get additional copies of the same label? You don't want to do several pages to do, just print x pages.

  This looks like the same project of the other day. You really need to be clear about what you're doing: you said you wanted 50 copies of the same label and I told you not to worry about merging data, but maybe what you really meant you wanted pages full of the same label, but many different labels in the file. It IS a project of data merge, but you still would be implemented with stepa and repeat the process to put a series of placeholders in each position of the label, but you do only one page in the merge template. Merge all your records, one record per page, then print as many copies of the file as that required for the number of labels you need.

• How do you use the freqout as the sample clock to write data on the of 6224 PCI

  Using PCI-6224, I try currently to export data using the freqout as a reference clock sample to a digital output channel. I plug the scope to see the clock on the freqout PIN. However, the data seem to be missing. How can I output the data correctly using the reference for timing? What am I missing that connects the two signals together? Any help would be greatly appreciated. I am writing this code in MS VS C++ and here's what I've done so far:

          int32       error=0;
          TaskHandle  taskHandle=0;
          TaskHandle  taskHandleFRQ=0;
          char        errBuff[2048]={'\0'};
      uInt8       data[8]={1,0,1,1,1,0,1,0};
  
      /*********************************************/
      // DAQmx Configure Clock
      /*********************************************/
      DAQmxErrChk (DAQmxCreateTask("",&taskHandleFRQ));
      DAQmxErrChk (DAQmxCreateCOPulseChanFreq(taskHandleFRQ,"Dev2/freqout","",DAQmx_Val_Hz/*Units*/,DAQmx_Val_Low/*IdleState*/,0/*Delay*/,10000/*Freq*/,0.5/*DutyCycle*/));
      DAQmxErrChk (DAQmxCfgImplicitTiming(taskHandleFRQ,DAQmx_Val_ContSamps,8));
  
      /*********************************************/
      // DAQmx Configure Digital Output
      /*********************************************/
      DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
      DAQmxErrChk (DAQmxCreateDOChan(taskHandle,"Dev2/port0/line0","",DAQmx_Val_ChanPerLine));
      DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,"/Dev2/PFI14",10000,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,8));
  
      /*********************************************/
      // DAQmx Write Code
      /*********************************************/
      DAQmxErrChk (DAQmxWriteDigitalLines(taskHandle,8,0,10.0,DAQmx_Val_GroupByChannel,data,NULL,NULL));
  
      /*********************************************/
      // DAQmx Start Code
      /*********************************************/
      DAQmxErrChk (DAQmxStartTask(taskHandleFRQ));
      DAQmxErrChk (DAQmxStartTask(taskHandle));
  

  I think that the original code was operational. However, given that the data transmission has been set to finished, I had a hard time to visualize the data on my scope. By changing the value of DAQmx_Val_FiniteSamps to DAQmx_Val_ContSamps, I could easily see the data.

  My mistake. I'm still learning here. Thanks for the time.