How does a BPEL knows when he has completed the batch file?

Similar Questions

• How does Card Crypto knows what ISAKMP policy to use?

   ip access-list extended ACL_SITE1_TO_SITE2 permit ip 10.0.12.0 0.0.0.255 10.0.22.0 0.0.0.255 ! crypto isakmp policy 10 encr aes hash sha256 authentication pre-share group 14 crypto isakmp policy 20 encr aes 256 hash sha512 authentication pre-share group 16 crypto isakmp key cisco123 address 200.0.2.2 ! crypto ipsec transform-set [TRANS_SET]PHASE_2 esp-aes esp-sha256-hmac mode tunnel ! crypto map [CRYPT_MAP]VPN_SITE1_TO_SITE2 11 ipsec-isakmp set peer 200.0.2.2 set transform-set [TRANS_SET]PHASE_2 match address ACL_SITE1_TO_SITE2 ! interface FastEthernet0/0 ip address 200.0.1.1 255.255.255.0 crypto map [CRYPT_MAP]VPN_SITE1_TO_SITE2

  How does Card Crypto knows what ISAKMP policy to use, or use of the ISAKMP policy at all?

  It comes from "ipsec-isakmp?

  I mean... I do not see any "set isakmp policy 10" in the Crypto map

  This is what he chooses just the top-down approach?

  As part of the negotiation of the phase 1 and is a top-down proposal based on the sequence number.  You can get the details in tunnel using configuration:

  Debug crypto ISAKMP

  Cisco IOS has built/strategies default ISAKMP, but the pre 15.x versions were terrible default.  New default values are strong, although I still like to configure them myself.

• Mahjong Titans error 'window that says (subject) and that Windows would let me know when they have solved the problem."

  Original title: executable for Mahjong Titans has stop working

  So, I found how to Activate games under Windows 7 (64-bit).

  However, when I clicked on Mahjong Titans and responsible for turtle, he placed the tiles, but to the high jump this window which says (subject) and Windows let me know when they have solved the problem.

  What is with that?

  Hello

  I did the same thing on my computer, after loading turtle; I didn't get the message.

   

  Method 1: I suggest you turn the game Turn Windows Feature On or Off and see if that helps.

  Step 1:

  See the following steps:

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the game then uncheck the brand in front of Mahjong Titans.
  d. restart the computer.

  Step 2.

  b. read the following steps:

   

  
  Go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the game and check the brand in front of Mahjong Titans.
  d. restart the computer.

  Method 2: SFC scanner.

  SFC scanner. System File Checker (SFC) scan will replace the missing or corrupted system files on your computer.

  Reference:

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files:

  http://support.Microsoft.com/kb/929833

• How to stop screen flashing when I go to the itunes store?

  How to stop screen flashing when I go to the i tunes store?

  It is not very useful, but it seems that this problem has been resolved by only showing is not the store at all!

  Not 'progress' I was looking for. Issue still ' live'.

• Image shows two NEF + JPEG, how do I know if I'm editing the RAW file?

  In the library module, I have images that show the NEF + JPEG.  When I click on the image and move the develop module, how can I know that I am editing the RAW file?

  ILoveMyNikon wrote:

  NEF + JPEG

  Interpret as follows: raw file 'NAVE' a 'sidecar' jpeg disk file too, which was not imported, but is "follow-up." i.e. it is a NEF file.

  The best way to develop the module file is raw or jpeg is to look at the cursor to temperature: temperature of jpeg is incremental, centered at 0, gross temperature is in degrees kelvin.

  Rob

• My iphoto does not open. When I click on the circle still turns but nothing happens. I tried to open it with option to order and reconstruction, and nothing happened. I have version 9.2.3. Any advice will be greatly appreciated.

  My iphoto does not open. When I click on the circle still turns but nothing happens. I tried to open it with command + option and reconstruction and nothing happened. I have version 9.2.3. Any advice will be greatly appreciated.

  If you recently updated to El Capitan, your version of iPhoto is not compatible with this OS.

  What version of Mac OS X are you running?

• HP ProBook s 4540: How can I tell if my laptop has all the spare HARD drive bay or not?

  How can I tell if my laptop has all the spare HARD drive bay or not? I want to use an SSD, but also my HARD drive as secondary.

  @ShohagDr

  This model has only one.

  Your maintenance and Service Guide here.

  http://www.HP.com/CTG/manual/c03758231.PDF

  Laptop HP ProBook s 4540 - videos to remove/replace

  http://h20464.www2.HP.com/results.htm?SID=5229455&MEID=0B16F6F9-A9BB-4275-8FB4-57CCA3816318

  REO

• Outlook does not open. -When I click on the e-mail icon

  My outlook does not open. When I click on the email icon, it opens a Web link of the Explorer of Windows Live.

  For questions of Outlook:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-AU/Office/default.aspx?tab=2#tab=3

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• SVG to work when it is run animate(ctrl enter) dashboard but not on when I open just the html file

  Hello

  I make a game AB = nimate and I have a character of svg that can be custom colored. It works fine when I run the code of edge animate(ctrl enter) but not on when I open just the html file

  I get this error:

  Uncaught SecurityError: cannot run "getSVGDocument' on 'HTMLEmbedElement': blocked a frame with original 'null' to access a setting with original 'null '. Must correspond to areas and ports, protocols,.

  EdgeCommons.js:130

  and click in the interactive svg part is not recognized...

  Someone at - it anidea how to fix? I don't think it's my code because it works without problems during the preview in the browser host. BTW, I use chrome browser locally.

  any help appreciated.

  Thank you

  It is a security error Chrome because of its policy of origin even on local files.

  If you run it on a server (like when you watch of animate) you will not face this error.

  I don't know if there is a way around this.

  See for more information, see if any of the solutions provided you should be http://stackoverflow.com/questions/3076414/ways-to-circumvent-the-same-origin-policy

• How to upgrade a driver automatically in Windows NT by using the batch file

  I use the devcon tool to update a Windows XP driver, but unfortunately it does not support Windows NT. So I'm looking for a similar tool for Windows NT. Does anyone know any tool / or script that would update a driver via file/command line in Windows NT?

  Thank you for taking the time to read the question.

  Hello supportalcon,

  Thank you for the question!

  It is disheartening to know that have problems you with the Windows Driver. As I understand it, you need to update a driver automatically in Windows NT by using the batch file.

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/categories/

  Meet us if you face any problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• The program I use is called Defraggler is a simplified version of windows Disk Defragmenter. It is not defragment my disk correctly. It is said that it has completed the defrag but it's still 23% defragmented files defragmentation

  The program that I use is called Defraggler, it was created by piriform LTD and it is a simplified version of windows Disk Defragmenter. It is not defragment my disk correctly. It is said that it has completed the defrag but it's still 23% defragmented files defragmentation. I pressed defrag again and again but he still took no action and said always full defragmentation when clearly there is no. I myself had a look at the options and settings and it should properly according to them. Any help will be kind of you. Thank you.

  http://Forum.Piriform.com/index.php?s=6f56df458b93b49ff84c76f6fcd13a05&ShowForum=19

  Kindly repost of Piriform Defraggler forums for help with their programs.

  http://docs.Piriform.com/Defraggler

  And read the Defraggler troubleshooting, info etc. at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.SnapFiles.com/reviews/Auslogics-Disk-Defrag/adiskdefrag.html

  You might try the Disk Defrag at the link above instead of Defraggler.

  See you soon.

  Mick Murphy - Microsoft partner

• How to reset the default program to open the batch files?

  Original title: I have a batch file and I've changed the default opener of the batch file, HOW to reset it so my batch file work properly again?

  I have a batch file that I use allows me to select a list of websites that I frequent. I accidentally changed the default opener of the batch file, HOW to reset it so my batch file work properly once again, now when I run it it opens for editing.

  Hello

  Control Panel - default programs - associate a Type of file or Protocol with a program.

  Here's what it should be:

  description = current Application of the Windows Batch file .bat = unknown application

  You can use the methods here for re - associate the file type:

  Restore the Type Associations by default Windows 7 file Extension
  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  If necessary, this can be used to not associated with the file type.

  How Unassociate a Type of Extension file in Vista and a utility to help (Windows 7 too)
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Driver management has completed the process to add the HdAudAddService Service

  At windows 8, just upgraded to 8.1 windows and sound does not just work. I refreshed the pc, the sound seems to come back but then then after 10 hours, the problem came back use a toshiba satellite pro just 1 year and it is in perfect condition until I upgraded to 8.1 windows and this is the message that appears on the sound properties

  Driver management has completed the process to create the Service HdAudAddService of ID device Instance HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1002\4 & 9339 A 11 & 0 & 0001 with the following status: 0.

  Driver management concluded the process to install the driver hdaudss.inf_amd64_70c6945afa5f06b5\hdaudss.inf for the Instance ID of device HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1002\4 & 9339 A 11 & 0 & 0001 with the following status: 0x0.

  Method 1 worked 100% here!

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/driver-management-has-concluded-the-process-to-add/04857a5a-5c8e-4790-9D24-5f4c40591a0e

  YES!

  No need to uninstall my drivers!

  I worked in the Services and tinkered with him and he started etc but change for local totally worked!

  YES!

  Thank you!

• How can I change my fill of tru for the pdf file and the sign? It will never change.

  How can I change my fill of tru for the pdf file and the sign? It will never change.

  In Adobe fill & sign you can add text, checkmarks, an X, a point and a circle and sign documents.  It does not "change" the existing content of the document.  Here is a tutorial: Tutorial: Introduction to Adobe fill & sign

  Thank you

  Josh

• How to kill the Batch files

  Hello
  
  I have three files batch for the aggregation.
  
  I used maxL in the batch file, and there are nearly 10 scripts of aggregation.
  
  Sometimes I have to kill the batch files... Can anyone please suggest how to kill the ball file while running.
  
  
  Thanks in advance.

  Depends on who do OS you run the script, you run the script and why you want to kill the script
  The script can be killed, but this does not mean that the current operation of essbase, you may need to use maxl /eas to try to kill the active session/query.

  See you soon

  John
  http://John-Goodwin.blogspot.com/