How does choose Illustrator where to paste objects appear?

Similar Questions

• How does one know where is runningscript long and how does one get rid of it

  It appears that when I do something not too sure how to get rid of or even find it help please

  Hello

  ·          Are what script you referring?

  ·          What security software is installed on your computer?

  ·          Did you of recent changes made to your computer?

  ·         You receive an error message?

  Method 1:

  Step 1: Check to see if the problem exists in Mode without failure.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

  Step 2: If the problem does not persist in Mode without failure, then try to clean boot.  You need to perform a clean boot to find the program that is causing and then disable or remove.

  How to configure Windows XP to start in a "clean boot" State: http://support.microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Also check the event log viewer for the recent activity on your computer.

  This article describes how to use Event Viewer to view and manage the event logs in Microsoft Windows XP.

  How to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

• How to choose half of a title to appear as title 1 in the Table of contents?

  I am creating a document containing several job descriptions and want to have a hyperlink in a Table of contents description of each individual work. The way securities are in the format looks like this: "profile Description: President. The only part of the title I want to appear in the Table of contents is '' President. '' How can I select the part of the title to post a link in the table of contents? I've highlighted the portion of the line I want to appear as the title 1 but Word (2010) insists on the selection of the entire line and not just the part that I chose to be Heading 1. I know that I could drop the word 'Président' to another line, but it's not the look I want. I think I should perhaps use a bookmark or do something with the field but am way over my head on this one. I only know some of the basics and the terms bookmark and the field are new for me and quite mysterious. Any help would be appreciated, but I am a novice and must be crossed it work with no baby.

  KathieYZ

  Ok. I assume that you do this in Word?
  If so, then the word is part of office (for which there are specific forums on this site) and no windows.
  Click on the Forums link at the top of this window, choose the desktop, and then select the version of Office you are using and choose the word.
  Post your question here.

• Objects appearing a fraction of a second too late...

  Hi, I had trouble with the only object that appears a fraction of a second after the other the my slide.  Here, the smart form "instruction" should be visible when started this slide, but it will be half a second delay...  Anyone have any idea what may be causing this glitch?

  Below, I have a slide where the movie object appears half a second delay.  He will also appear at 0.0 seconds.

  

  Thanks for any help!

  Ryan, a certainly take a look at my webinar and to my previous answer.

  If you want to change a shared action, you need to use the second workflow, as I explained here.

  A shared action is not directly possible, you will need to turn it into a tip of edition action, then edit, then save it again as a shared action (you can use the same name). But you again to attribute it to any triggers.

  Lilybiri

• 'Manage account' page for SYNC has no controls other than change password, delete the account & disconnection? !!! How does one choose to synchronize the information on Safari?

  I am very impressed with this mozilla support. For one I got this detail section filled completely and communication it was not accepted when I pressed the button question post...! Half an hour to write these to the top... GO?

  Anyway to be more concise: I see the synchronization preferences page. I chose the stuff on the left side, and my computer is already pre-registered on the bottom.

  Other than that how does one choose what to synchronize with (in my case, Safari also can a sync for firefox 'cloud' there to prepare for a clean reinstall? And where would progress & achievement shown?

  Sync does not support cross-browser. I have working installation of Firefox Firefox installation only, with the synchronization server in the middle.

  The use of the term 'cloud' could be misleading; the data are encrypted and are decrypted in Firefox to be usable. Without the correct hidden 'key' [created from the password] data can not be decrypted and Sync does not connect to attempt to recover the data of the user.

  Not recommended to use Sync as a backup media for a clean reinstall of the OS. Some users have done the job, while many others have involuntarily lost their data because of stupid mistakes, they did, and wrong to understand how works the synchronization service.

  See this support article for how to back up and restore data in Firefox, which in your profile folder.
  https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles

• How will I know where to find an object?

  When there is already an object placed on the block diagram, how will I know where to find it in the hierarchy of the functions Palette?

  (Specifically VI Scripting - crosses, in this case.)

  You can find a range where it is enabled by get the context menu drop down for the item (right-click if you use Windows). In the second section of the menu the first element (in most cases) will be the palette that contains the object.  For the crossbar for GObjects.vi the first item in menu in the second section is VI Scripting palette. For a larger? the first item on the menu is the comparison. A primitive as array to build, you go down to the first element "pellets" in the menu. It is still in the second part, but is not the first item.

  You can also select Replace in this context menu. The first enumerated palette will be the one that contains the item. However, it takes two clicks compared to the other to the above method.

  The Palette list detailed help files have on the line under the name of VI. You can access this by clicking on the link detailed help at the bottom of the window context ehlp.

  If the object is a VI, Show VI hierarchy include VI selected lib and see the full path in the labels of VI will show the location on the disc, but which does not correspond exactly with the paddles.

  Lynn

• How to choose a song where I left off?

  I'm sure there must be a simple answer to this, but if I turn off my Sansa Connect, while he plays a song, how to pick up where it left off when I turn it back?

  Have you tried to just sleep (quick press of the button / stop) rather than stop it (hold power for about 8 seconds)?

  I don't really know who does not work as I don't have my connection with me right now.  I'm sure that it will play the same song, but I don't know if she'll resume exactly where you left it.

• How can I return a normal dynamic object from the library (cloud symbol) to a smart object

  I only change my dynamic in Illustrator (via double klick) object when it is not in the library.

  Unfortunately, I did not know that from the beginning and now I have a few documents where all the objects are in the library and can't do em to open in Illustrator.

  When you paste from Illustrator into Photoshop, you can choose how to paste, but there is also a checkbox "add to my current library.

  Maybe this has been verified.

  But you can always change them when you open the library in Illustrator and double-click on it.

• How to choose the right version of publishing app when you choose to change the image of in InDesign?

  Hi all

  Normally when I want to edit a picture that is in a page layout in InDesign either, I press option-click on the image, or ctrl-click on the image and choose to edit using the CC of Photoshop, Illustrator CC or another app I need to use at any specific time. Well, I also have backups will only backup my entire system and so all my applications get saved as well.

  Well, what's happening now (for today) is that when I choose to edit the image, it is opening Photoshop (or Illustrator, etc) from my drive backup and not within the app on my main drive. So, even though I already have Photoshop open as I work in InDesign, when I try to edit an image it will open the copy of BACKUP of Photoshop AS well I tried to choose 'other' when ctrl-click on the image and choosing to Ed... but when I navigate to the here where Photoshop is on my main drive, I can't choose the main application because it appears to show the main application of Photoshop as a folder with the that there is content packaging.

  How the hell can I fix the path to the correct version of Photoshop, where I need to do the editing? I must now go to things a way hijacked by browsing up to where the image is in the finder (via ctrl-click on the link of the image in the LINKS Panel and choose "show in finder"), but it takes twice longer :((, it wouldn't be so bad if I didn't have as many images as I work with that I'm doing now.

  Any help or advice will be appreciated :))

  Thank you kindly,

  Christine

  Just guessing...

  The problem is if Photoshop CC on the primary drive is open? If this is not the case, consider set to open at the start of the computer. The current instance might prevail over those inactive.

  Usually, the installed in last instance of an application is the one linking operating systems (OS X & Windows) with a document file that calls for the application, for example, by double clicking in Finder/Explorer. It is common to see the new version called (say CC Photoshop rather than Photoshop CS 6) because the new version is usually the last installed. Because Adobe CS applications typically install new versions of common files, it is recommended to install releases in chronological order, if it is necessary to reinstall the applications when there are multiple instances on the same computer. For example, to install Photoshop CS4, and CS5 and CS6; If an earlier version is installed when a newer version is present, the previous common files can cause application problems. One consequence of this is normal, but sometimes annoying, behavior that at the launch of an application by throwing one of his files, the new version is open because this is the functioning of the operating system.

  In your case, it is possible that the operating system sees Photoshop of the backup drive installation the new installation and lance. Perhaps to save Photoshop CC makes this instance appear most recent for the operating system. Remember to leave Photoshop CC out of the backup operation. If it works well! If this isn't the case, you may try to start the computer from the backup disk, run Photoshop, then exit and restart the computer from the main drive. If this solves the problem, maybe try to start from the backup disk, then reinstall Photoshop top and then restarting the main player. If it works, it can "keep", or an operation like backup, could reduce to naught all your smart stuff.

  Maybe one of these strategies may be a permanent solution.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• How does Firefox read-ahead?

  Hello

  I want to know how Firefox implements the preloading of the web (not the part about how it gets and analyzes the indication of extraction, but the part after he analyzed the indication of extraction, how does he pick up objects and store it in the cache.) If it's not done to get, how it sends the request to not ask for the party for whom it does not receive and so on). Could someone do the reference to me where I should look to get the source code?

  Thanks in advance!

  Hello

  I think the code you want to be found here: https://mxr.mozilla.org/mozilla-central/source/uriloader/prefetch/nsPrefetchService.cpp.

  If you have any other questions, please ask the Firefox team in the #fx - team on Moznet channel.

  (For customers recommended IRC, please read https://wiki.mozilla.org/IRC#Pick_an_IRC_client)

• How does the remote collector?

  I'm not clear on the role of remote collector.

  How does the remote collector? He interviews / transmits data to the internal manifold? What is the flow of data?

  Thank you

  -isayani

  Isayani,

  It was stated earlier in this thread - a case of primary use for the remote collector is to collect metrics to an environment that is separated by a logical or physical network complexity.  For example, a demilitarized zone where you want to just open a minimum of connections internally or to a remote location where you have limited network connectivity and wishes to consolidate the collections to save bandwidth.

  You can also choose to add another collector if your vC Ops server is of limited resources.  However, based on the environment of size that you used in your example, there is no advantage and only an additional complexity of having several collectors.

• How to use Illustrator SDK of FrameMaker plugin?

  Hello

  I am absolutely new to Illustrator SDK (downloaded 2 days back), even though I have some experience in FrameMaker 12 SDK. My problem is as follows:

  I have a FrameMaker document, where have been incorporated to the Illustrator (.eps) files. I need to develop an application that will find some texts in the document and replace them with others. I know the source text and their replacements. The text to replace can be in the FrameMaker document, as well as in any embedded Illustrator document.

  So far, I have developed a plug-in, FrameMaker, which may be invoked by a menu of the FrameMaker option. If the user opens FrameMaker, loads the document, then calls this plug-in, it will properly replace strings in the FrameMaker document. Now I'm stuck with replacing the strings in the embedded Illustrator documents. I can find the name of the Illustrator files that are integrated and should be treated. But I am confused how to use Illustrator to my FrameMaker plug-in SDK for find and replace these strings? Any idea?

  I read the software Illustrator SDK documentation in the last two days and it seems that I have to use is Adobe Text Engine classes (I could be wrong but) who can manipulate the text in an Illustrator file. Is this correct or is there a more easy/better way? Even if I try this approach, how should I proceed? Should I try to develop a plug-in in Illustrator using classes ATE? If so, how do I invoke that FrameMaker? I should start by Illustrator program, load the document illustrator in it and then some how (how?), call the plug-in which will replace the text, save the file and close the Illustrator? All this has a sense or I'm hiking? Is there a simpler way? It doesn't have to be a manual intervention after the user call my FrameMaker plug-in and everything must be done automatically from there.

  Another little thing. Try to compile and run the example of Illustrator SnippetRunner ATE, I'm stuck as it used Microsoft Foundation Class (MFC) and I have Visual Studio Express Edition 2012, which does not support MFC. I hope that we can develop plug-in in Illustrator without the help of MFC. Can someone please confirm?

  Any help will be much appreciated.

  Thanks in advance,

  Joydeep Ray

  You cannot use the Illustrator SDK of your plugin for FrameMaker. The SDK only works in a plugin Illustrator loaded by a current version of Illustrator. All of your users will have installed Illustrator? If all embedded files are all eps, then you could probably treat the files yourself.

  You don't need MFC to create a plugin to HAVE. I think that the only "MFC" in the samples is "afxres.h" #include in the resource (.rc) files. If you replace this with #include "windows.h" it will probably work.

• How to do 1 object appears behind and in front of the different parts of a letter?

  Hi, I use Illustrator CC, there are 4 orange objects and the letter A in the image below. The blue arrow is at the point where I want the orange object appears in front of this part of the black letter A. The green arrow indicates where I want to be orange to stay behind this part of the letter was. Can anyone suggest how to do only the orange part (blue arrow) appear in front of the letter A, while maintaining the orange gradient? I tried to use the scissors tool to cut out the object in half and then re - organize, but this tool seems to 'reset' the gradient.

  

  Thank you all. I was struggling for a while with masks and then got the result desired with the Eraser tool. I duplicated the orange object, there in front of the letter and then use Eraser tool to remove unwanted orange object parts. It is the best way to remedy this situation, I think.

  Thanks again for your help.

• Adobe Livecycle WSDL for Siebel - how does it work?

  Hello

  I'll have a look at the standard integration Siebel and Adobe Livecycle. Siebel Documentation, is not quite clear how PDFs are created from Siebel consumer data. I understand that a standard outgoing Webservice (provided by Adobe) should be created for this, but how does it work? My understanding is that the request is sent to the Adobe Form Server to deploy the Adobe PDF file. How it is configured so that the integration knows where to place the PDF? In this case, the Siebel FlieSystem I guess.

  Any comment in the general overview

  Hello

  Here, this forum is for issues related to the SUPPLY.

  Help with your question, I would recommend that you take a look at this list here and choose the forum that corresponds to the product you are using or the question you have:

  http://forums.Adobe.com/community/LiveCycle

  Best,

  Julien

  Quality of SUPPLY engineering

• What is "align to stage" and how does it work?

  Interestingly, I could not find any solid data on what "align to stage" in the built-in help of Adobe.

  What is "align to stage" and how does it work?

  I thought that maybe it was something to align a shape to Center on the scene, but no. I can choose the form, select "Align to stage" and the form does not move.

  Suggestions? Thank you-

  On the Panel line UP, you should see on the right the: ' on stage: Click the icon beside him, {looks like a box with arrow on each corner}. Each and every time you want an object to align within the scene, you must select this option.

  Good luck!

  YSONG