How DRM works very very slow

Similar Questions

• Satellite A500 - 13W HD4600 v8.634.1.0 ATI works very slow with large excel sheet

  Hello

  I have the problem that my old IBM T43 in the very fast work of the factory with some Excel sheets. My Toshiba and more recent need spend a lot of time the term of the leaves.

  I don't know if the video may be the problem, or...
  1.

  Anyone know how I can test the video?
  How fast it works with excel?

  I use the updating of toshiba, so I hope I have the drivers actually.

  Thank you very much

  Jürgen

  Hey,.

  Do you use the same version of office on two laptops? Normally the A500 is equipped with Office 2003 and Office 2007 version of trial and that s a little more slowly or more, in my opinion. So this could be one of the reasons for this.

  In addition, you play a little with the power settings. Try it with balanced and efficient fashion. It is best to watch videos and play games.

  If you have a large Excel files, try to defragment the HARD drive. It is always useful.

• Lightroom works very slow all of a sudden

  I searched and read all the forums on the optimization of the performance of Lightroom (How to improve and accelerate the performance of Photoshop Lightroom) and have watched many videos with tips on improving the performance on YouTube and have not yet found a solution.

  Question: After a few months of using Lightroom, it suddenly became unusably slow. It was not a demonstration of deliberate for its slow over time. Instead, one day it was usable, and the next day he was not. Even in the library module it lags to switch between images. When I press F for full screen, where it was instantaneous and now takes about 10 seconds and is then stuck in fullscreen. This is true for the large images and old photos of iPhone even in low resolution. Can import is no longer the same wait more than a minute between clicks.

  On my computer

  • 2015 Macbook Pro (a few months)
  • OS X El Capitan 10.11.2 running
  • Intel Core i5 at 2.7 GHz
  • Memory - 8 GB 1867 MHz DDR3
  • Graphics - Intel Graphics Iris 6100 1536 MB
  • Hard total is 120 GB
  • Drive hard use 96 GB of the - 47 in photos and approximately 22 GB in "others" which I suppose is a majority of the Lightroom data
  • I almost exclusively use this machine for browsing the web and photography. Nothing else. very few other programs and file type

  On my Lightroom

  • Lightroom CC
  • 2015.2.1 release
  • 5 864 total photos on the computer and my main Lightroom Catalog
  • Only about 60 have changed considerably in the develop module
  • Majority taken on a JPEG of A6000 Sony 24MP camera

  What I tried to solve the problems, does not

  1. Read a lot on the size of the catalog. Mine is still quite small, but I've tried closing the catalog and begin a new one with about 200 shots straight out of the camera. This has not solved the problem.
  2. Optimized catalog
  3. Preferences changed to automatically reject 1:1 previews after a day.
  4. Top left says nothing about the rendering preview. This along with the fact that the issue has been sudden leads me to believe that "Preview size" are not the issue, but I could be wrong.
  5. I tried to move all my photos on an external hard drive fast - catalog file was still on my computer, but I had a lot more space on the machine. This has not solved the problem
  6. I turned off of face detection, because he had tried to distinguish faces
  7. Increased raw cache size of camera

  Lightroom isi the only app I had problems with. Everything else is zippy and smooth. Help, please!

  Hi robertr,.

  • Lightroom CC
  • 2015.2.1 release

  The first suggestion would be to upgrade your Lightroom to the latest version 2015.3. Select Help<>.

  See the maintenance of Lightroom

  Let us know if that helps.

  Kind regards

  Assani

• 7 fusion works VERY SLOW on the GM of Yosemite

  Basically, Fusion 7 is unusable on GM from Yosemite as 7 fusion is so slow.

  When I was still on the Mavericks 10.9.5 Fusion 7 worked just great. That's happened?

  Is anyway that I can fix it? Or do I have to wait for an update?

  Same thing here... registered just to comment on this issue.

  I meet the same problems of poor performance, use of the core processor 1 power with VMware Fusion 7 on and off as well as Parallels Desktop 9 has the same behavior.  The problem is random, because sometimes I'll run a virtual machine in the app and it will work normally, other than that it is a used CPU and the virtual machine is extremely slow - especially if you do not keep the window in the foreground.

  This question seems isolated to the iMac and final Yosemite 2011.  I had this same behavior in one of the previous public betas of Yosemite, some, it feels like an issue on the side of Apple and not one which on VMware.

  Edit... Apparently this problem may be related to these particular Mac NVRAM preferences, and they say running sudo nvram boot-args = "debug = 0xd4e" should solve the problem.

  See this link for the original information: http://forum.parallels.com/threads/parallels-10-running-slow-on-yosemite.326205/

• 4-1043CL ENVY: ENVY 4-1043CL 10 upgrade Windows - works VERY slow, suspicious cache drive does not

  Hi there - put on day of Windows 7 64-bit of Windows 10.  Update seems to be fine - no errors, the system starts and 10 Windows deskop seems to struggle and work - but performace is terrible compared to Windows 7.  The start-up takes ~ 2:15 for the desktop to appear first, then ~ 3:30 total for applications to load (hourglass disappears).  Firefox takes ~ 1:30 to open go icon click to show my Yahoo home page.  MUCH longer than using Windows 7.

  I suspect that the cache of 32 GB drive configuration have not upgraded correctly.  I have uninstalled and installed the latest drivers Intel RST (dated 26/08/2015, using SetupRST.exe from the Intel download site) - the Intel RST icon finally appears in the system tray and wrote that the RST is running correctly.  Intel RST is enabled in the BIOS.

  Thoughts welcome - thanks!

  Update: swapped stock a new SSD HARD drive (500 GB, but a 240 GB should be fine for most), removed the drive to boost 32 GB mSATA (is more necessary since the main drive is SSD), and did a clean install of Windows 10.  This laptop now works fine.

  BTW, the one feature that does not have a driver through the W10 std install in Device Manager appears to be satisfied by the «HP ProtectSmart Hard Drive Protection Software» fashion

  This notebook should be good for a few years.

• I just downloaded firefox and it works very slow, taking a few minutes to change screens when you click on a Web site.

  I am unable to use firefox at all. It takes so long to do something after the first web page loading. Once the first page laods, it freezes and takes a few minutes to do anything

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • http://KB.mozillazine.org/Firefox_hangs

• InDesign work very slow

  When you open an existing document or create one, InDesign crashes, freezes, or constantly displays the progress bar.

  Here are a few things you could try to discover the cause of the problem: 6 tips to speed Up InDesign

• very slow computer Windows 7

  Original title: "after soafter a few days my computer os work very slow which is the resion behind thisme days my computer os work very slow which is the resion behind all this."
  After a few days my computer os work very slow which is the resion behind it all

  Hello

  1. don't you make changes on the computer before the show?
  2. you receive an error message?
  3. what software antivirus installed on the computer?

  
  Method 1:
  You can run the fix that it provided on the link and the Coachman.
  Difficulty of Windows system performance slow computer problems
  http://support.Microsoft.com/mats/slow_windows_performance/
  
  Method 2:
  You can also try the steps outlined in the links to improve the performance of the computer.
  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance
  Ways to improve your computer's performance
  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance
  
  See also the links in the help:
  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx

• My Firefox cannot be used. It's very very slow edit pages, load pages and so on.

  I have search and applied several suggestions found in Internet, but so far, no one solves the problem. Firefox uses a lot of memory (600,000) and lots of CPU (100%) and work very slow to load new pages or update pages loading.
  I use APP "Memory Fox" but is the same.

  Hello VictorTrindade, please, try to reset firefox and see if that can solve the problem...

  Please also make sure that firefox is not blocked by your security/firewall somehow software.

• iPad 2 running very slow and freezing

  My iPad2 worked very slow and freezing.  It is quite frustrating and I hope someone has a tip or a solution for my problem.  I've updated my ios and right now I'm in ios 9.3

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Mac keeps restarting and is very slow running

  Why not keep restart my mac and works very slow since I installed El Capitan?

  Most likely because you upgraded an already dysfunctional system without the first fix. Or your HARD drive may be faulty.

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

      When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

      back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

      ends, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  
  

  When you get it working properly, and then download and reinstall OS X El Capitan 10.11.3 Combo Update.
  

• USB 2.0 data transfer rate is very slow in Windows XP computer.

  Original title: USB 2.0 work very slow

  USB 2.0 data transfer rate is very slow, what should I do?

  Hi MahendraSoni,

  1A USB 2.0 works much earlier?

  2. don't you make changes on your computer before this problem?

  There is a fix for this problem. You can contact Microsoft Customer Service & provide article kb 908673, which contains the fix.

  Hope the helps of information.

• Download speed very slow on the wired Ethernet connection

  I am currently getting 200 Mbps down and 0.3 MB/s on my desk wired Ethernet connection. I should get 200 down and 20 upwards.

  • On my wireless adapter on the same router, I have ~ 18 Mbit/s to the top and about 15 Mbit/s down, which seems that the wireless adapter works fine.
  • I plugged in another computer with the same cable on the same router port and got the full speed (200/20), then the problem lies within my computer.
  • I made a transfer of files to and from my computer to another computer connected to the same router and I got the full speed Gigabit times come and go.

  I searched high and wide on the internet and forums, and that many people have had the same problem I have, nothing of the multitude of solutions worked for me.

  That's what I tried without success:

  • Uninstalled the Ethernet card, deleted the drivers, forcing the new drivers to install again. No change of speed.
  • Carefully checked for Virus and malware programs (crossed the registry as well), but found nothing, and nothing has been installed recently other than windows updates.
  • The only antivirus I have is Windows Defender. I turned off and turned off the Windows Firewall, but speed did not improve.
  • I tried with IE, Chrome and Firefox, speed with different services and all tests show similar speeds. I also used FTP to a server I have, and the speeds were the same.
  • There is no other traffic devours bandwidth.

  So what I have gathered so far, it's that my Ethernet card works very slow only when downloading from the internet. Within my network, it works fine.

  What is a service that does not work well? If so who? I am not knowledgeable on the use of all services. I checked IPv4 and IPv6 and they both seem to be configured correctly, but I can't say that I am certain of what "correctly configured" is.

  These are my specs:

  HP Desktop H9 - 1215t

  Windows 7 Ultimate SP1

  32 GB OF RAM

  64 bit

  Chip Intel i7-3770

  Controller Atheros AR8161/8165 PCI - E Gigabit Ethernet (NDIS 6.20)

  I would really appreciate some help here because this problem I'm paralyzed.

  Thank you for your time,

  Tom

  By George, you got it!

  For someone who thinks he's good at Googling, I could sure use some improvements!

  The key has been the link to explanation. While I had been close to my tests, this for shows that even when you sort-of-one little-peut-be-think you know what you're doing to keep your legs unless you know EXACTLY what you are doing.

  The answer was definitely Large Send Offload, but it was a little more complicated, at least to understand what really happened. Neutralization of him gave the tour, but now I work with an active v2 and it works like a charm.

  I will detail what, in my opinion, happened here for those who may have similar problems so that they (you) may be able to figure out, as all cards are different and may require slightly different settings.

  I live in an area where so far the download speed over fast, I was able to get is 2 Mbps, on a good day, it's usually on average 1 ~ 1.5 Mbps. download speed is between 5 ~ 20 Mbit/s.

  I do a lot of video work and I constantly have to download large files on my servers. I got the computer described above about 8 months ago, and my Age (2 years) one remained on my home network.

  For a week or two, I was cursing my ISP because the internet was slower than usual and very glitch. I tested my speed and got 20 down and 0.2, repeatedly. So I went through the long and technology-challenged call representative to 'help' me, I was paying for 20/2. Only option was to wait a week for a technician to come out of my house, he stressed have shot my injurybut not before you ask me, that there are faster speeds to internet available in my place. 200/20 which is 10 times what I had, so of course I went with her. In doing so the representative asked me to Exchange my modem/router for a new handle faster speeds.

  When I replaced the modem/router, I found that the download speed went from 50/0.2 (after the new request speed but still with the old router) to 200/0.3~0.5 with the new router. I also had a Cisco E2000 router that I turned into a switch, which was also bogged down internet high speed (now that they have been much faster). But still the download speed has not really improved.

  This long and winding history is so that you (read this with a similar problem) might find the answer to your particular problem.

  Looking back when I said that the issue was in my computer because that became high speed was not quite accurate. The 'problem' was beyond my router, if the solution was in my settings with the LSO parameter. The 'problem' was not really a problem since what I see (guess) that's happened is that my ISP has been updated with equipment, and the settings on my new pc has become a problem while paradoxically not so in my old pc.

  My old pc equipped with a "Realtek PCIe GBE Family Controller" and the IPv4 LSO parameter turned on, that she was no problem under the new set of circumstances ISP. 200 / 20 Mbit/s.

  Then when I compared the setting on my new computer, it never crossed my mind that the neutralization of him would solve the problem.

  My new pc has a Atheros AR8161/8165 controller PCI-E Gigabit Ethernet (NDIS 6.20). This adapter has a setting "IPv4 LSO" more setting "IPv4 LSO v2" and "IPv6 LSO v2" décor. I don't think that my ISP uses IPv6.

  In my quest to solve the problem, I placed all of the above settings to "Enabled", without success and in my fog don't reverse these settings.

  With the 3 off, it worked fine, but I got a 5 ~ 10% improvement on the download speed with the LSO IPv4 v2 enabled and the other disabled.

  There is no way representing the service provider on the phone could know this, so calling them would not / has not solved the problem. Even waiting a week for the technician most likely would not have solved the problem as it would be measured using a laptop full download and the download speeds.

  I'm sure this will become a problem most current internet speeds that House are starting to soar (thanks Google!), so I hope this helps those who have similar problems.

  To summarize:

  Click on start->Control Panel->Device Manager->network adapters-> your adapter name (mine is Atheros AR8152/8158 PCI - E Fast Ethernet Controller (NDIS 6.20), right click and select Properties. On the advance tab, find good Large Send Offload (IPv4) and change its value to disabled , and then click on OK.

  If you have a Large Send Offload (IPv4) v2 try to set that to enable (with either a handicapped of course).

  I hope this helps!

  And thank you George.

  Tom

• My projects always run very slow, what would be my problem?

  Hey everybody,

  For weeks, I worked in first and everything is still working very slow: most of the time I have to restore, even when I don't have no complex sequences (and takes forever).

  I'm not well edition 4K or something special (50 fps), but even that shouldn't be a problem with my Macbook Pro.

  
  

  My computer specs:

  -2.8 GHz Intel Core i7

  -16 GB of ram

  -NVIDIA GeForce GT 750M 2 GB

  I've tried the "'Mercury Playback Engine software only", and it does not really help. "

  Settings that I use:

  -RGB curves

  -Stabilizing Warp

  -(HLS) color balance

  Can someone help me?

  Tutorial on Vimeo https://forums.adobe.com/thread/1567965 codec

  Information about the codec & Format, with 2 links inside for you to read http://forums.adobe.com/thread/1270588

  MOV is a wrapper, which is inside YOUR package - exactly what is on the INSIDE of the video you are editing?

  A report with details of codec your file, use the following programs... A screen capture works well for people to SHOW what you do

  https://forums.adobe.com/thread/1070933 for instructions of screenshot

  Free programs to get information on PC/Mac http://mediaarea.net/en/MediaInfo/Download files

• My MacBook Pro suddenly becomes very slow, accepting orders very slow how to check if the ram is working properly

  My MacBook Pro suddenly becomes very slow, accepting orders very slow how to check if the ram is working properly

  You can try this download.   Etrecheck.   https://etrecheck.com/#about

  Then publish the report as a reply in this thread.

  It will allow us to review your system without disclosing a private matter.