How FTP a file from the client computer to the server database using Forms 10 g

Similar Questions

• BlackBerry smartphone how to copy files from the PC to BB

  How to copy files from the computer to the BlackBerry 9700?  I have a couple of Word and Excel files, I like to keep it with me on the BB.

  Thank you.  I didn't know that I had to hit edit.  I have never when I had my iPaq.

• I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  If you had a Time Machine backup, you can use the Migration Wizard and connect your new Mac on the external drive which has the Time Machine backup: move your content to a new Mac - Apple Support

• How to extract files from the Windows 7 installation CD?

  I remember that on Win98, I can use SFC. EXE to extract all those files. CAB files on the installation of Win98 CD and place the files extracted into a folder I want. In addition, I don't need to know where. CAB of the target file should be some.

  The SFC. EXE in Win7 replces only system files. It does not extract and put all the files as the SFC in Win98.

  So, how to extract files from Windows 7 installation CD?

  Hello

  ·         Why you want to extract the file from the Windows 7 DVD?

  ·         What file you want to extract?

  Some of the files will be locked or currently in use by the system so that you will not be able to replace their while that started in Windows 7. Therefore, SFC scan tool is used to repair any file corruption in windows 7.

  Design by default, you can extract the files. You can copy and paste the file into your Windows 7 DVD drive, refer to the article below:

  http://Windows.Microsoft.com/en-us/Windows7/copy-and-paste-a-file

  Hope this helps,

• How to transfer files from the old hard drive to a disc new hard, old hard disk has been removed?

  I had a hard disk going bad. Installed a new hard drive and the need to transfer files from the old hard drive. I have an external enclosure for the old hard drive and can connect by usb port.

  The process is fairly simple once you put the old drive in the external box. You can use the usual methods of copy and paste in Windows Explorer. If you copy files, complete folders, you can take a look at RichCopy.

  http://TechNet.Microsoft.com/en-us/magazine/2009.04.UtilitySpotlight.aspx

  Tom Ferguson

• How to combine files from the book in a single file-IND

  Hello

  I'm doing an InDesign file from the files in a book.

  I know the option book export to PDF, but I want is something like:

  Add bookfile pages 1 to a new document.

  then add the pages of bookfile 2 in this new document (at the end)

  then add bookfile pages 3 to this new document (at the end)

  until all pages of all bookfiles are combined into a single document.

  I will not place the pages (which makes them any pages and images).

  Is this possible? [Windows - Javascript platform]

  Is what I figured (as a non-programmer)

  to open the bookfile

  (var app.open(File("/c/Bookname.indb = myDocument"), false);

  use a counter for the number of bookfiles in the book

  for (i = 0; i < myDocument.bookContents.count (); i ++)

  {

  to retrieve the name of the bookfile

  var myINDFile = myDocument.bookContents.item (i) .fullName;

  }

  Theres a move command under menu panels Pages Pages. With it you can move pages also between documents... may be you can use programmatically too? In the InDesign Scripting forum guys know better, although some of them reads this forum too...

• How to download files from the file of database system

  Hello everyone.
  
  I m trying to do a procedure to download a PDF file that is stored in the file system of the server of the database and not inside the database. The established procedure is the following:
  
  create or replace
  PROCEDURE PRT_PR_DOWNLOAD_FICH (v_file_name VARCHAR2
  )
  
  AS
  
  V_LENGTH number;
  Lob_loc Bfile;
  
  BEGIN
  
  Lob_loc: = bfilename ('DIR_OBJ', v_file_name);
  V_LENGTH: = dbms_lob.getlength (Lob_loc);
  
  owa_util.mime_header ("application/octet ', False");
  HTP.p ("Content-length: ' |") v_length);
  HTP.p ('Content-Disposition: attachment; filename = "" | ") SUBSTR (v_file_name, INSTR (v_file_name, ' /') + 1) | '"');
  owa_util.http_header_close;
  wpg_docload.download_file (Lob_loc);
  
  END PRT_PR_DOWNLOAD_FICH;
  
  This procedure receive the name of the file to download and use the wpg_docload.download_file () function. The DIR_OBJ is a directory with path from the server to the folder that contains the files I want to download.
  
  
  I want to enable users to download PDF files stored in the file system of the database server, opening a backup / open window in the browser when the user clicks a button. When the user click on the button, the procedure is called and executed without error but save it / open window does not appear, instead the page it is simply charged, nothing happens.
  
  Can someone tell me what I am doing wrong and if it is the best way to download a file directly from the database server file system?
  
  Best regards from Pedro

  Hello

  It would help if you add

  APEX_APPLICATION.g_unrecoverable_error := TRUE;  
  

  as a final line of your procedure?

  BR, Jari

• How to download files from the database file system.

  Hello everyone.
  
  I m trying to do a procedure to download a PDF file that is stored in the file system of the server of the database and not inside the database. The established procedure is the following:
  
  
  create or replace
  PROCEDURE PRT_PR_DOWNLOAD_FICH (v_file_name VARCHAR2
  )
  
  AS
  
  V_LENGTH number;
  Lob_loc Bfile;
  
  BEGIN
  
  
  Lob_loc: = bfilename ('DIR_OBJ', v_file_name);
  V_LENGTH: = dbms_lob.getlength (Lob_loc);
  
  owa_util.mime_header ("application/octet ', False");
  HTP.p ("Content-length: ' |") v_length);
  HTP.p ('Content-Disposition: attachment; filename = "" | ") SUBSTR (v_file_name, INSTR (v_file_name, ' /') + 1) | '"');
  owa_util.http_header_close;
  wpg_docload.download_file (Lob_loc);
  
  
  END PRT_PR_DOWNLOAD_FICH;
  
  
  This procedure receive the name of the file to download and use the wpg_docload.download_file () function. The DIR_OBJ is a directory with path from the server to the folder that contains the files I want to download.
  
  When I run this procedure I get the error: "Internal Server Error".
  
  Can someone tell me what I am doing wrong and if it is the best way to download a file directly from the database server file system?

  Hello Pedro,

  Just out of curiosity, I tried your example ;-) It works very well in my environment! (Oracle 10g with OSH and Apex 3.1.2
  But: I had to grant READ permissions on my directory object to APEX_PUBLIC_USER!

  (1) I created a "test.txt" document in the directory corresponding with my EXPDIR directory object. 'Oracle' user needs read on the file & document permissions!

  (2) give APEX_PUBLIC_USER necessary READ rights on the directory object:

  grant read on the directory expdir to apex_public_user;

  (3) create the procedure:

  CREATE OR REPLACE PROCEDURE MATTHIASH. PRT_PR_DOWNLOAD_FICH (v_file_name VARCHAR2)
  AS
  V_LENGTH number;
  Lob_loc Bfile;
  BEGIN
  Lob_loc: = bfilename ('EXPDIR', v_file_name);
  V_LENGTH: = dbms_lob.getlength (Lob_loc);

  owa_util.mime_header ("application/octet ', False");
  HTP.p ("Content-length: ' |") v_length);
  HTP.p ('Content-Disposition: attachment; filename = "" | ") SUBSTR (v_file_name, INSTR (v_file_name, ' /') + 1) | '"');
  owa_util.http_header_close;
  wpg_docload.download_file (Lob_loc);

  EXCEPTION
  WHILE OTHERS THEN
  HTP.p (substr (dbms_utility.format_error_stack (): dbms_utility.format_error_backtrace (), 1, 4000));
  END PRT_PR_DOWNLOAD_FICH;
  /

  (4) Grant execute rights on APEX_PUBLIC_USER of this procedure:

  GRANT EXECUTE ON MATTHIASH. PRT_PR_DOWNLOAD_FICH TO APEX_PUBLIC_USER;

  (5) Finally, try if download document works well:

  http://: 7777, pls, apex, MATTHIASH. PRT_PR_DOWNLOAD_FICH? v_file_name = test.txt

  I would like to know if it works!

  HTH
  Matthias

• How to transfer files from PC to PC via a serial port using labview

  I need to transfer files (.txt, .doc, .xls) from PC to PC via a serial port using LabVIEW. Is it possible to transfer files, if so how to transfer?

  Yes, it is possible to transfer files with the serial port using LabVIEW.  The files are just collections of bytes and the serial port is good enough in the expedition of the bytes from one PC to another.  You must connect the ports series with a null modem cable.

  First, take a look at the example of serial communication.   In LabVIEW, go to the Help menu and select «Find examples...» ».  From there, you can search for "serial" or navigate to hardware input and output > series.  Select «Write series base» and Read.vi  Try this example to gain confidence on the serial communication methods.

  Then it's time to learn how to read and write files.  For this, the examples might be somewhat confusing as they deal with files that are presumed to have data of a specific type in them.  I would recommend just familiarize yourself with the functions in the file e/s palette.  Specifically, familiarize yourself with the following functions.

  1. Open/create/replace file - on the side of your destination, you will need to create the copy of the file you are trying to transfer
  2. Close the file - when you're done reading or writing to a file, you must close it.  It cleans the memory used and finalizes write operations that are still floating in the write buffer.
  3. Read a binary file - is the best way to play a file when you don't really like what type of file it.  In your case, you just want to get these read bytes and sent so they can be written down instead of destination.
  4. Write to a binary file - next to the destination, is what will store the bytes in the file that you created with the number 1.
  5. Size of the file get (under the range of the advanced features of file) - you need to know how big the file is, so you know when you are finished.

  OK, so once you are able to create files byte write and read bytes from existing files, you can move forward.

  I suggest the basic method is to have the user specify a source file on the source PC, and a folder on the destination computer.  Then find the size of the source file using the number 5.  Divide this number of size by the number of bytes that you want to transfer to the times.  The series pads are usually around 32 k (if I remember correctly) in order not to exceed that.  Now start to send data by reading a number of bytes and this string output wiring to the feature of writing VISAS.  On the side of destination, you will want to monitor the serial port for bytes and read when they arrive.  This string of yarn to the writing of the function of binary file to add them to your destination file.

  This is the basic outline of how to do it.  He needs to not to overload him write and read buffers on the serial ports.  Initially, you can use delays on the side sending to make sure that the side reading has enough time to digest.  To make things faster, you can bring in a control of flow.

  If all that sounds a little intimidating, there are there Alliance member companies (such as the automation of PrimeTest) who can write this code for you and even provides a turnkey for you solution.

  Happy wiring,

  Dan press

  Certified LabVIEW Architect

  PrimeTest Automation

• Get a file from the server

  Hello!
  Does anyone have an idea how to get a file
  from the Unix server in local Windows PC?
  
  The scenario is:
  In eBS, we have the user who performs a concurrent request
  which generates a file with FM
  
  The user needs this file to check the result of the simultaneous petition
  whenever he performs the request.
  
  The conditions are:
  1 - the user should not enter the user name and the password of the server manually
  2 - the competing generated request file varies whenever demand competing is made.
  
  How can we solve this whirlwind?
  Thanks in advance

  Jane,

  You can create a simultaneous host program for the file from the ftp server. For more details, please see (you can also search forum E-Business Suite to other threads):

  Program contributing to the FTP file
  Program contributing to the FTP file

  Need to download excel live without FTP application layer file
  Need to download excel live without FTP application layer file

  FTP from Unix to Windows machine file (Shell script) - inplemention in Apps
  FTP from Unix to Windows machine file (Shell script) - inplemention in Apps

  Download files without the use of FTP tools
  Download files without the use of FTP tools

  The Oracle Applications Developer's Guide
  http://download-UK.Oracle.com/docs/CD/B25516_14/current/Acrobat/115devg.PDF

  Kind regards
  Hussein

• Download the image file from the server

  Hi I want to download the image file of the server.

  When you download a file save dialogue comes. I don't want this dialog box.

  There will be a specific location where this file is saved.

  Can someone help me?

  Thank you

  CK

  You can not download the file without saving dialog file - it is a security restriction.

• How to open files from the list of contacts on the computer at home, the vcf files

  I exported my contacts list on my computer, it is a .vcf file.  I can open it by clicking on it, but only the first contact is displayed.  This screen looks like a file roledex.  but I don't know how to access other files.  I can open the file with "word" and "excel" vcf and all the data is there, but the result is not reader friendly.

  There is an additional program which allows opening these contacts in a friendly dispay?

  Thank you.

  Doug

  I believe you can do it through Windows live mail.  Alternatively, you can import it into your google account in a web browser.  The advantage to using Gmail, it's that once you make changes you can have them automatically sync them to your phone if you have Gmail on your Droid.

• How to transfer files from the PC (Vista) to the iMac computer?

  Pulling my hair out here.

  I'm trying to transfer the data from my PC to an iMac. I know that my ip address. I use an ethernet cable from the PC to the router with an other ethernet from the iMac to the router. The iMac cannot connect with my PC. I disabled the firewall and enabled the sharing of files.

  Any suggestions?

  Hello

  http://www.trainsignaltraining.com/share-files-between-Mac-and-PC/2009-05-12/

  .

  Jack MVP-networking. EZLAN.NET

• Sending a file from the server to the client

  Hello
  
  Inside of a table, I have a commandButton control which, by pressing on it, I call a method in a bean. Inside the method, I want to send a file that is located in the server in a path like C:\tmp\myfile.pdf to the customer. How can I do?
  
  Thank you
  Will do

  To do this, you use a fileDownloadActionListener you put on an existing button. Using the properties of the listener, you specify the content type of hat, a file name (not necessarily the actual file name), and a method in a bean that is called when the use clicks the button. In this method, you listen to the file (from your servers path) to the client.
  Check out my blog http://tompeez.wordpress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-adf-part-1/ (especially part 2 BOF a sample).

  Timo

• EOFException when downloading files from the server FTP of Bluetooth

  Hello, I am developing an application that downloads a file from a FTP of Bluetooth server. If I use this code to download a list of files works fine, but if I use the same code to download a real file it doesn't. I tried using plain text, image, video (mp4 and 3gp) and audio with the same result. If I install my app in a Nokia (N95) or a Motorola (K3) works perfectly, but I can't get it to work on my Blackberry 8310
  The problem in the BlackBerry is an EOFException when reading the first byte, no 1 is returned to indicate the end of the file, but an EOFException. BlackBerry Handheld Software (v4.2.2.173)

  This is the code to get the InputStream:

  public InputStream getFileInputStream(ClientSession conn, Operation op, String stFile, String stType) throws IOException {        InputStream inputStream = null;        byte[] FBUUID = {(byte) 0xF9, (byte) 0xEC, (byte) 0x7B, (byte) 0xC4, (byte) 0x95,                   (byte) 0x3C, (byte) 0x11, (byte) 0xD2, (byte) 0x98, (byte) 0x4E, (byte) 0x52, (byte) 0x54,                   (byte) 0x00, (byte) 0xDC, (byte) 0x9E, (byte) 0x09 };        String file = stFile;        String type = stType;        if (file==null) file="";        if (type==null) type="";        //Prepare the headers for the OBEX commands        HeaderSet header = conn.createHeaderSet();        header.setHeader(HeaderSet.TARGET, FBUUID);        //Send OBEX Connect        HeaderSet response = conn.connect(header);        //In order to go the desired folder the OBEX SETPATH command is beeing used        //Prepare the header for the SETPATH commad        header = conn.createHeaderSet();        //folder_name is set to the name of the desired folder        //if left blank the root folder will be used        String folder_name = "";        header.setHeader(HeaderSet.NAME, folder_name);        //Send the SETPATH command        HeaderSet result = conn.setPath(header, false, false);
  
          //Prepare the header for the GET command        header = conn.createHeaderSet();        header.setHeader(HeaderSet.NAME, file);        header.setHeader(HeaderSet.TYPE, type);        op = conn.get(header);        //The selected file will be send to the operation's input stream        inputStream = op.openInputStream();        return inputStream;    }
  

  And the call:

  InputStream in = getFileInputStream(conn, op, "text.txt", "text/plain");
  

  The same call that works perfectly for the list of files (in BlackBerry too):

  InputStream in = getFileInputStream(conn, op, "", "x-obex/folder-listing");
  

  This call produces an xml file which can be read perfectly by any phone.

  Any help is very appreciated!

  Concerning

  Solved. The problem is to use >-1 instead of ! =-1