How I can do to make an image "clickable"?

Similar Questions

• Can no longer make system image after Win 8.1 upgrade (error 0 x 80780119)

  I have recently upgraded to 8.1 and is now trying to make the image of the system.
  Unfortunately, it fails with the 80780119 error.

  [Backup image failed | http://www.sawyourad.com/toshiba/failed.png]

  I had happen before on another computer system and recovery partition resizing seems remedy and is what is suggested on the web.

  However, I can't seem to do it on this machine, diskmgmt.msc does not seem to show any disk space used and worse still, many of the scores seem to be duplicated

  [image of drive partitions | http://www.sawyourad.com/toshiba/diskmgmt.png]

  You will notice that none of the scores of recovery seem to have any space used.

  I am at a loss to know what to do next.
  The 8.1 update made pretty much my dangerous to use machine, because I can not save more.

  I hope I don't have to add Toshiba to my do not buy list.

  Anthony Wieser
  Wieser Software Ltd

  + The message was edited: link has been removed - unauthorized +.

  Hello

  > I hope I don't have to add Toshiba to my do not buy list.
  Is not a friend of the option. Why? Because it seems that it is a common problem of Windows as a lot of people have called for a solution in the Microsoft forums and community.

  [Backup fails error code 0 x 81000019 | http://social.technet.microsoft.com/Forums/windows/en-US/25deba76-464b-4a9d-9b32-a283bb6a88ce/windows-7-rc-backup-fails-errorcode-0x81000019?forum=w7itproperf]

  Someone solved this problem by clearing the check box of the image create driver available when you choose the backup content.

  But it looks like his mistake when hidden system reserved partition created by Windows system does not have enough space to store a cliché.
  Please check the freespace on this volume.

  Follow the following steps:
  1. start-> computer-> right click--> Manage
  2. Select storage-> disk management.
  3. check that you have a partition system reserved about 100 MB in size or more
  4. If so, right-click on the volume and select Properties.
  5 view the used and free space.

  Backup Windows requires around 40 MB of free space on that partition to save successfully.
  So if the free space is less than 40 GB, backup is not getting enough free space.
  To work around the problem, try the following:

  Since reserved by default system partition cannot be extended, creating a new system volume is the workaround. Here are the steps to move the system volume to any other volume:

  1. choose where you want to have your system volume.
  A few things you should keep in mind:
  a. system volume cannot be created on a primary partition to MBR disk.
  b. If the volume system & boot volume are assembled, then BitLocker feature can be used to encrypt the volumes on your machine.

  2 propose the creation of a new volume (say f) on the same disk that contains the size of about 490 MB boot partition (make sure to keep less than 500 MB).

  3. assuming that Windows is installed on C: on your machine. From an elevated command prompt run: bcdboot.exe C:\Windows /s F:/s.

  4 from high command prompt run: DISKPART

  5. starting at the disk part command prompt:
  DISKPART > select volume F
  DISKPART > active

  Now you can restart your machine and F: becomes the system volume.
  You can cancel it by repeating the same steps using the original system volume (you must assign drive letter) to return to your previous configuration.

• How I can levitate/Float of the images of cards to play

  Hello

  
  

  Some kind soul spirit which informed me as to how I can produce a picture, similar to the following, using Adobe Photoshop Touch (iPad): -.
  

  

  Are there special tools on Photoshop Touch that I should concentrate on? Is it really possible to get this type of effect floating / levitation with Photoshop Touch?
  
  The explanations or links to tutorials, thoughts and comments, would be greatly appreciated, because I can't understand how it's done.
  
  Thank you.

  
  -= Jazzdude =-

  Quick response: Compositing. (Yes. I don't know.)

  Longer answer: seriously, if it was me, I probably take a picture of each card in the stack and they accordingly after extraction and isolate each layer. (Check tutorials PS Touch as I think there is one in there any extract/selection of objects on a layer.) To get the perspective effect, you would have to take each stroke of each card from different angles. (for example, because the King is down, you would take a picture of the King in a way it's like you're almost hovering above him.) Ace, since it is at the top, almost would be level when taking the photo.) This will take time and patience and would be much easier if you had a configuration small studio with lighting consistent. (This would allow easier in composite if all your images have similar lighting.)

  One last thing: so that the image to be more convincing, I would add some more shading by combustion. None of the cards are casting shadows of each other.

  WE EDIT: I forgot to mention: the dimensions/size of your project in PS Touch will determine how many layers you will be able to work with. for example, a 4000 x 4000 pixels will give you max about 2 to 3 layers, so that a small project of 2000 x 2000 pixels will earn you more (maybe about 8 to 10). Keep this in mind because you will need about 6 layers or more.

• How can I automatically make an image fit into a drop zone

  I am a photographer and during the holidays, we do a LOT of cards.  I need a shortcut that will allow me to save a LOT of time.  I want to be able to drag a photo on a card template on the layer on a clipping mask (deposit for a photo area) and to make photo automatically climb aboard aboard in the window of drop zone like simple drag and drop do programs - instead of dragging the photo of the model, which actually get the clipping mask medium zoom here to find the edges of the photo, resize and drag to adjust.   I just want 1) select the layer I want to drag the photo on the card model and 2) press a button to make it fit in the clipping mask.  Can someone help me understand this.  Help.  Thank you.  Mark M

  Save the code as a text below the file with the .jsx extension and put it in the Photoshop subfolder: Presets\Scripts. You can create an action to run the script with an access key. Let down your image layer above the clipping mask layer and run the script.

  #target photoshop
  
  var oldPref = app.preferences.rulerUnits
  app.preferences.rulerUnits = Units.PIXELS;
  var doc = activeDocument;
  var iLayer = doc.activeLayer;
  
  layerDown ();
  
  var mLayerB = doc.activeLayer.bounds;
  doc.activeLayer = iLayer;
  var scale = Math.max((mLayerB[2]-mLayerB[0])/(iLayer.bounds[2]-iLayer.bounds[0]),(mLayerB[3]-mLayerB[1])/(iLayer.bounds[3]-iLayer.bounds[1]));
  iLayer.resize (scale*100,scale*100);
  iLayer.translate((mLayerB[0]+mLayerB[2])/2-(iLayer.bounds[0]+iLayer.bounds[2])/2,(mLayerB[1]+mLayerB[3])/2-(iLayer.bounds[1]+iLayer.bounds[3])/2);
  
  clip ();
  
  function clip(){
      var idGrpL = charIDToTypeID( "GrpL" );
          var desc7 = new ActionDescriptor();
          var idnull = charIDToTypeID( "null" );
              var ref6 = new ActionReference();
              var idLyr = charIDToTypeID( "Lyr " );
              var idOrdn = charIDToTypeID( "Ordn" );
              var idTrgt = charIDToTypeID( "Trgt" );
              ref6.putEnumerated( idLyr, idOrdn, idTrgt );
          desc7.putReference( idnull, ref6 );
      executeAction( idGrpL, desc7, DialogModes.NO );
      };
  
  function layerDown(){
      var idslct = charIDToTypeID( "slct" );
          var desc2 = new ActionDescriptor();
          var idnull = charIDToTypeID( "null" );
              var ref1 = new ActionReference();
              var idLyr = charIDToTypeID( "Lyr " );
              var idOrdn = charIDToTypeID( "Ordn" );
              var idBckw = charIDToTypeID( "Bckw" );
              ref1.putEnumerated( idLyr, idOrdn, idBckw );
          desc2.putReference( idnull, ref1 );
          var idMkVs = charIDToTypeID( "MkVs" );
          desc2.putBoolean( idMkVs, false );
          var idLyrI = charIDToTypeID( "LyrI" );
              var list1 = new ActionList();
              list1.putInteger( 3 );
          desc2.putList( idLyrI, list1 );
      executeAction( idslct, desc2, DialogModes.NO );
      };
  

• How to save a file as an image clickable

  I am new to Flash (CS5.5) but have somewhat self-taught. I created a template simple "slide show" of images that fade in and out to other images - it's a holiday greeting card. How can I save/export/publish (not sure of the correct terminology) this .fla file so that my end result is an image that I can insert (image) in an e-mail (outlook) and send. The recipient must be able to click on the image and activate the movie. I have searced for hours on the web and that you have not found the answer.

  Sorry, but you drive a Fiat and order by the dealer of Indian Motorcycle to ask for help. (in other words, this forum is not for help with Flash.)

  Click on the link below and read the documents at the top of the page in red. There is a link that you must follow from there you will get if all goes well in the right place to find help.

  Click here to see

  Good luck! Rick

• is it possible to tell me how I can make program in labview that take black and with image pixels and give the coordinates of black or white pixels again to me.

  Hello everyone

  is it possible to tell me how I can make program in labview that take black and with image pixels and give the coordinates of black or white pixels again to me.

  It depends on the image and the module LabVIEW available to you. LabVIEW can open bitmap and png files and convert them into tables: if it's really a monochromatic (depth of 1 bit) you get a table 2D boolean, T for white, F for black. Just look at the index of the item to its details (don't forget that LabVIEW does not use the order of rows and columns, so you must transpose and reflect the table). If you have a 24 bit bitmap, the table will contain the color in hexadecimal synthesis (000000 for black, FFFFFF is white and so on); Yet once, you simply check if the element of the array correspond to your requirements and get its index.

  With the vision that you module con open other pictures and perform advanced on them without convert them into tables. Anyway, you can just type the extension of your image using LabVIEW and see what you get.

  Here is a code snippet to open a monochromatic image

  

• How can I make an image backup of my laptop which will save time on a fresh installation of system

  How can I make an image backup of my laptop which will save time on a fresh installation of system

  You will probably need to go to 3rd party programs.  Two products that are frequently mentioned in these groups are Norton Ghost and Acronis True Image.
  I have no personal experience with either.

  HTH,
  JW

• How can I make the image that is within the rectangle to move?

  Hi, I'm doing a Web page with muse and I found the Coffee pastries Katie page. There are some pictures in the home pages this movement inside the form when I scroll the page. Could someone please tell me that how can I make the image that is within the rectangle to move?  Thank you very much

  You can apply the scroll to fill the picture or the rectangle itself if you are referring to scrolling rectangle on the page.

  https://helpx.Adobe.com/Muse/using/scroll-effects.html

  https://helpx.Adobe.com/Muse/how-to/explore-new-scroll-effects.html

  https://helpx.Adobe.com/Muse/using/applying-scroll-effects-browser-fills.html

  Thank you

  Sanjit

• How can I make background images (in classes < p >) appear as PDF review?

  RoboHelp HTML 11.0.4.291.

  I have in my stylesheet, < p > classes of notes, tips, examples and warnings. Each has a background image.

  p.Note {}

  background-image: url (insurance);

  background-repeat: No-Repeat;

  background-position: 0pt 12pt;

  margin left: 12pt;

  border-left-style: none;

  border-right-style: none;

  border-top-style: none;

  border-bottom-style: none;

  padding-left: 40px;

  padding-top: 20px;

  padding-bottom: 20px;

  }

  The images show the outputs but not in the previews, or review PDF files (review |) Create PDFS for review...).

  Is there a way to make these images appear?

  There's no way I know. You have the same problem with paper records. The background image do not appear there either. Please log a bug with Adobe report: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38

• I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. How to synchronize or import/export files(images/music)?  Fact is need to update itunes? Also you can sync ipod touch?

  I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. How to synchronize or import/export files(images/music)?  Fact is need to update itunes? Also you can sync ipod touch?

  iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher.  Update of the system only checks the updates for the current version of the system you run, but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. If she can run 10.8.5 or higher, you can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM.  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

  Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• How to make still image from a movie in movie maker

  I have windows 7, and windows movie maker, I want to make still images from a movie I did with windows movie maker.  I can't understand how do it, can someone help me? Thank you

  Support is in the Movie Maker Forums:
  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?TM=1349183784260

• How to make transparent images in Photoshop

  Hi all...

  I stuck somewhere and I need transparent Image.

  I want to know the procedure how to make transparent images in Photoshop.

  Help, please.

  Thanks in advance

  Remove the background you can see the checkerboard, and save them in a file PNG or GIF.

  This page will tell you how to select the area you want to keep

  https://helpx.Adobe.com/Photoshop/using/making-selections.html

• How can I convert a negative image of the film a positive image in Lightroom 6?

  I've seen a number of online tutorials that explains how you can reverse/return line in the Module development of tone curve by dragging either end of the line, top / bottom for converting a negative to a positive image. This however does not seem possible in LR 6?  So, how are you? (My scanner is able to produce positives TIFF or JPEG of the film I've been scanning, but I would have preferred to edit pictures using Raw DNG files that it produces, which are negative).

  You must click on the small icon in the lower right curved panel to make editing possible.

  If it comes to color film, I don't know how good a conversion that would be, it will certainly color adjustments, because of the orange mask in the negative.

  And a scanner DNG files? I doubt that they will be real raw files...

  You can scan an image tiff with all the cliches and to highlight the present details, and that will be as good as any raw file.

• How can I layer of graphic images in a topic?

  Need to layer an arrow on a screenshot so that when the user clicks on a word in the descriptive text in the heading, an arrow appears on the top of the image capture to point to a particular area of the screen image? Anyone know how I can do this? I use the WYSWYG editor in Robohelp. Thanks in advance for any help you can provide!

  Hi Tracy to horse and welcome to our community

  Here's how you would do. First, insert two different positioned text boxes on the slide. Then insert your image in one and the image of the arrow inside the other.

  Now select the text as your user to click to show or hide the image of the arrow. Click the DHTML menu and choose "trigger to do." After that, you will notice a strange small icon that appears on the screen, close the selected text. Click on this icon and drag it until the arrow is surrounding and pointing to the image of the arrow. When you release, you should be presented with a context menu. Choose show/hide.

  Notes:
  * You will probably want to turn off borders for the positioned text boxes.
  * It is better to make the transparent areas of the positioned text boxes inside.
  * You will probably want to apply some inline formatting so that the clickable text that shows and hides the image seems to be a link.

  See you soon... Rick

• How can you save the background image contained in a Thunderbird e-mail message

  How can you save the background image contained in a Thunderbird e-mail message

  Have you read the instructions which preceded the right click? What of their suite?