How I support windows vista on cd to reinstall it on my other computer that wont start up. He's wiped and there is no recovery disk.

? How I support windows vista on cd to reinstall it on my other computer that wont start up. He's wiped and there is no recovery disk.  It also has stickers with license numbers.

Advertisement

Hello

There is no download free and legal Internet for vista

Here are the different ways to reinstall vista

Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

they do it for a nominal cost of $

also ask them if you have a recovery partition on your hard drive to get back to the way you bought

you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

Ask them of the exact key sequence

or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

they contain all versions of vista

This is the product key that determines which version of vista is installed

http://www.theeldergeek.com/Vista/vista_clean_installation.html

How to replace Microsoft software or hardware, order service packs and replace product manuals

http://support.Microsoft.com/kb/326246

Tags: Windows

Similar Questions

  • My says Windows Vista update, phase 3/3, do not turn your computer, that hard thing 24 hours, I can't start menu, I can't go down the screen of Windows Vista update

    I have a laptop, ran a software antivirus and then he says to Windows Vista is to install the updates, phase 1 of 3, then 2/3, then he is stuck on the phase 3/3 for 24 hours, if I turn the computer market and unplug it and try to turn back still evokes the same screen. very frustrated.

    Hello

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the drive that you have just made

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  • I have windows Vista Sp2. Cannot get into the BIOS. Computer does not start on the desktop. What can I do?

    Have Windows Vista SP2.  Switch on computer will go not on the desktop.  Tried to get into the BIOS, but get a blank screen.

    Someone at - it ideas. Thank you.

    Have Windows Vista SP2.  Switch on computer will go not on the desktop.  Tried to get into the BIOS, but get a blank screen.

    Someone at - it ideas. Thank you.

    Don't ned to start the Office before accessing the BIOS...

    The following tutorial is about changing the bios boot sequence.
    #1 step is how to get to the BIOS window. THIS show be what you need. You can skip the rest if they do not apply to you.
    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  • How to activate windows vista

    my computer several times in the installation with the same software and still active application,

    Previously, he was never in question, when my computer yet again

    How to activate Windows 7 or Vista manually (activate by phone)
    1) click Start and in the search for box type: slui.exe 4
    (2) press the ENTER"" key.
    (3) select your "country" in the list.
    (4) choose the option "activate phone".
    (5) stay on the phone and waiting for someone to help you with activation.

    Also:
    How to activate Windows Vista by phone
    http://support.Microsoft.com/kb/940315
    http://www.mydigitallife.info/2008/10/13/how-to-activate-Windows-Vista-by-phone-activation/

    Microsoft Activation centers worldwide telephone numbers:
    http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
    (This site is for activating Volume License, but if you call, they will help you)

    Product Activation Solution Center
    http://support.Microsoft.com/contactus/cu_sc_prodact_master

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • How to manage Windows Vista power management features

    Hi guys

    I searched a bit in the technical knowledge of the Toshiba and found a very interesting article on Windows Vista power management features.

    * [How to manage Windows Vista power management features | http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm] *.

    The fact is that you will not find one tool of Toshiba Power Saver on Vista as on Windows XP laptops and the parameters energy saver is a bit hidden in Vista power saving settings.

    But you can also control some options as a method of cooling or power saving Mode.

    I think that it could be interesting for some people here in the forum!

    Greetings to all!

    Thanks JayJay.

  • Satellite A105-S4284 does support Windows Vista?

    A105-S4284 does support windows vista? or the drivers are not yet ready? Is vista capable PC, I know, but several times I tried to install vista RC1 and it hangs up in the middle of the installation:(s'il vous plaît aidez_moi.)

    Thank you

    If it s a laptop capable of vista then I see no reason why the laptop doesn't have to support Windows Vista.
    It of a fact that, this time no Vista drivers are available on the Toshiba page. (I put t found any)
    I guess we will be able to download the drivers in the next few weeks.

    PS: I installed the RC2 release of my camera and it works without any additional driver. Only the wifi card does not work, but I can live with them

  • I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.

    I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.   I had to replace the hard drive, so he has nothing about it and I added more ram, but I replace the cd player so it is not yet installed on the HP.   So I was wondering if I could put the installation disc in my laptop cd/dvd and connect computers by usb ports and install it this way and if not how can I?

    Thank you

    Hello

    You are welcome

    If the CD/DVD drive in the works of PC Gateway, you can (at least temporarily) remove it and install it in the HP, you can run your recovery disc and reinstall Vista.  Once everything is running on the HP, you can always remove the CD/DVD drive and reinstall it in the gateway PC if you wish.

    Kind regards

    DP - K

  • How to uninstall windows vista or reformat the c drive

    How to uninstall windows vista or reformat the c drive?

    Hello

    You do not uninstall Vista as such.

    Vista cannot uninstall itself by Vista, formatting the drive that is installed on. In other words it cannot remove itself.

    You install another operating system, removal of Vista during the installation process of the other operating system...

    You don't say exactly what you are trying to do.

    You can format a disk if it a second drive with the Dual Boot operating systems and leaves without data or the operating system on it at all.

    We need more information.

    See you soon.

  • How to integrate windows vista with service pack 2? I need to run an inplace upgrade.

    How to integrate windows vista with service pack 2? I need to run an inplace upgrade. I have a corrupt installation of SP 2 and I can't uninstall SP 2 I have been informed that the only way to do an inplace upgrade is with a sp2 disk unfortunately I do not have a disc of vista SP 2. can someone give me a complementary statement?

    Hello

    1. what happens when you try to uninstall service pack 2?

    2. do you get an error message?

    I suggest you to see this link on how to uninstall service pack 2 for Windows vista:

    http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

    Check if that helps.

  • What is slipstreming and how to integrate windows vista sp1?

    "slipstreaming".

    What is slipstreming and how to integrate windows vista sp1?

    Hello

    If you don't know what slipstreaminmg is, there is some learning to do

    read this;

    http://en.wikipedia.org/wiki/Slipstream _(computing)

    How to create a Slipstream SP1 Vista DVD Installation

    http://www.Vistax64.com/tutorials/151606-Vista-SP1-slipstream-installation-DVD.html

     
     
  • How to make windows vista updates Pack 2 cost?

    How to make windows vista updates Pack 2 cost?

    Hello Victorchow,

    If you are referring to the update of Windows Vista service pack 2, then the answer is free. It should have automatically downloaded to your PC via Windows updates.

    You can download it from this link: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3&displaylang=en

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • Adding an SSD as a boot drive - how to install Windows Vista Start

    To speed up my new e9105z, I bought a new 80 GB Intel X - 25 M to reduce disk latency and complete the 640GO HARD drive came with my computer.

    Drive has been installed successfully, recognized by the PC and formatted with the Windows Vista Disk Manager tool.  When I use the BIOS tool to set the Intel SSD as my boot drive, it says that some files of startup is missing, and I come to on the HARD disk as the startup disk.

    Bottom line: how to install Windows Vista on the SSD and configure it to start?  Did I lose my classic HDD data in the process?

    Thank you

    millergd

    millergd wrote:

    Here is where I am/measures taken.  HP of course makes this difficult process:

    (1) used the CD Creator to make a backup.  (Note that the CD - R does not work with the e9105z software.  Do only DVD-R).  (I tried the system HARD disk recovery image.  He simply reinstalled itself on the HARD disk.)

    (2) the value of Vista installed on the SSD via backup DVDs.  System starts beautifully with SSD.  Hooray! I was about to declare mission accomplished, then...

    (3) Reconnected my HDD SATA cable, she failed to be the startup disk.

    (4) I used disk management to reformat the HARD drive to erase its boot sector.  It is always default to the HARD disk, which is more a Vista on it.  Now, I must go into the BIOS and choose the Intel SSD as boot drive whenever I turn on manually.

    Any idea on what needs to be done to configure the BIOS to finally settle the SSD as my boot drive?  The backup system image is still on the old hard drive.  Could that be throwing?

    The SSD speed is great, but the 6 + hours spent on Vista reinstall, reinstall and reinstall throughout this trial and error process made a royal PITA to do.  It seems that HP didn't consider that whether by adding a second drive that is bootable.

    Thank you

    millergd

    You should be able to select the startup disk in the BIOS.  Restoring image shouldn't be a factor.  If the BIOS settings do not work, I would swap the connectors between the readers.

    Good luck

  • Try to install LR6 but says it is not support windows vista. I have windows 7.

    I install LR6. After entering the serial number it won't allow me to install it says doen't support Windows Vista.  I have Windows 7.

    Change the compatibility mode of Windows 7 configuration file and run the Setup file and check.

    Right-click on the Setup file and select Properties option.

    Then click on the Compatibility tab.

    The value of the Windows 7 operating system and check.

    ~ Mohit

  • CC of Dreamweaver not supporting Windows Vista but Photoshop CC's?

    Adobe Dreamweaver CC does not support Windows Vista, where, as Adobe Photoshop CC's? I mean, should not support the same thing? Is it because of the build type or something? But what really bothers me. Please let me know if there is a different version of Adobe Deamweaver that I can download, which supports Windows Vista too. Thank you.

    -Murtaza

    Hey Murtaza,

    Applications of CC are tested on Windows 7 and later. Please take a look at the links below for the CC, CC DW and PS CC tech specs.

    http://www.Adobe.com/in/products/creativecloud/tech-specs.html

    http://www.Adobe.com/in/products/Photoshop/tech-specs.html

    http://www.Adobe.com/in/products/Dreamweaver/tech-specs.html

    Thank you

    VIANEY Gupta

  • Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

    No Option to install repair - SAD

    Hello

    Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

    I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

    As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

    Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

    -Todd w.

    "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

    «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

    As Todd, is the answer.

    "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

    Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

    "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

    It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

    If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

    Another possible place you could make suggestions which could see the developers would be:

    https://connect.Microsoft.com/default.aspx

    Brent
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for