How is it that when I add links in my Index.html file that would damage the design?

Similar Questions

• Index.html file missing when I download Iweb site to go Daddy

  So, I built a website using Iweb.

  I downloaded on Godaddy using Fetch.

  The files are all there in the correct folder, but the site does not open.

  When the support of Go Daddy looked at the files, they said that the problem is the index.html file is missing.

  It is a compressed, file index.html.gz, but they are not familiar with it and this isn't in the right format to use.

  If someone else has had this problem and you know the solution? I tried to launch my site for 48 hours now.

  Support said that everything seems to be fine.

  Thank you

  It all depends on how you have downloaded from the site?

  Have you downloaded your site folder or just the contents of the folder of your site?  If you have downloaded the site folder, then you need 2 files to index - an index.html file will be inside the site folder and the other will be sitting outside pointing in.

  If you have just downloaded the content in your folder Public_html on GoDaddy, then you need an index.html file and that it is.

  Don't know how you got index.html.gz.  What you need is one or two files index.html and that's all.

  Republish your site new to iWeb to a local folder and check the files that have been produced and if the index.html file is there.  It should be, but there should be no zipped or other, just one or two files with index.html.

  They must be there.

  This is the first site you've built?  If so, why choose iWeb?  Not sure that this is an unsupported product that has not been updated for at least 6 years now?

  Remember to move on and using supported software.

• When I export my bookmarks to an html file, I get a file json instead. How to make a html file that I can import into safari?

  When I export my bookmarks as an html file, I get a file json instead. How to make a html file that I can import into Safari?

  Use bookmarks > organize bookmarks > import and backup > export HTML and make sure that you give the file an extension of .html file.

  See also:

  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
  • http://KB.mozillazine.org/Export_bookmarks

• first excuse my bad English... I have bouth element 12 but I must reinstal it because my pc have been reset. How to do that where is the element of the 12 file?

  first excuse my bad English... I have bouth element 12 but I must reinstal it because my pc have been reset. How to do that where is the element of the 12 file?

  Hi Suzanne,.

  You can download the installer again.

  Since your Adobe account, you can also retrieve your product key.

  You are allowed to two "activation" at the same time, for example for a desktop and laptop.

  View products download Photoshop Elements | 10, 11, 12, 13

  It could be useful!

  Rayyan

• Is it possible to put a password that would prevent the program turn accidentally closed?

  We have a person in our laboratory which is spirit very scatter. Several times he wanted to reduce Labview program running, but doesn't actually not paid attention and accidentally closed it by clicking X instead of _, thus negating the whole experience. When the program was closed he didn't ask if he wanted to save or if he didn't know that he wanted to close it. Is it possible to put a password that would prevent the program turn accidentally closed?

  You have two options.

  1. You can hide the X in total in the properties of VI.  Go to the appearance of the window, click Customize, and then uncheck the option to allow the user to close the window.  You would need another method, for example a file-> Quit or exit option button.
  2. If you use a version higher than the Base, you can use a structure of the event to capture the narrow window? event.  This will allow you to ask the user to confirm to get out and do something else required.  If the user cancels, or you need to cancel, you have the abaility to cancel the event.

• When we try to write in a pdf file. document, it changes the Danish letters Æ Ø Å to different signs. To do this, this om pc and Mac. Anyone know of a solution? Thank you

  When we try to write in a pdf file. document, it changes the Danish letters Æ Ø Å to different signs. To do this, this om pc and Mac. Anyone know of a solution? Thank you

  Hi, I found the problem, it seems that the pdf file uses a helvetica font, and when we write in a part of the PDF with the Danish letters A, Æ, O, it changes signs. I changed the Roman fonts in adobe acrobat pro, and then there's no problem. But he seem´s that the standard in pdf files is helvetica, and there is not time to change the files, because we get only the files on the day of the exams at school. It happens in all versions of adobe 11 and DC, it is also a problem on Windows 7, 8.1 and windows 10 more Macbook.

  Kind regards

  Med Hotel hilsen

  Price Patrick Simon

  TI-Vejleder

  Langeskov Skole

  Ronningevej 38

  Langeskov 5550

  Denmark

  FRA: meenakshin83966505 [email protected]<>[email protected]>

  SVAR til: "[email protected]<>[email protected]> ' [email protected]<>[email protected]>" "

  Dato: måndag den 18. January 2016 kl. 14.39

  Til: Simon Price [email protected]<>[email protected]>

  Emne: You have been mentioned by meenakshin83966505 in Re: when we try to write in a pdf file. document, it changes the Danish letters Æ Ø Å to different signs. To do this, this om pc and Mac. Anyone know of a solution? Thanks to the Adobe community

  You talked

  by meenakshin83966505https://forums.adobe.com/people/meenakshin83966505?et=notification.mention> in Re: when we try to write in a pdf file. document, it changes the Danish letters Æ Ø Å to different signs. To do this, this om pc and Mac. Anyone know of a solution? Thanks to Adobe Community - see the reference from meenakshin83966505 to youhttps://forums.adobe.com/message/8402116?et=notification.mention#8402116>

• How can I delete the index.html file automatically added my domain homepage?

  I noticed recently that muse adds index.html to my homepage. I want to remove it and revert back to the way it was. This is the 2nd site with that I have this problem

  Hello

  I'm afraid, it's default system process and it is not possible to change the file name for the first page created in Adobe Muse of index.html at home or any other file name.

  You can also refer to some articles about why it is important to have the index.html page in your site: what is the index.HTML Page - default Web Pages , the Homepage - Wikipedia, the free encyclopedia

• The pencil of Apple requires a port light to recharge.  Does anyone know a USB male to female adapter port lighteners that would load the pencil on one device other than the iPad?

  The pencil of Apple requires a port light to recharge.  Does anyone know a USB male to female adapter port lighteners that would load the pencil on one device other than the iPad?

  Apple pencil comes with its own map of woman to woman, so you can use a standard lightning cable USb and charger to charge

  Not sure there is no 3rd party yet.

• A protocol that would provide the service for IPv4 and IPv6 traffic? (RIPv1, RIPv2, RIPng, BGP)

  A protocol that would provide the service for IPv4 and IPv6 traffic?

  • RIPv1
  • RIPv2
  • RIPng
  • BGP

  Hi SandeepTandel,

  ·         Your computer is on a domain network?

  ·         What exactly is the question do you face?

  Here the following protocols provide for IPv4 and IPv6 traffic or respectively:

  Ø Bng supports IPv4 and IPv6 protocols

  Ø RIPng supports IPv6

  Ø RIPv1 and RIPv2 supports IPv4

  Let us know if this information useful.

• I just paid almost $10 to create a PDF from a jpg file, but I did it so that I can change it. Now I find that I needed another Adobe package that would create the pdf AND I would change it. What should I do now?

  I just paid almost $10 to create a PDF from a jpg file, but I did it so that I can change it. Now I find that I needed another Adobe package that would create the pdf AND I would change it. What should I do now?

  If you create a PDF file from an image, it is always a picture, and you cannot change it.

  If the image contains text, then you need to perform the text recognition (OCR) before you can actually change the text.  Acrobat can do that.

• Is the application of the only edition that comes with the designer just cloud for the publication of apple or can I post on apple and android?

  Is the application of the only edition that comes with the designer just cloud for the publication of apple or can I post on apple and android? I see only information on living apple.

  iPad only.

• When I add my dLink surveillance camera media, files avi land always in the place of the consumer audio video area. Why and how can I get them to land as Visual?

  I'm trying to change some of the footage taken by our camera dLink bit when we're not home, but when I import .avi files, it will always just for audio (from first 11 elements), and nothing shows that the video. What I am doing wrong? Be aware, I am completely new to this program, because I bought to play with my camera dLink home videos and have not been able to do one thing with them as of yet due to how they import. I did 'get media' my camera Bloggie to see if it worked and he met as a video and audio only, so I do not know why the other does not.

  loriflori

  Thanks for the replies.

  Just to start my day and am very happy that you found your own answer by going in a different format for your camera.

  You recorded video compression AVCHD (MPEG4 AVC/h.264) equipped with a .avi cape. That AVCHD.avi is not compatible

  with Premiere Elements. Many previous reports on this situation.

  There is opportunity for you to make an AVCHD.mp4, instead of AVCHD.avi, in the camera settings? It should work with your MPEG4.mp4.

  When you go to read this MPEG4.mp4 (with the logo instead of the first frame of the video), you get a read full video and

  audio. If so, what is the current defined for the file is opened with. Change that can change the thumbnail representation of the hard drive. But let's see if

  There is a set of AVCHD.mp4 for recording of the camera.

  Looking forward to your results.

  Thank you.

  RTA

• How to prevent scrolling when you add a new row of datagrid?

  When I addItem to the minion of dataprovider to a datagrid, the datagrid control scrolls automatically to the new line added. Can someone tell me how to prevent scrolling happening, in other words, how to focus on the current line without scrolling of new line. Thank you.

  I didn't know that this was the default behavior.  Anyway, you can save the

  verticalScrollPosition and restore it later.

• How to make that pixelated to the color gradient effect

  I work with a project of pixel and I love how this chart looks like. The quality is horrible and I wish I could find the original HD, I'd be more than happy to pay for it. Unfortunately, I can't.

  Also, in my position, it would be more logical to actually learn to do this with Illustrator so that I can make variations for different projects.

  I tried to play with the function 'create photo mosaic' and he me 60% of my goal. I'd create a rectangle with a gradient, then would have raster and create photo mosaic.

  Unfortunately things seem too perfect. Colors are perfectly aligned and nothing doesn't come off or "explodes" the average pole.

  

  Advice on the creation of exactly this from scratch in Illustrator?

  Open to pay for a detailed explanation

  Thank you!

  0 choose a cell format. In this example, I used a cell size of 12 pixels. In Photoshop, create a file that is a multiple of this size of cell (e.g. 792 x 192).

  

  1. create a gradient

  

  2. add some noise if you wish, for a color variation

  

  3 filter > Pixelate > mosaic. Use the size of the cell that you chose in step 0. Make a note of the number of cells horizontally and vertically.

  

  4. save the image. In Illustrator, place the image and add it. Select object > create object mosaic. Enter the number of cells horizontal and vertical in step 3.

  

  5 separate the grid of cells. Use the object > path > offset of getting 1 pixel cells (or even if you want). Cut to the Clipboard and delete the rest. Then glue in place.

  

  6 remove cells to taste.

  

  More noise around the steps 2 and 3 would probably have worked.

• I bought adobe first unique cc 2014 app pro and I have received the order confirmation number. So how much time that I received the serial number?

  First of all, I have download adobe first cc pro 2014 creative cloud app, then I purchesed TI than simple app on adobe. So I got in my email order confirmation already number.  How long that I received the serial number?

  Hello

  In the creative cloud subscription you do not require a serial number because it works with you email id you used to sign up for it. Download CC down the link and sign in with your Adobe id and password in once you get quickly to do so.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Enable and disable Adobe products

  Once installed, go to download and APPS section desire or products.

  Vinay