Older A1138 Office do not restart after software update?

Similar Questions

• iPad will not restart after the update iOS9.3. Should force us the reboot?

  iPad will not restart after the update iOS9.3. Should force us the reboot?

  By restart do you average will not turn on?

  There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

  Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

  You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

  http://support.Apple.com/kb/HT1414

• Satellite L40 (PSL48E) - is not restart after BIOS update

  Hello

  My problem is that I have updated the BIOS and after that the machine does not restart. (Corrupt BIOS?)

  After that the BIOS updated (Satellite L40 PSL48E), reboot the machine and with the F2 key, I open the BIOS setup.
  I check the version of the BIOS (5.50) and complete the configuration of the BIOS. The machine must restart now...
  Not at all, the machine does not restart. No screen only the powerled lights.

  I can to fix it on my own as a BIOS reset?

  Thank you for the cooperation.

  It's strange because after that the updated BIOS update you can go into the BIOS.

  However, try to remove the battery and the AC adapter. Wait one hour and then put the battery back in and connect the AC adapter. Try again.

  If it doesn't work it is something wrong with the hardware or BIOS and must be checked by a technician for laptop.

• Smartphones blackBerry 9360 - internet not working after software update

  All, morning

  My 9360 updated to the last OS bundle (update of low priority, but I thought I'd run it in any case) and now the internet does not work - facebook and Twitter will not let me open a session by saying that my data plan does not support the application, BBM does not work and emails are is more in sync with my gmail Inbox.

  I'm on a monthly contract to pay with Virgin UK.

  Any advice?

  Thank you!

  Jen

  Hello and welcome to the community!

  After an update as well as if things get wobbly, I always offer the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then you should contact your mobile provider for formal support.

  Good luck!

• Qosmio X 70-A-12N: BR-Player does not work after software update

  Hi guys

  Tried to watch the Hobbit Blue Ray tonight (the first time after the software update) the sound is fine but the picture is just a flashing green screen. Tried a new BlueRay just in case that was the record, but no, it wasn't the same.

  Any ideas of the question or the solution?

  Apart from the use of software preinstalled Toshiba Blu - ray, you can also try to play blu - ray discs using 3rd party software, like for example the VLC Player.
  Its freeware and tool in my opinion one of the best freeware players available on the market

• Computer does not restart after the update

  Description of the problem: I am unable to restart my laptop after receiving the update of microsoft onSaturday.  I have a gateway MT6707.

  I got the following error. "Unable to start Windows.  A recent hardware or software change might be the cause.

  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, choose start windows normally. »

  Start the reboot system (recommended)
  Start Normal Windows

  No matter which option I choose, the system attempts to restart and takes me right back to this screen above information.

  No other changes have been made to the other than the update.

  Please let me know how to proceed.
  Operating system: Windows Vista

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• system does not restart after the update?

  I downloaded an update to microsoft web view for my windows XP home Edition... it's KB9955759

  "After you download was finished, then I tried to restart my computer as it has been restarted I tried to say, log in under my user name, then a pop box brought up something like" windows cannot load the locally stored profile. Rights of possible insufficinet?

  I can't connect in safe mode but not in normal mode?

  any suggestions

  John

  If you start in Mode safe mode, uninstall KB955759 & reboot, the behavior persists?

  Despite what http://support.microsoft.com/kb/955759 suggests, KB955759 isn't a critical security update. After you have uninstalled KB955759, you can use the difficulty here to achieve the same ends, if you wish: http://support.microsoft.com/kb/954157 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• Windows will not restart after running updates.

  The last 2 times I ran the updates my computer will not re-start automatically.  Blue screen appears with the message indicating that Windows has been arrested to avoid damaging the computer.  If the first time screen seemed to shut down and restart.  Then a message says that if a software or a hardware had been recently installed must be removed. Why Microsoft Webcam has been reinstalled during execution of updates that I don't know.  Running updates the problem or software for this webcam?

  The last 2 times I ran the updates my computer will not re-start automatically.  Blue screen appears with the message indicating that Windows has been arrested to avoid damaging the computer.  If the first time screen seemed to shut down and restart.  Then a message says that if a software or a hardware had been recently installed must be removed. Why Microsoft Webcam has been reinstalled during execution of updates that I don't know.  Running updates the problem or software for this webcam?

  Hey RetREMF

  We cannot say what update is the cause of the problem

  one thing that you should never get 3rd party drivers from windows update hardware

  Find them directly in the hardware manufacturer's Web site

  I suggest that change you how to receive updates to try to find the exact problem, we by installing one at a time

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need or who have limited access to Internet

  Walter, the time zone traveller

• New passport Passport brand blackBerry will not restart after the update - flashing led Red

  Help...

  Unboxed, updated (sim card not yet in)-restarted

  Black screen, won't do anything outside flash its LED.  Sequence is flash, pause, six fast flashes, long break and start over again once.

  Have you tried dialing 30 days of free support, but guess what, you can get no further than to hear the options.

  At the present time - not feeling the love... (RANT ON)

  Hi Wolf, strangely enough, shortly after my post the BlackBerry support number worked, and the nice man on the end of the line follow the same procedure as you suggest. Everything now fine and dandy! Thanks for your comments

• Contacts from blackBerry Smartphones does not work after software update

  Anyone else having problems with their Contacts button? I installed the updated software version yesterday morning and now whenever I click on Contacts, I get a message saying that "Unfortunately, has stopped Contacts" and the only option I had was to report this to crash the first time; now, I can only choose "OK". I tried to restart my phone, but it did make a difference.

  He worked before that, I only left a micro-SIM with my Z10 to a nano-SIM for the Priv Monday night (4th) and started using it yesterday (5th) whole and I me join and links contacts before this happened.

  Any help would be appreciated.

  sdgardne wrote:
  Since you are now in the hands of a formal technical support, we will be back here. But the volunteers here will of course be very grateful for your report of your final results.

  See you soon!

  Hi everyone, just a quick update: it turns out that it's a problem/bug BlackBerry already know and are trying to solve. There was an update from 01/09/16 for the Contacts app, but it doesn't seem to work when I installed the update. Workaround that I was advised to use in the meantime is as follows:

  • Deselect auto-updated option on Play store -in the game store, tap 3 horizontal lines in the 'search' box to set up your account > settings > auto-update apps > not auto-implementation update app

  • Contacts to revert to the version of factory default - settings > Apps > select Contacts and then:

  1. Click on clear Cache
  2. Press Force
  3. Press on uninstall updates
  4. Press OK when you are prompted to do so

• Apple ID does not work after software update

  upgrade my iPhone to iOS 9.3 and my Apple ID does not work and I can't activate the phone... I'm the only person who has used this phone... not a second by hand, it please help

  and stop assuming that all users who have this problem aren't the first users

  What happens when you try to use the Apple ID, so you think not the right pair?

• Software does not work after software update to latest El Capitan

  Hi, is it possible to go back to the 1st version of El Capitan.

  I bought a software presenter and also a new iMac. It was working fine until there was an update of the OS software and now software presenter can open more.

  What version of El Capitan you're updating since then and what presentation software you are using and what version?

• BlackBerry Smartphones appworld does not work after software update

  It does nothing when I click on the icon of the appworld, Ive has deleted the appworld in application management, reboot my device and install again. And still will not work. I did it several times and the appworld icon still does not work. Pls help. I recently updated my OS5 OS6 at 9300.
  Thank you!

  Hello yhayen03

  Please refer to your other post http://supportforums.blackberry.com/t5/BlackBerry-World/App-World-does-not-open/td-p/1782151/page/2

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...