How much should I sell my iPod 5g for it's a 32 GB no scratches in the hopes of getting $ 320

Similar Questions

• How much should great chocolate cost?

  OK, so this isn't a Friday and this isn't a question of Eloqua but I need help. I have 19 days left in my MBA program, and one of the last pieces I need to fill is an analysis of prices for our products. How much should a 0.5 oz, caramel filled chocolate truffle with natural sweeteners of low glycemic index added to vitamins and supplements to reduce stress costs? I know we all want things for free, but honestly how much would you be willing to pay for something like that?

  Babson - chocolate + Zen Pricing Survey

  Also, I need as much data as possible in order to know if you would be willing to share this link with others who would be greatly appreciated! You are the best.

  Dave

  Done, and now I want chocolate.

• How much space do I need to allow for Vista while partitioning the hard drive?

  How much space do I need to allow for Vista while partitioning the hard drive?

  I am installing on a new drive hard and need to partition the hard drive.

  I remember he had a certaing amount allocated for vista and before recovery.

  Help, please!

  Hello

  40GBs is the minimum; who will be vey quickly useless.

  Recovery partition would have been photographed by the manufacturer of the computer hard disk and you can't replicate that.

  You can use all of the hard disk space available to install Vista on.

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  Hi Carol_971,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  I suggest that you try to start in safe mode and then try to log on to Windows using the default Administrator account and then remove the password for your account, check if it helps.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If you are unable to log on to Windows in safe mode, refer to the article below and then try the steps mentioned, check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

• How much should I pay to upgrade my computer laptop Windows vista to Win7 ultimate form?

  I'm not happy with my Win Vista Home premium SP1 base system so I want to upgrade to Win7 Ultimate, but would like to know how much I have to pay for it.

  Hello

  Go to your laptop manufacturer's website and check if Windows 7 drivers are available for your make and model laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  For more information about this, please repost this link in Forum Windows 7 Installation:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install

  See you soon.

• Connections iSCSI how much should I see?

  Hi all

  Also posted here - iscsi connections how do I see?-Spiceworks and here - communities.vmware.com/.../520622

  Running ESXi 5.5 and a PS4100X Equallogic, hoping someone point me in the right direction on something I noticed.

  Recently installed a MD3220i (https://community.spiceworks.com/topic/1114594-iscsi-port-binding-daft-question)

  After start installation and connection iSCSI can be quite long (as expected by using binding with several subnets iSCSI ports) but my question is not related to this.

  I came today to see what I can do to improve the time of starting, perhaps using static rather than dynamic discovery, and I noticed something weird.

  The Equallogic we have 2 NIC, 10.11.14.1 and 10.11.14.2. When using dynamic discovery I enter the IP address of the Group (10.11.14.253) and I get 8 connections, one for each IP address on the ESXi hosts to each IP addresses on the equallogic, see screenshot iscsi1.png

  Any fine.

  If I then switch to static and put 2 entries in by the data store (one for each NETWORK card on the equallogic) (see the screenshot iscsi2.png) then what I see in the equallogic is 16 connections to the host. Each data store is connected twice for each NETWORK card on the host, everyone via network cards on the equallogic, see screenshot iscsi3.png.

  I don't know if it's better or worse! I have several paths, so it should be better? Or I have many paths, and the system will get confused?

  Thank you

  Hello

  The best option to avoid the delay is for something like the broadcom iSCSI adapter unloading.  ISCSI S/W adapter would be bound to network adapters for volumes MD, (or bind something here and use several subnets rather) the unloading adapter would then manage the EQL triaffic.   This prevents the long startup delay since all related network cards trying to reach the defined all discovery addresses.

  I have never tried to use only addresses static w/ESXi, so I can't really talk about why you get the additional connections.  Unless it still makes a discovery, or the old static entries were still there after you have changed static.

  Kind regards

  Don

• How much is this going to cost me for updates?

  I would like to know how much I will charge for you to make updates?

  $0.00 in any currency.

  Install Firefox and mozilla.org updates are 100% free. www.mozilla.org/Firefox/All/

  You can even take the source and build it themselves.

  Is there a reason that there is a charge for a download of Firefox or updating?

• Membership how much should I / can I have?

  As Professor Technology Lab, I have a Macbook Pro, a classroom PC and an iMac of Home Office. I also have an iPhone and an iPad. Two questions: one of my computers has installed creative cloud application, but none yet downloaded to Adobe applications. Is it considered to be one of my installed computers? How 'educational memberships' Creative cloud should I buy for work on inDesign, Photoshop, Illustrator and Acrobat pre-press of any of my devices? So far, I bought one year prepaid student teacher creative cloud.

  Centerton Bob

  Please see this link for more information on the installation of creative cloud on multiple computers:

  FAQ: Can I install Creative Cloud on several computers?

• migration of the distributed switch standard, how much should be created?

  I'm migrating my VMs from standard to distributed switches.  Are there practices for distributed switches how you create?  Vmotion traffic must be on a separate dvswitch?  My plan was to a dvswitch for vMotion and the other for my VMs and mgmt of ESXi servers.  OR would they all simply in the same switch?

  Thanks in advance.

  Do not forget that each vDS need your own uplinks (physical network interfaces)... If you have enough rising, you can create several vDS, but with a small number of uplink, a better approach is to create just a single vDS and a group of ports for each type of traffic (vMotion, mgmt, VM)... and you can specify the uplink for each port group to use by using the configuration of aggregation and failover.

• How much should I pay Adobe for the publication?

  My company bought Adobe Creative Cloud and Google games and App Store Developer access.

  I prepare the publication (unique number) to the DPS. I would like to publish in the game of Google and the App Store as a free download.

  What are all the costs of this publication? Is 395 Euro for the preparation of the publication for Android version and publish in the App Store is free for owners of creative cloud? Or do I have to buy DOWNLOAD bundle also?

  Edition simple apps are iPad only and will be available outside of

  Subscriptions of DPS to May 1.

  You must contact Adobe to evaluate on a subscription.

• How can HI I create a printing guide for my business card with a size that includes the purge (3.75x2.25)

  

  It should look like this, the paper size is 12 in. x 18 in. thanks

  Create a 3.5 "x 2" "document to. 125" bleeds, the design of the map, place the file in the IDENTITY card in a 12 'x 18' document, step and repeat. " In this case, you can make corrections to a master doc and update the doc step and repeat. When you place the card check Display Options, so you can set with the bleeding.

  

  

• FIRMWARE (all). How NG will manage updates of f/w for routers sold after 06/01/2016 due to the FCC reg?

  https://apps.FCC.gov/oetcf/KDB/forms/FTSSearchResultPage.cfm?id=39498&switch=P

  Curious to know if any response NG, but also of the community.

  See http://www.snbforums.com/threads/netgear-says-it-wont-block-open-source-firmware-on-its-routers.3266...

• How can I create a mask of feathers for Polly Pixel edge if I don't want the particles hit the edge of the screen?

  I wish that the particles to falter before it touches the edges of the screen. I tried to add an another layer mask, to help avoid but its actually not what I want.

  Adjust your mask for the layer modes is masked the way you want and then add Pixel Poly. If the effect extends outside the mask, then compose before and add your masks the demo.

  

• Where should I go on my computer to find the pie chart that shows how much space is used/left on my computer?

  Where should I go on my computer to find the pie chart that shows how much space is used/left on my computer... (my question is not related to the questions at the beginning).

  Open my computer, right-click the drive icon, select 'Properties' and you'll see the pie under the general tab.

  Jim

  Microsoft MVP - moderator of the Forum - consumer security live a care - Live Mesh - Microsoft Security Essentials

• Should we leave how much free space on the C drive before affecting the performance and speed?

  Hello!

  Hard drive of my new PC (C) is 1 TB (processor Samsung 7i, Windows 8.1). It doesn't have any other disk/partition. How this space is safe to use to store large files (videos, esp., stored in the native video library file) without harming the performance and speed?

  And if I create another partition (D) and just use it for storage, it will make much difference compared to the above?

  Thank you!

  Anna

  Sunday, March 1, 2015 10:59 + 0000, AnaFilipaLopes wrote:

  And if I create another partition (D) and just use it for storage, it will make much difference compared to the above?

  Planning your Partitions

  The Question

  Partitions, how much should I have on my hard drive, what do I use
  each of them for, and what size should each one be?

  It s a common question, but unfortunately this doesn t have a
  only simple, just answer to all the world. A lot of people will respond with
  the way they do, but their response isn't necessarily best for the
  person seeking (in many cases it isn't right even for the person)
  response).

  Terminology

  First, let's rethinking the terminology. Some people ask "should I".
  partition my drive? That s the wrong question, because the
  the terminology is a little strange. Some people think that the word
  "partition" means divide the drive into two or more partitions.
  That s not correct: to partition a drive is to create one or several
  partitions on it. You must have at least one partition to use
  He who think they have an unpartitioned disk actually
  have a player with only one partition on it and it s normally
  Called C:. The choice you have is to have more than one
  partition, not that it's the partition at all.

  A bit of history

  Back before Windows 95 OEM Service Release 2 (also known as Windows
  95 (b) was published in 1996, all MS-DOS and Windows hard drives have been set
  using the file system FAT16 (except for very tiny to aid
  FAT12). That 16-bit only because were used for addressing, FAT16 has a
  maximum 2 GB partition size.

  More than 2 GB of hard disks were rare at the time, but if you had
  one, you must have multiple partitions to use all the available
  space. But even if your drive was not larger than 2GB, FAT16 created
  Another serious problem for many people - the size of the cluster has been
  more great if you had a larger partition. Cluster sizes increased from 512
  bytes for a partition to no greater than32Mb all the way up to 32 KB for a
  partition of 1 GB or more.

  More the cluster size, the space more is wasted on a hard drive.
  That s as space for all the files is allocated in whole clusters
  only. If you have 32 KB clusters, a 1 byte file takes 32 KB, a file, a
  greater than 32 k byte takes 64 k and so on. On average, each file
  about half of his last group waste.

  If large partitions create a lot of waste (called "soft"). With a 2 GB
  FAT16 drive in a single cluster, if you have 10,000 files, each
  lose half a cluster of 32 KB, you lose about 160 MB for relationships. This s
  back in an important part of a player that probably cost more than $400
  1996 - around $ 32.

  So what did the people? They divided their 2 GB drive in two,
  three or more logical drives. Each of these logical drives has been
  smaller the real physical disk, had smaller clusters, and
  so less waste. If, for example, she was able to keep all the partitions
  less than 512 MB, cluster size was only 8 KB, and the loss was reduced to a
  a quarter of what it would be otherwise.

  People partitioned for other reasons also, but back in the days of
  FAT16, it was the main reason to do so.

  The present

  Three things have changed radically since 1996:

  1. the FAT32 and NTFS file systems came along, allowing a larger
  partitions with smaller clusters and so much less waste. In
  with NTFS, cluster sizes are 4 K, regardless of the size of the partition.

  2 hard drives have become much larger, often more than 1 TB (1000 GB) in
  size.

  3 hard drives have become much cheaper. For example, a 500 GB drive
  can be bought today for about $50. That s 250 times the size of this
  Player 2Gb typical 1996, about one-eighth of the price.

  What these things mean together which is the reason to be old to have
  multiple partitions to avoid the considerable wastage of disk space left.
  The amount of waste is much less than it used to be and the cost of
  that waste is much less. For all practical purposes, almost nobody does
  should no longer be concerned about slack, and it should no longer be
  has examined when planning your partition structure.

  What Partitions are used for today

  There are a variety of different ways people put in place several
  scores of these days. Some of these uses are reasonable, some are
  debatable, some are downright bad. I'll discuss a number of Commons
  partition types in the following:

  1. a partition for Windows only

  Most of the people who create such a partition are because they believe
  If they never have to reinstall Windows properly, at least they
  He won t lose their data and he won t have to reinstall their applications.
  because both are safe on other partitions.

  The first of these thoughts is a false comfort and the second
  is downright bad. See the analysis of the types of partition 2 and 4
  below to find out why.

  Also note that over the years, a lot of people who find their windows
  partition that has begun to be the right size proves to be too
  small. For example, if you have such a partition for Windows and later
  upgrade to a newer version of Windows, you may find that your Windows
  partition is too small.

  2. a partition for installed programs

  This normally goes hand in hand with the partition type 1, a partition for
  just Windows. The thought that if you reinstall Windows, your
  installed application programs are safe if they are in another
  partitions is simply not true. That s because all programs installed
  (with the exception of an occasional trivial) have pointers to the inside
  Windows, in the registry and elsewhere, as well as associated files
  buried in the Windows folder. So if Windows, pointers and
  the files go with it. Given that the programs need to be reinstalled if Windows
  the fact, this reasoning to a separate partition for programs not
  work. In fact, there is almost never a good reason to separate
  Windows of the software application into separate partitions.

  3. a partition for the pagefile.

  Some people think mistakenly that the pagefile on another
  score will improve performance. It is also false; It doesn t
  help and often I hurt, performance, because it increases the movement of the head
  to get back to the page to another file frequently used
  data on the disk. For best performance, the paging file should normally
  be on the most widely used score of less used physical player. For
  almost everyone with a single physical disk than the same drive s
  Windows is on C:.

  4. a partition for backup for other partitions.

  Some people make a separate partition to store backups of their other
  or partitions. People who rely on a "backup" are a joke
  themselves. It is only very slightly better than no backup at all.
  because it leaves you likely to be simultaneously the original losses
  and backup for many of the most common dangers: the head crashes and other
  types of drive, serious glitches to power failure, near lightning
  strikes, virus attack, even stolen computer.  In my opinion,.
  secure backup must be on a media removable and not stored in the
  computer.

  5. a partition for data files

  Above, when I discussed separate Windows on a clean partition,
  I pointed out that separate data from Windows is a false comfort if
  He of done with the idea that data will be safe if Windows ever
  must be reinstalled. I call it a false comfort that's because
  I'm afraid many people will rely on this separation, think that their
  data are safe there and so do not take measures to
  Back it up. In truth the data is not safe there. Having to reinstall
  Windows is just one of the dangers to someone a s hard disk and not
  probably even one. This kind of "backup" falls into the same
  category, as a backup to other partitions partition; It lets you
  sensitive to the simultaneous loss of the original and the backup on many of
  the most common dangers that affect the entire physical disk, not
  just the particular partition. Security comes from a solid backup
  diet, not how partition you.

  However, for some people, it may be a good idea to separate Windows and
  programs on the one hand of the data on the other, putting each of the
  two types into separate partitions. I think that most people
  partitioning scheme must be based on their backup system and backup
  plans are generally of two types: whole hard disk imaging
  or data only backup. If you back up data, backup is
  usually facilitated by the presence of a separate with data only partition;
  to save just the score easily, without having to
  collect pieces from here and elsewhere. However, for
  those who backup by creating an image of the entire disk, there is
  usually little, if any, benefit the separation of data in a partition of
  its own.

  Furthermore, in all honesty, I must point out that there are many
  very respected people who recommend a separate partition for Windows,
  Whatever your backup plan.  Their arguments haven t convinced
  me, but there are clearly two views different here.

  6. a partition to image files

  Some people like to deal with the images and videos as something separate
  other data files and create a separate partition for them. To my
  the spirit, an image is simply another type of data and there is no
  the advantage in doing so.

  7. a partition for music files.

  The comments above related to the image files also apply to music
  files. They are just another type of data and must be dealt with the
  just like the other data.

  8. a partition for a second operating system to dual-boot to.

  For those who manage several operating systems (Windows Vista, Windows
  XP, Windows 98, Linux, etc.), a separate partition for each operating
  system is essential. The problems here are beyond the scope of this
  discussion, but simply to note that I have no objection to s
  all these partitions

  Performance

  Some people have several partitions because they believe that it
  somehow improves performance. That s not correct. The effect is
  probably low on modern computers with modern hard disks, but if
  whatever it is, the opposite is true: more music mean poorer
  performance. That's because normally no partition is full and it
  so are gaps between them. It takes time for the drive s
  read/write heads to cross these gaps. Close all files
  are, faster access to them will be.

  Organization

  I think a lot of people overpartition because they use scores as a
  organizational structure. They have a keen sense of order and you want to
  to separate the apples from the oranges on their readers.

  Yes, separating the different types of files on partitions is a
  technical organization, but then is to separate different types of
  files in folders. The difference is that the walls are static and
  fixed in size, while the files are dynamic, changing size automatically
  as needed to meet your changing needs. This usually done records
  a much better way to organize, in my opinion.

  Certainly, partitions can be resized when necessary, but except with the latter
  versions of Windows, which requires a third-party software (the and the
  possibility to do so in Windows is primitive compared to the third-party
  solutions). These third party software normally costs money and not
  any point and how stable it is, affects the entire disk.
  with the risk of losing everything. Plan your partitions in
  first place and repartitioning, none will be necessary.  The need
  to repartition usually occurs as a result of overpartitioning in
  the first place.

  What often happens when people organize with partitions instead
  records are that they make a miscalculation of how much room they need on each
  This partition, and then when they run out of space on the partition
  When a file is logically, while having plenty of space
  on the other hand, they simply saving the file in the score of "poor".
  Paradoxically, therefore, results in this kind of score structure
  less organization rather than more.

  So how should I partition my drive

  If you read what came before, my findings will not come as a
  surprise:

  1. If your backup set is the image of the entire disk, have just one
  single (usually c partition :));

  2. If you backups just data, have two partitions one for Windows and
  application programs installed (usually c :)), the other for data
  (normally D :).)

  With the exception of multiple operating systems, it is rarely
  any advantage to have more than two partitions.