How not to use any waiting in adf

Similar Questions

• How not to use the squint no functionality?

  I forgot how not to use the squint no functionality. Can anyone help?

  18.0 Firefox was released last Tuesday, you need to update.

  See if this FAQ for NoSquint answers your questions.
  
  https://urandom.ca/NoSquint/#FAQ

• How can I use a wait with a tank xD ending function

  Hello

  I want to read a series of data per second. I tried to use an incentive (ms), but it does not work if I put a termination tank xD. How to read data series every second?

  Eric wrote:

  How fast data arrives?  It is fairly regular or inconsistent in the calendar?

  As of soaps 100 counts/sec. (i am giving 100 counts/sec for checking purpose) Yes, it is incompatible to the calendar. (Radiation using counter measure Geiger counter).

  What you're trying to do with your 1 second of waiting/reading requirement?

  I need to measure the count rate (No. Heads of charge/sec), for that I need to read the data of every second. If there is no possibility to measure the County rate(counts/sec) without reading the data every second, it also helps for me. If possible, please give me a way to do it.

  What type of device you are talking about?  Are you sure he's sending reliable data?

  PSoC 4, I'm sure it sends the data reliably. And I get accurate data (in labview) which he is sending. But when I try to read the data of every second that I'm having this problem.

  I need to read serial data every second, or I need to measure the rate of cost by reading the continours of data series (inconsistent in timeline).

  You that VI you home is the same as fixed before.

  So he sends 100 readings per second, but you want only want to work with data which occurs at the 1-second interval?

  If this is the case even the second 1, configure the value of time delay on the VISA should not be a problem.

  So, you still want to read all the data that it is.  You cannot directly control the device and the frequency at which it sends, then keep reading as fast he sends.  Use the character to stop to your advantage so that you know that you have found complete messages.

  Now if you only actually use of data every 1 second, then use and elapsed time VI with a 1 second count on that to drive a deal structure that actually processes the data.

  Now, you will get all the data that comes in, but work with the data according to the interval you want.

• How not to use mobile otp verification in wordpress contact form

  Not can someone help me mobile PDAS use no verification of the contact form in wordpress

  How is it that is related to Windows?
  Message here:

  WordPress Support Forum

• How not to use no connection DB App with task flows created as 'New deal'

  Hello
  
  My request is entirely dependent on the Custom java datasource implementation and don't requires no connection DB at all. I made the necessary implementation (http://andrejusb.blogspot.in/2012/03/use-case-for-adf-bc-with-no-database.html) by creating CustomDatabaseConnectionStrategy that says
  

      @Override
      public ApplicationModule createApplicationModule(Hashtable env) {
        env.put(Configuration.DB_REQUIRES_CONNECTION,Boolean.FALSE);
        env.put(PropertyMetadata.ENV_DO_FAILOVER.pName, PropertyConstants.FALSE);
        return super.createApplicationModule(env);
      }

  My application works great until I have keep my transaction flow of task as "Operation No. Controller. Yes, I use the shell dynamic tab as UI model. But when I keep it as "Begin a new Transaction" and not to share control of data, the screen is not for all. I get an exception (I assume that when I try to open the workflow, he tries to get the connection. Since there is no connection available, it gives me this error. What then?)
  
  One of my requirement of customer is to open the screen even under multiple tabs as a screen of costs (i.e. with different transactions. "We do a transaction via Tuxedo transaction server). If I load a screen under the first tab with some data, added a few record, deleted records... and if I load the same screen on another tab, it should not refelect the same given what I have under the first tab.
  
  
  Requirement:
  
  I have no DB connection in my application. But I should be able to define the task flow to open with the new instance of the Application module whenever it is open.
  
  Your help on this would be appreciated.
  
  Rambeau

  If I understand correctly you requirements, you don't need transactions taskflow-ADF, but you just need to charge DataControls. If this is the case, you don't have to set the behavior of the taskflow transaction to "Always start with new Transaction" (e.g. keep it to 'No controller Transaction'), but the value of the "isolated" DataControl framework (e.g. uncheck the box "Share the data with the calling workflow controls" in the property inspector of the taskflow). In this case each instance taskflow starts in a different frame of DataControl (e.g. it will instantiate its own set of ApplicationModule instances).

  Dimitar

• Bishop Calc - how not to use the GUI interface

  Hello
  
  New on Calc Mgr. How the call where I can just type in my Business Rule and do not use the GUI? Can't seem to find it.
  
  Thank you

  I think that you are referring to formulas that you would write in EA

  In Calc nursery, find your application, go to the database under the APP and expand it as well.

  You should see "Scripts" under there. Right-click on 'Scripts' and select 'new '. White screen will appear and write exactly as you would in the EA.

  Save the Script, then you must attach the script to a rule (you can simply use a shell if you wish). Save, validate, and deploy

  GL

• How not to fix any low on Satellite A110-230?

  I read about other users having a few problems with the sound. There is no bass when I connect my stereo system. So I used the search and found a solution.

  Two renowned files! The sound quality is better now, but incomparable with other phones I've tried. Is there an update of the files or something to solve this problem completely? Maybe someone knows other drivers with a similar device, that I could install? I use the Satellite A110-230.

  P.S. I read on these issues in the forum. These messages are added a long time ago. Has not changed anything? N t some new drivers available?
  Nobody does correctly solved this problem?

  Hello

  I think the change of name of the two files is a solution and the bass appeared.
  To my knowledge the laptop came with no speakers brand.
  So in my opinion the quality of speaker in the same thing s like with Harman kardon speakers.

  The device also supports sound on board chip Realtek ALC861.
  You can try to install the latest driver on the Realtek site, and if you're lucky, maybe the low quality will increase.
  http://www.Realtek.com.tw/

• How not to use formatting on a worksheet of the Array function string?

  Hello

  I'm trying to convert a string of csv containing a cluster in a string array as part of a definition of profile for temperature/humidity chambers. I don't want to just format the output array because the values are not the same type. Can I use an empty string over the terminal of formatting? I have attached the VI. I also saw a few wiz bang csv read/write of things, but it's a school project so I can't use the code.

  Thank you

  Simon

  Just use %s as your format string.

  Do not use table of cluster and then ungroup cluster.  This is a hack, a Rube Goldberg.  Just use Index Array.  It's resizable down in order to get successive indices.

• How not to use Adobe Business Catalyst

  Hi, can someone tell me how I can avoid using Business Catalyst to publish a site using Muse?

  Thank you.

  You can select options while publishing the site:

  http://prntscr.com/6zberx

  Thank you

  Sanjit

• How NOT to use FormsCentral to create a form?

  Hello

  In Acrobat 9 I could make shapes like I wanted.

  In Acrobat 11, it seems he'll think that FormsCentral that I restains much.

  How can I create a form that I used to do in acrobat 9?

  Thank you

  The form that you linked was created by LiveCycle Designer. These types of forms are known as XFA forms and they cannot be changed in Acrobat. LiveCycle Designer has been included with the version of Windows Acrobat Pro before 11 Acrobat. It of a different program Acrobat and can now be purchased from Adobe.

• Lockroot and how not to use

  I have a movie that is nested in a few movies. At one point, I use some nested for loops to fill some ComboBox components it contains. The code goes like this:

  var xmlComboBoxValues:XML = new XML();

  xmlComboBoxValues.ignoreWhite = true;

  xmlComboBoxValues.load("xml/popUpWindowComboBoxValues.xml");

  xmlComboBoxValues.onLoad = function (): Void {}

  var oComboBoxTitles:Object = xmlComboBoxValues.firstChild.childNodes;

  for (i = 0; i < oComboBoxTitles.length; i ++) {}

  for (j = 0; j < oComboBoxTitles [i].childNodes.length; j ++) {}

  _root ["cb" + i] .addItem ({label: oComboBoxTitles [i] [j] Sublst.ChildNodes(1).ChildNodes(0),.attributes.label, data:oComboBoxTitles[i].childNodes[j].attributes.id});})

  }

       }

  };

  My problem is that if I replace "_root" to "this", it does not (and I don't know why;) I always had problems with this part to use a loop to iterate through several clips).

  This film is called by another movie through the PopUpManager class, so it is not the _root movie in its final version. If I use "this ._lockroot = true;" I can operate via the keyword 'root' (never been able to operate through "this", which is what I really want to) - but by locking its root, means I can't pass data back between the host movie and this movie because I blocked it out of the real root?

  This isn't a big problem at this stage of the app I am building, but it will become a problem, which is why I want to know his final as soon as POSSIBLE effect (and if I need to find a solution, and that's what).

  This Interior as onLoad method refers to your xml instance.  Try:

  var tl:MovieClip = this

  var xmlComboBoxValues:XML = new XML();

  xmlComboBoxValues.ignoreWhite = true;

  xmlComboBoxValues.load("xml/popUpWindowComboBoxValues.xml");

  xmlComboBoxValues.onLoad = function (): Void {}

  var oComboBoxTitles:Object = xmlComboBoxValues.firstChild.childNodes;

  for (i = 0; i< ocomboboxtitles.length;="" i++)="">

  for (j = 0; j< ocomboboxtitles[i].childnodes.length;="" j++)="">

  TL ["cb" + i] .addItem ({label: oComboBoxTitles [i] [j] Sublst.ChildNodes(1).ChildNodes(0),.attributes.label, data:oComboBoxTitles[i].childNodes[j].attributes.id});})

  }

  }

  };

• How not to use cache for an analysis

  I have an analysis that shows the last date of update of my data warehouse tables.
  because of the data cache, the date seen by users is incorrect.
  
  It is possible to force only this analysis to always read DW data, without the use of the cache?
  
  Thank you
  
  Luke

  In the Advanced tab of the report in the section prefix, type the following command

  Set the variable disable_cache_hit = 1;

  Check the box of the Bypass presentation Server Cache and then save the report.

  Thank you

• Any ideas how can I insert a pdf into word, by using the option object to insert. However, the pdf file that I want to insert text and annotated lines, but once inserted comments do not appear?  any help would be greatly appreciated.

  Any ideas how can I insert a pdf into word, by using the option object to insert. However, the pdf file that I want to insert text and annotated lines, but once inserted comments do not appear?  any help would be greatly appreciated.

  You will need to find a forum for MS Word, since it is the software you are trying to manipulate in the present.  If you think that the treatment/creation of the PDF file plays a role, then you should ask in the forum for the software that you use to create the PDF file.

  This forum is for a question about downloading and installing Adobe products test, so in all circumstances, your question does not fit in this forum.

• Please how can I use a value in a table of the adf in an actionListener to a button I created in a popup and thanks

  Please how can I use a value in a table of the adf in an actionListener to a button I created in a popup and thanks

  What is your version of JDev?

  Actually your question is not clear to me, but as I understand, it is you the table in the page and you have popup inside this popup you have the button you need when you click on the button to read the value of the selected table row. In the listener action button, so if you can get the current row of the table and after that you can get any attribute of the line as:

  DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("TableIteratorName"); // from pageDef.
  Row r = iter.getCurrentRow();
  Object value1 = r.getAttribute("attribute1");
  Object value2 = r.getAttribute("attribute2");
  

• How can I open ANY file on my PC. The habit of using file &gt; open &gt; filename

  Have Firefox 32.0.3.
  How can I open any file on my computer directly from firefox now?
  I used just click file > open > (filename) IE all my Open Office files.
  Files in Notepad, or any other file on my PC. Do not seem to have this capability
  with the new icon of the menu, or am I missing something.

  Hello cormact, you can customize the interface of firefox and put the open file button in the firefox menu: Customize Firefox commands, buttons, and toolbars

  or you can always open it with the keyboard shortcut ctrl + o...