How the data transfer?

Similar Questions

• Do we know how the data store is filled

  We do not know how the data store is filled, ran put space, is there a tool or a way to get the report how the data store is filled.

  1. go to the data store--> select storage views--> then apply different filters to see DS space utlization by VMs, instant.

  2. enable ssh esxi host and log in with the username/password of root and orders below

  #cd vmfs/volumes /.

  #du-sh *.

  This will list all the files/dir on this data store and its size in GB.

  3. or you can use DS to take a quick look at what.

  Thank you

  Hentzien

• How the data is stored in essbase

  Hello
  
  IAM new for hyperion essbase? Can you tel me how the data is stored in essbase?

  all values are stored as doubles. That's whay Essbase only stores the numeric values

• The data transfer between 4700 on new computer

  I have a bit of a quandry and hope someone here can help. I have a Dell 4700 who died. We bought a new power supply (someone suggested here) and we have the power, but still nothing else. I would like to transfer the data from this computer to a Dell 2700 with the same operating system. Since our 4700 seems to be dead, how can we do this? We thought that we could remove the drive of the 4700 and put it in the other, but the configurations are different. Is it possible to use a cable to transfer data, and if so, which one should I get?

  Thank you

  Alexis

  In my opinion, you can use the Coolmuster software to transfer and save data. It's so easy to transfer data between two devices. This tool apply to android phone, ios, windows, etec mac devices.

• The data transfer between the processor host RIo for PC

  I have two tables of data that I need to send to the sound card so I can listen to. Data on the processor of Rio. I realize I can write a file wav or something else, but I need the data streaming in. I can do this easily on the single PC of course, read and write to the card sound (or ADC/DAC etc.), but on the processor of rio, there is no card sound for obvious reasons and so I need to transfer data from a level to the PC. What is the best way to do it?

  More information, these data were acquired of a RIo FPGA and transferred via FIFO for Rio processor.

  Hello

  There are several available network protocols to transfer data from your target in real time to the pc. This article covers the pros and cons of those commonly used with LabVIEW Real-time.

  For dissemination of data tables between LabVIEW screws (one on the RIO, one on the host computer), I recommend the network stream if you use LabVIEW 2010 or later.

• How the data displayed parced

  OK, Im having a bit of trouble getting the data to display in labview. I like to read from a string of succession of data which is delimeted with «,» It works fine and I can get out to the token stringn. After 7 "blocks" of data, it will start to repeat themselves. How can I get that it displays each of these 7 chuncks of data, then on the next loop them refersh.

  That's all I have for now

  If I understand the problem, you have a string that has a number of embedded commas, and you want an array of strings corresponding to the 'things' between each comma.  Your reference to 7 'chunks' might suggest that each VISA read will return a string of the form x 1, x 2, x 3, x 4, x 5, x 6, x 7 (7 points, commas 6), but this solution does not how 'chunks', just that they are separated by commas.

  

  It uses regular expression matching function, with the comma as the regular Expression.  This VI basically splits the string into two parts, everything before the comma (the upper exit, highlighted as an element of array) and everything (number less than forecasts, put on a shift made through new register).  Each time through the while loop pull on another element, by adding to the matrix.  When nothing is left, the loop stops.

  Examine the three odd cases - string with no comma (get a table of 1 item with the full, correct string), string starting with a comma (get an array whose first element is an empty string, correct), string 1 element, ending (or not) with a comma (get a table to correct 1 item).

  Enjoy.

  BS

• How the data model works Active?

  Can someone explain to me, how Active Data Model Works?
  
  All data are managed in memory? When the changes to the database? benefits of use.
  
  Thanks in advance.

  chk this too
  http://docs.Oracle.com/CD/E23943_01/Web.1111/b31974/adv_ads.htm

• Number format not valid in the data transfer Assistant

  I'm trying to download data from a CSV file in a table via the download data wizard. However, it always seems to fail on some lines with an error "invalid number format". Even if I stick one of these lines in the wizard, it still does not work. There is nothing wrong with the data, and I can do a regular insert Toad with no problems.
  
  The data are:
  28126238,101, RM, 29/01/2011
  
  The table looks like this:
  CREATE TABLE STR_PROD_UPLOAD
  (
  NUMBER OF PROD_CD,
  NUMBER OF STORE_CD
  CHARACTER VARCHAR2 (10 BYTE),
  DATE OF REPL_START_DT
  )
  
  It works very well on Toad:
  INSERT INTO STR_PROD_UPLOAD)
  STORE_CD,
  PROD_CD, line, repl_start_dt)
  VALUES (to_number('101'), to_number('28126238'), 'RM', to_date('1/29/2011','MM/DD/YYYY'));
  
  Anyone have any ideas on what might be wrong or how I can go about the matter of finding?
  
  FYI - evolution STORE_CD of a varchar2 and PROD_CD solves the problem, but I would like to know if it is possible to solve this problem for later use.
  
  Thx John

  Hi John,.

  For some reason, I get the same error. However with the download of the data, you can still provide you own number format in the case where the application could not a defined automatically. In your case, using Date / field number Format (for example: 99999999) will force the system to use the supplied format.

  Concerning
  Patrick

• Universal Clipboard is encrypted and how the data is stored in iCloud

  Hello

  You need a deep understanding of the works of the new, universal Clipboard feature safety? The feature is nice, but do you copy your password by company store system administrator password... This password is moving all over the world and also through Apple servers... Don't make me happy.

  Who can guarantee that the communication is encrypted and the data stored in iCloud are not used for other purpose?

  Thanks and greetings

  Security and privacy - Apple Support Overview iCloud

  Although not listed here, all data transmitted to the Apple servers is encrypted in transit and on the server.

  I can't offer any advice on the question of whether your transmissions could be intercepted and decoded.

  They say they also unequivocally that they never provide encryption keys to any third party. Which has been further strengthened with their recent dealings with the FBI.

  You'll have to decide for yourself if you agree with what Apple says.

• How much data transfer during the thin VMFS copy to NFS, which does not support thin?

  1. I copy using - VMFS volume thin for a 2003 hosted server NFS volume.  However, there is no indication that the destination in charge it is thin, and the size of the file becomes the size declared.  When I copy the NFS share that does not support thin volume VMFS does, the file becomes thin.

  a. when I copy volume VMFS volume NFS, the amount of data actually traverses the network?

  b. when I copy volume NFS volume VMFS, the amount of data actually traverses the network?

  2. I have two identical servers with the same 5.1 ESXi on them.  When I copy one of them, starts immediately to 0% and charges while the other starts immediately to 10% and progressive count.  I have never seen this on another server.  If anyone has seen anything like this before?

  Thank you!

  IT_Architect wrote:

  I know already that thin size and thick.

  If the sizes are well apart from each other, it would be easy to see how much is transferred.

• Cannot open the pictures library after the data transfer to my new macbook

  I transferred all my data from my old MacBook Air to my new MacBook Pro via a restore from time machine.

  My first time to open my library on my News Photos Photos of MacBook says that he must perform the restore procedure (see screenshot in German language).

  

  After the confirmation of this message Photos responds with a message telling me that it can't open the library (see screenshot in German language). The message to distinguish basically says Photos tried to fix the library, but it was impossible to open it.

  

  Any ideas that I could do to fix this problem?

  Thanks, Gregor

  Try saving the photo library and hold down the command and option keys while pictures of launch and repair the library it - that sometimes seems to be more successful

  LN

• How the date can be filled with timestamp in dynamic sql

  Hi all

  Below we have sql

  v_stmt: = ' MERGE IN MTH_EQUIPMENTS_EXT_B ED

  WITH THE HELP OF)

  SELECT TAG_DATA,

  EQUIPMENT_FK_KEY,

  WORKORDER_FK_KEY,

  SEGMENT_FK_KEY,

  SHIFT_WORKDAY_FK_KEY,

  HOUR_FK_KEY,

  ITEM_FK_KEY,

  READ_TIME,

  ATTR_GROUP_ID,

  RECIPE_NUM,

  RECIPE_VERSION,

  NVL (FND_GLOBAL. User_Id,-1) l_updated_by,.

  NVL (FND_GLOBAL. Login_Id,-1) l_last_update_login

  OF MTH_TAG_READINGS_T_STG

  WHERE DB_COL = ' | " ' || v_colname | " ' ||') TS

  WE (';)

  v_stmt: = v_stmt | "ED. EQUIPMENT_PK_KEY = TS. EQUIPMENT_FK_KEY AND

  ED. READ_TIME = TS. READ_TIME AND

  ED. ATTR_GROUP_ID = TS. ATTR_GROUP_ID)

  WHEN MATCHED THEN

  UPDATE

  GAME ED.'. v_colname |' = TS. TAG_DATA,

  ED. LAST_UPDATED_BY = 1, ";

  v_stmt: = v_stmt | "ED. LAST_UPDATE_LOGIN = TS.l_last_update_login

  WHEN NOT MATCHED THEN

  INSERT ('| v_colname |', EXTENSION_ID, EQUIPMENT_PK_KEY, WORKORDER_FK_KEY, SEGMENT_FK_KEY, SHIFT_WORKDAY_FK_KEY, HOUR_FK_KEY, ITEM_FK_KEY, READ_TIME, ATTR_GROUP_ID, LAST_UPDATE_DATE, LAST_UPDATED_BY,';)

  v_stmt: =.

  v_stmt | ("LAST_UPDATE_LOGIN, CREATED_BY, CREATION_DATE, RECIPE_NUM, RECIPE_VERSION)

  VALUES (TS. TAG_DATA, EGO_EXTFWK_S.NEXTVAL, TS. EQUIPMENT_FK_KEY, TS. WORKORDER_FK_KEY, TS. SEGMENT_FK_KEY, TS. SHIFT_WORKDAY_FK_KEY, TS. HOUR_FK_KEY, TS. ITEM_FK_KEY, TS. READ_TIME,';

  v_stmt: = v_stmt | "TS. ATTR_GROUP_ID,' | '''|| SYSDATE | "'| ', 1, TS.l_last_update_login, TS.l_updated_by,'|"' | SYSDATE | " ' ||', TS. RECIPE_NUM, TS. RECIPE_VERSION)';

  EXECUTE IMMEDIATE v_stmt;

  After you run the above SQL last date of update in MTH_EQUIPMENST_EXT_B is filled with sysdate but timestamp is not its always 00:00:00. Can we have timestamp also populated through dynamic sql in the last update date

  Kind regards

  Amrit

  Values to hardcode in the dynamic SQL - never use bind variables:

  v_stmt: = ' MERGE IN MTH_EQUIPMENTS_EXT_B ED

  WITH THE HELP OF)

  SELECT TAG_DATA,

  EQUIPMENT_FK_KEY,

  WORKORDER_FK_KEY,

  SEGMENT_FK_KEY,

  SHIFT_WORKDAY_FK_KEY,

  HOUR_FK_KEY,

  ITEM_FK_KEY,

  READ_TIME,

  ATTR_GROUP_ID,

  RECIPE_NUM,

  RECIPE_VERSION,

  NVL (FND_GLOBAL. User_Id,-1) l_updated_by,.

  NVL (FND_GLOBAL. Login_Id,-1) l_last_update_login

  OF MTH_TAG_READINGS_T_STG

  WHERE DB_COL =: 1) TS

  WE (';)

  v_stmt: = v_stmt | "ED. EQUIPMENT_PK_KEY = TS. EQUIPMENT_FK_KEY AND

  ED. READ_TIME = TS. READ_TIME AND

  ED. ATTR_GROUP_ID = TS. ATTR_GROUP_ID)

  WHEN MATCHED THEN

  UPDATE

  GAME ED.'. v_colname |' = TS. TAG_DATA,

  ED. LAST_UPDATED_BY = 1, ";

  v_stmt: = v_stmt | "ED. LAST_UPDATE_LOGIN = TS.l_last_update_login

  WHEN NOT MATCHED THEN

  INSERT ('| v_colname |', EXTENSION_ID, EQUIPMENT_PK_KEY, WORKORDER_FK_KEY, SEGMENT_FK_KEY, SHIFT_WORKDAY_FK_KEY, HOUR_FK_KEY, ITEM_FK_KEY, READ_TIME, ATTR_GROUP_ID, LAST_UPDATE_DATE, LAST_UPDATED_BY,';)

  v_stmt: =.

  v_stmt | ("LAST_UPDATE_LOGIN, CREATED_BY, CREATION_DATE, RECIPE_NUM, RECIPE_VERSION)

  VALUES (TS. TAG_DATA, EGO_EXTFWK_S.NEXTVAL, TS. EQUIPMENT_FK_KEY, TS. WORKORDER_FK_KEY, TS. SEGMENT_FK_KEY, TS. SHIFT_WORKDAY_FK_KEY, TS. HOUR_FK_KEY, TS. ITEM_FK_KEY, TS. READ_TIME,';

  v_stmt: = v_stmt | "TS. ATTR_GROUP_ID,: 2, 1, TS.l_last_update_login, TS.l_updated_by,: 3, TS. RECIPE_NUM, TS. RECIPE_VERSION)';

  V_stmt EXECUTE IMMEDIATE

  With the HELP of v_colname,.

  SYSDATE,

  SYSDATE;

  SY.

• How the date of end of the units of measure?

  Hello

  What is the navigation at the end "unit of measures".

  We have noticed that there are a lot of undesirable UOM exist in our system.

  We do a cleaning.

  What is the navigation and the process to end the unwanted UOM date.

  Thank you very much

  Sandra

  Hello Sandra,.

  You can inactivate the unit of MEASURE. Please follow the Navigation, more

  The superuser inventory > Setup > unit of measure > unit of measure

  Put the inactive date in the column ' Inactive on "he will finish / inactivate the unit of MEASURE.

  Thank you

  GHG.

  NOTE:

  Please mark the post as helpful or answered if the update has really helped you. This would also bring the wire to the logical conclusion and will be useful for viewers.

• How the data automatically appear in the text element.

  Hi all
  I m using oracle 10g forms and reports on win xp.
  I have a table named "Estimate" that have the following fields: -.
  
  (1) Object_Name
  (2) Object_Code
  (3) Budget_Estimate
  (4) Add_Fund
  
  For Object_Name I have create the item list, I have 51 articles in this element of the list. When I press 'A', it shows me everything starts from "A".
  and it's the same for other alphabets.
  
  My problem is when I press 'A' in and select my specific name of the object and enter after that I got the specific object for the name of the object Code.
  For example, I have these names of objects and their Codes: -.
  
  Object_name Object_Code
  
  Pay 01
  Allocation 02
  Medical allowance 03
  Convince 04
  House rent 05
  
  Now, when I select the Object_Name Pay and press on enter, automatically appear 01 danslechamp Object_Code,.
  even that is, when I select rent house break-in, then in Object_Code filed appears 05.
  
  Concerning
  
  Sidibé

  Oh yes execuse me :)

  If I have your right point...

  Trigger WHEN-LIST-CHANGED

  SELECT Object_CODE
  
  INTO :NON_DB_TEXT_ITEM -- or a text_item
  
  FROM TABLE_NAME
  
  WHERE Object_Name = :Object_Name;
  
  -- Then Assign :NON_DB_TEXT_ITEM to a text_item in when-validate Trigger
  
  :TEXT_ITEM := :NON_DB_TEXT_ITEM;
  
  or u can assign the list value to a text item
  
   :text_item = :Object_Name;
  

  It could be that useful...

  Kind regards

  Abdetu...

  Published by: Abdetu on February 16, 2011 09:09

• When and how the subsidiary ledger data are filled in the Table XLA_DISTRIBUTION_LINKS

  Hello gurus
  
  I worked on a subledger of accountants and I was able to get a fair idea of how data is transferred from XLA_DISTRIBUTION_LINKS to XLA_AE_LINES and XLA_AE_HEADERS. According to my understanding, "Create Accounting" course XLA_DISTRIBUTION_LINKS data will comes down to from JOUNRAL_LINE_TYPES rules and conditions to load in XLA_AE_LINES and XLA_AE_HEADERS. Then during the 'Transfer to GL', data XLA_AE_LINES and XLA_AE_HEADERS are transferred to the GL Tables. What I did not understand, is when and how the data is loaded in XLA_DISTRIBUTION_LINKS. What are the rules and conditions and during what stage data will be charged at XLA_DISTRIBUTION_LINKS table? Can someone please explain to me how the data is transferred from the subsidiary ledger of the panels to the Table of Distribution of the SLA?
  
  Thank you
  Sunny.

  Top Notes are good.
  But I just wanted to add a point of fertilizers.
  xla_distribution_links and xla_ae_lines will be filled at the same time.

  The two goes on JLTs and their conditions. One is detailed and the other is summarized / merged.
  xla_ae_lines aura balancing additional lines and xla_distirbution_links were going to win extra / loss lines, which end with zero amount.

  Also check the links for the installer of identifiers for distribution.
  http://docs.Oracle.com/CD/E18727_01/doc.121/e13420/T193592sdextchap.htm#sdextacattg
  http://docs.Oracle.com/CD/E18727_01/doc.121/e13420/T193592sdextchap.htm#sdextdisidg

  By
  VAMSi