Creating a file executable, analog (sensor) does not work

Similar Questions

• Pavilion dv6 Validity Sensor does not work

  Hello..

  I reinstalled my Pavilion dv6-3300se, reinstall all drivers. But there is a problem. Validity sensor does not work and SimplePass Identity software is not found, even if I can find (DDK validity sensors) (default programs). I reinstalled it milion times but no use of it.

  Althouth I downloaded the latest version from the support page of the drivers on the HP website for my HP Pavilion dv6-3300se, validity sensor no longer works

  NEED HELP FAST

  Hello

  An option to try and install the latest version of SimplePass on the link below.

  http://www.EgisTec.com/websitedownload/patch/BioExcess/RELEASE7.1BUILD5.9%20BIOEXCESS7.1B5.0-HP.zip

  It is a zipped file.  If you do not have an extraction utility installed, download and install 7-Zip , which can be used to open it so that you can run the installer - just click with the right button on the zipped file, select 7 - Zip, select extract files and click OK. Setup for SimplePass located in the newly extracted folder.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Tecra A11 - 11L - fingerprint sensor does not work

  Hello
  I had a problem with my Tecra laptop. The fingerprint sensor does not work since yesterday. It also disappears from the hardware Manager. I tried to reinstall the utility, but the setup.exe will not run successfully. When I try to install the utility directly from the amd64 Directory installation will be successful, but the software is unable to connect to the fingerprint sensor. I also tried to install the original Windows image, but the sensor does not work.

  You have any ideas?

  Berst cordially
  Thunder1988

  You can try a BIOS update and set the default BIOS. If it still does not appear in Device Manager, the player is maybe defective or there is a connection problem. I'm guessing that the laptop is still under warranty, you may have to send the laptop to a Toshiba repair center.

• The fingerprint sensor does not work

  Hello, I have reset windows on my laptop and the fingerprint sensor does not work, windows recognize the sensor, but in the Device Manager, windows says there is a problem with the sensor, "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Thank you for your attention

  I finally found the problem reset the pc thanks for your attention somehow

  Good day.

• I am trying to create a VPN connection, but it does not work

  I am trying to create a VPN connection, but it does not work
  The wizard cannot establish a connection. And if I try to record simply does not connect
  It does not work. If I try to click on find the problem, there simply
  do nothing.
  I tried it on another pc, where it worked. So the problem is not the
  router or data network. And the curious thing is that I installed it before, but only from one day to the other, the VPN connection was missing.

  It does not create even a the connection icon
  Thank you

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• HP DM4-2070US fingerprint sensor does not work

  I have a HP DM4-2070us, and the sensor does not work. I reinstalled Win 7 Pro 64 bit with all the drivers of HP and all updates from MS, but the HP Simplepass software will not recognize the drive. I uninstalled the driver and Simplepass software and reinstalled both using all versions listed for my model on the support page of the HP drivers. The drive is correctly listed and shows installed in Windows 7 Device Manager. I installed another unit of material Validity Sensor and still the same issue.

  Yes, so apparently the software downloads & driver from HP support was insufficient to restore the function of sensor of fingerprint on top a new installation. It's a machine on which someone had partitioned and formatted the drive. I cloned the drive from an another DM4-2070us with the original configuration of the software and then it worked. Thanks for the suggestion.

• Setup could not initialize - I've lost hours trying to find solutions online and forum... to change the file to add .old - does not work; Open the file 2/2 still didn't work... Help!

  Setup could not initialize - I've lost hours trying to find solutions online and forum... to change the file to add .old - does not work; Open the file 2/2 still didn't work... Help!

  Please see the links below:

  https://forums.Adobe.com/thread/1848277

  https://forums.Adobe.com/thread/2055767

  Let us know, if you still get the same error even after trying it all the steps mentioned

• my laptop computer vpcsb16fg prints print sensor does not work

  I have sony vaio vpcsb16fg notebook and his impression fingerprint sensor does not work as I had sony remote India too but I was told that my laptop is having hardware problem, help and how this problem will be corrected.

  Hello Verhoeven.

  Try following the steps below and check if it works:

  Download and install the driver of fingerprints from here: http://download.sony-asia.com.edgesuite.net/vaio/downloads/Win7Original/20111Q/VPCSB/AUDFPD-00243103...

  Then, reinstall software TrueSuite software VAIO Care following all the steps here: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1017143

  Then, try to register a fingerprint and check if it works.

  Then, perform a restore of the system to an earlier time when it worked very well: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1003813

  Then, perform a full system recovery to restore your computer to factory settings. Restart the computer, keep pressing the F10 key continuously, press on enter key at the start of editing option, Recovery Wizard, select start and click on ignore VAIO Care rescue (if you do not want to back up data) to start the system recovery process.

  Note: It is necessary to backup all data before performing the system recovery as it erases everything from the computer.

  If the problem persists, contact Sony support team in your country to start the service: http://www.sony.net/SonyInfo/Support/

  Note: If my post answered your question, please mark it as an "accepted Solution".

• Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  If lr crashes repeatedly, reset preferences.   http://www.lightroomforums.NET/showthread.php?14226-resetting-%28or-trashing-%29-the-light file-Preferences-room

• Political image when I create a PDF file: warn and continue does not work

  Hello!

  I need to create a PDF file with many images, and I need to know if all this image is low-resolution (< 300 dpi). I tried to use the policy of the image in the PDF settings but it does not work, because if I choose "Warn and continue" (if the resolution of an image is < 300 ppi, warn and continue), the program creates the PDF file but do not get hot me and I see no message... and I'm sure there are bad pictures because I wrote a check to test with 72 dpi images.

  Thank you very much for your attention,

  Best regards!

  (Sorry if my English is not as good as it would be)

  You can use the preflight in Acrobat.

• Unlock the file and folder attribute does not work in LV 2012

  Hello

  I use unlock attribute to unlock a file (defined in the specification to build installer-> settings of the Source file-> file and folder attributes). This Setup program installs the application in Program Files (Win7 x 64) and when the application is started it creates a file in the folder "unlocked". I've used it several times with LV 2011, but it does not work with LV 2012 (the folder is not unlocked)? An example for LV 2012 (without installation) is fixed, the same example works if I build with LV 2011.

  I received an email from support TODAY:

  "As we have it, I analyzed the behavior you described ' unlock folders and files not working not. '"
  The error could be reproduced. It was also successfully detected and documented.
  The development team is working on this and the next update may have already solved this problem. »

  I hope that this will soon be :-).

• FILE EXPLORER Windows 10 does not work

  I upgraded from windows 7 Home Windows 10. Everything worked for three months. Now my file manager does not work. If I double click on a shortcut, nothing happens. No message or errors, no feedback at all. If I select file from the menu 10 windows Explorer it lists recent locations, but if I click on anything that it is once more the window closes and no feedback of any kind. To access my files, I have to go well as the search for application files. Is no more, I can add folders or improve my organization of files. Of course he used to work so I guess it has become corrupt. What do we do to fix this problem, I see, it is a common problem in looking at the forums for microsoft, but no one said a suggested fix worked.

  Hello

  Here what's new on the win10 File Explorer:http://windows.microsoft.com/en-in/windows-10/getstarted-whats-changed-in-file-explorer
  
  And here is the solution:

  The service is called Windows search and disabled once it provided functionality in the file Explorer. The search function in the file Explorer works but isn't looking in the taskbar.
  
  Step by step guide:
  1. hold Win + r to open the run
  2. type msconfig and click ok or enter
  3. click on Services
  4. go to Windows search (you can sort the list in descending alphabetical order)
  5. clear the check box
  6. click apply then ok
  7. Select restart now
  
  I hope it works for you.

• system files and command prompt does not work

  For the last two weeks, I'm having a nightmare. I disabled system restore and when I turned it on again every thing had stoped working (microsoft word and works procedssor), the user account micxrosoft help and support).

  I tried using command prompt, but it does not work properly. When I typed in the shadow of the list he has the right to copy, my name and disturbing without clichés present in this system.  When I go to system restore I just get ablank screen white. If I go into system the control panel says that my C drive is followed.

  I don't know what else to do Windows XP came with the perchase of my little computer. I only am not computer savvy very please check all instructions fool proof. Please HELP, as all I want for Christmas is saystem restoration. Thank you very much

  Please provide additional information on your system:
  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
  It seems that your system has or has had a malware infection.

  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine...

  You should be able to get your system restore calendar works again quite easily, but who will not only relieve your system of malware.

  Don't forget to fix the problem and the difficulty not only the symptom of the problem.

  If you disabled the system restore and he turned his back, which removes all points existing restoration (this is how it is supposed to work).

  I run a few scans of such malicious software indicated below, then work on all the remaining issues.

  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.  System Restore is sometimes so afflicted, you need to reinstall the system restore (you don't have to reinstall XP - just reinstall the system restore).
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  Restart your system and resolve outstanding issues.
  If your system restore calendar is always to show just a blank white screen, do the following:
  The scans using own it may also be necessary to re-register some dll (or you can do this part first, but you still have to do the scans).

  Re-record the dll is correct, even if they do not need re-registration.  You can also re-register the dll before the scans that can solve the problem, but the scans are always recommended.

  Click Start, run, and in the box enter orders following one at a time.  Click the OK button to execute each command one at a time:

  regsvr32 jscript

  regsvr32 vbscript

  regsvr32 /i mshtml

  The last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.

  Check your system restore calendar now.

  Do, or do not. There is no test.

  Someone please tell me how to make figgy pudding like these kids keep saying they won't until they get some.

  I decided to implement the points for a new puppy instead of a pony!

• Pavillion dv7 6c95dx: print software prints and SimplePass sensor does not work

  Hey there,

  I have a HP Pavilion dv7-6c95dx and prints print sensor and SimplePass software does not work.  I am unable to find the relevant drivers/etc on HP website.  Any advice would be appreciated.  The unit was bought in the USA.

  Thank you.

  Hello:

  I think that this driver since the dv7t-7000 will work as well as the security software to save your fingerprint.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103013-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5273846&sw_lang=&product=5273735

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117897-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5273846&sw_lang=&product=5273735

• Download the file in the email does not work!

  Help!  When I go to upload a file to my email, he opens the box "Gets information on the files" and the globe keeps throwing papers in the file but nothing happens. He's left no estimated time or download transfer rate FYI... its just EMPTY! I download but a simple email with attachments to adobe to just regular Word docs... NOTHING! This problem just started 3 weeks ago... I have mcafee antivirus on my computer. any info would be great!

  Do you know when this problem started?  Try a system restore to a point in time before the problem started (I have about 3 weeks ago - but give him some leeway if you can).  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  This should take you to when things were working properly.

  If this does not work (or you do not have a restore point old enough) what e-mail program you are using (name and version)?

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.