How the hewlett packcard solution

Similar Questions

• How to make a solution center to recognize a Photiosamrt Premium c410a that sits on the network

  I have two HP Photosmart Premium Fax c410a printers. One is in Florida and one in Ohio. I have HP Solution Center installed on a 64-bit Win7 machine. Solution Center has been installed on the computer when I installed the printer FL. Now in Ohio, the Solution Center does not recognize the c410a printer. How can I get Solution Center to recognize the printer. The printer is on the network and the centre of solutions recognizwes the printer from another computer running Windows Vista.

  Hi bill9998,

  Is this the same printer that you were using in FL?

  If this printer has a different IP address than you installed in Florida, you must run the setup.exe to add this printer to this computer using the IP address assigned to the printer.

• Anyone know how to get your money back?  My CC application does not start and I have tried the suggested workaround solutions listed above and they have not worked for me.  The amount of problems listed here in the forum, I have to ask the product is real

  Anyone know how to get your money back?  My CC application does not start and I have tried the suggested workaround solutions listed above and they have not worked for me.  I'm new to the CC Apps but use the versions installed for years.  The amount of questions listed here in this forum, I have to ask the product is really stable?

  Thank you.  I've deleted and reinstalled.  Seems to have solved the problem.

• How to change the language on the windows live solution Center?

  Help. I need to change the windows live solution center from Chinese to English... ideas?

  Go to http://windowslivehelp.com/profile.aspx, sign in, and then change the language.

  Noel

• How to remove the entire NAC solution?

  We recently received the request to work on the removal of the full implementation of the NAC of our company.  The major problem is that the security team in place now was not around when it was introduced a few years ago.  Any help on how the best way to rip it all up would be appreciated.  Weve got about 1500 users, so its not going to be a small project to say the least.  Fortunately for us, the team that has put in place did not a lot with it. IT doesn't check the user against the AD and allows or quarantines the user/machine, that's all.

  Version 4.7.2

  A question, what do you do with the migration? 802. 1 x?

  In any case, I think the best option is to remove the switchports for the NAC by defining "uncontrolled port". Please notice that you must configure the VLAN, because most of the time the VLAN initial NAC is configured to isolate the client computer.

  Please rate if this can help

  

• an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  Hi mdsavol,

  Your observations are accurate. The 'suggestions' are previous entries in the same column that correspond to what has been entered so far in the active cell. The only direct user control is to activate the function turn on or off in numbers preferences > general.

  There are other ways to include or exclude items of suggestions:

  • To remove typos in the suggestions list, the user must correct the typos in the cell above the active cell. If they are more in the list, they won't be presented as suggestions.
  • To include selections added to the list, the user must enter these suggestions in the individual cells above the active cell and column where they are wanted as suggestions.

  There was a request here a while there is a list of suggestion 'live' similar to those of some websites, which offers a descending list of possible entries as a type in an input box.

  The only way I see to reach a solution similar to what you have asked is to use as many lines at the top of the non-en-tete of the table section to list the items likely to repeat in your table, and then hide the lines. You'll need a list for each column where you want to use this feature with a list previously planted. Existing items will then require a likely hit up to three, then a click to choose from a list small enough to enter a value into a cell. News he will need to enter in full the first time, but after that it will be put on the list and answer the same thing as the terms preseeded.

  While your setting upward (or decide not to do), consider going on the menu of number (in numbers), choosing to provide feedback from numbers and writing a feature in Apple request. Describe what you want. Explain how he could help the average user numbers, and then hope for the best.

  Kind regards

  Barry

• How the photos are grouped in moments?

  As a result of this discussion (Re: Photos create two different times.) I would like to know more, how the Photos is split a library in moments.  Using Photos is rather vague on this issue.

  Someone would confirm, Torpedero observation?  What is your experience with the times?

  Change the time that I found and the explanation. If the different in time between photos are less than 5 hours they appeared all at the same time. In my case, the date is the same, but the first is 10:19 and the following is from 16:30. If I add a photo between them they appeared together in the same instant. After that I can remove this picture and they all stick together.

  It's a very promising discover.  We can merge the moments by inserting pictures, which will close the gaps between Monet, if the gap is more than 5 hours.

  And if anyone has found a similar solution to combine collections? My collections are all located at the borders between States.  I found no way to merge them, so that I can have a holiday collection.

  .

• Laptop HP 17 p100: how the usb flash drive big that I have to create a system of 10 Windows Recovery?

  How the big usb flash drive do I need to create a system of 10 Windows Recovery?

  Yes

  Hello;

  Let me welcome you on the HP forums!

  There is really no way accurately guess in advance, with one of the reasons being that the options are available when you do this.  An option creates a recovery drive minimum with what is needed to repair the operating system.  Another option creates an image that is able to completely restore the operating system and its partition.  Thus, the size can vary from 4 GB to the size of the partition to the OS.

  Myself, I found as build-in recovery to be unreliable, especially those of Ms.  So instead, I use a third-party imaging/restoration solution known as Macrium Reflect.

  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key

  My experience is that SIR, when you use the option of Compression high, typically allows to compress the image file recorded at about 50% of the space USED in the OS partition.  This means that if you have a 40GB and 80GB OS partition is used, MR must only about 20 GB to store the image file.

  I use all the time and it usually takes less than 10 minutes to make the backup of the image and at the same time or less do a restore.  In addition, MR has the ability to add a recovery Boot Menu entry.  This then allows you to boot into Windows re, and then you can use it to do a restore - when you cannot start Windows!

  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• How the hell Manager access if I don't have the password

  How can I disable Manager access if I don't know the password

  It's a Microsoft Forum, when it comes to passwords we can provide only the official Microsoft solutions:

  "Cannot remove a forgotten Internet Explorer Ratings password"
    <>http://support.Microsoft.com/kb/155609 >

  HTH,
  JW

• How the hell someone from Microsoft to help online?

  How the hell someone from Microsoft to help online?

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  OPTION has:

  I. open THE 32-bit (only) to https://consumersecuritysupport.microsoft.com/

  II. click on security updates aren't installed properly

  III. on the resulting page, click CONTINUE

  IV. Select country/language appropriate, then click CONTINUE

  V. click on the PHONE or the E-MAIL supports the option.

  OPTION B:

  Start an email from Windows Update support incident request for free

  OPTION C:

  http://supportservices.Microsoft.com/support/services/windows_update > here is a review of the Department: http://www.pcworld.com/article/245772/microsofts_answer_desk_offers_live_free_and_fee_tech_support.html#tk.nl_wvx_h_cbstories>

  http://support.Microsoft.com/contactus/?ws=support#tab2>

  UTC/GMT is 10:40 on Sunday, February 5, 2012

• How to disable Lenovo Solutions Scan it permanently?

  Hello

  How to disable Lenovo Solutions Scan it permanently? I think it's what his name. It appears on my screen.

  Thanks in advance.

  The following steps should disable the analysis of material on version 2.8.xxx

  Launch of LSC.  On the homepage, select dashboard. Change

  If hardware scan is on events not monitored, move it to the left side. Save the settings.

  This option will now be shown on the dashboard and check-up tab.

  Material analysis event inform into/out of the dashboard does not change the scan function. Hardware scanning on the dashboard does not change the scan option.

  ==

  Now to the hardware scan tab check-up.  Then select the option of planning.

  Now, you can turn off the option to run.

  

  

  The extent of the Task Scheduler,

  win10 > AutoScan > apps > win 10 administrative tools > Task Scheduler.

  For other OS, follow Sashi notes.  If you can find disk management, you can find task scheduler.

  =

  

  Right-click on the entry, disable.

  Sashi comments to disable parsing by moving the selection of dashboard are incorrect.

  We are now good!. Upgrade to the latest LSC.

• How the installation and from D-link DES-1024r program to the internet so I can use 2 PCs on the internet

  How the installation and from D-link DES-1024r program to the internet so I can use 2 PCs on the internet

  "Why can´t I share my Internet connection on multiple computers if you use my D-Link switch or hub?

  "If you connect directly to a cable or DSL modem, you will need a router to share your Internet connection or a computer using ICS (Internet Connection Sharing) or Proxy." Switches and hubs don't allow you to share a single IP address to multiple computers.

  Another solution is to contact your ISP and buy additional IP addresses for each additional computer. "

  D-link support found here: http://www.dlink.com/products/default.aspx?pid=DES-1024D&tab=3

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open the message of solution in the Action Center in windows 7

  I got the solution in the windows 7 Action Center, but I can't open it. I don't know that my internet connection is good. How can I get the message of solution? Thank you.

  Same here, but I can have a work around.  Had a Windows 7 BSOD twice in a week.  Both times the Windows Action Center reported that he had a solution, but when I clicked on the link to view the solution, the Details of the Message screen says he was unable to download the solution and told me to check my Internet connection.  Clearly not the problem.  I clicked on the link "see all the problems that this applies".  Check-video equipment 2 errors and the other "stop unexpectedly" (BSOD).  Workaround: in an event random dumb luck, I clicked on the back arrow at the top of the Action Center to return to the display of the details of the Message, and as if by magic, instead of the same message on checking my Internet connection, it displays the solution!  Now, don't get excited too - the proposed '' solution '' is not really a solution for the BSOD or apparent problem with the NVIDIA graphics card.  Here you go:

  A problem with the NVIDIA graphics driver

  NVIDIA Graphics Driver has stopped working properly.

  An update of the driver, as appropriate, could prevent this problem does not happen.

  There are several ways to find and install the driver updates, but it's best to let Windows do it for you. Try the step below, which describes the process. If it does not produce a driver update that resolves the problem, try the remaining steps in the order shown.

  1. Look for the optional third-party updates

     Even if all the critical updates have been installed on your computer, the optional updates may be available for NVIDIA Graphics Driver, who have not yet installed. Here is how to use Windows Update to find and install the updates driver option:

     1. Click here to open Windows Update in Control Panel

     2. In the left pane, click check for updates to see if there are any optional updates available for your computer.

     3. If the optional updates are available, click the link to view and select the updates to install. (If you don't see this link, you may need to clickSearch online for updates from Microsoft Update).

        If no optional updates are available, go to step 2.

     4. Select the optional updates, you want to install (especially if they seem to be related graphics), clickOK, and then click install updates.

  2. Try to manually update the NVIDIA Graphics Driver

     If no optional NVIDIA Graphics Driver update was available in Windows Update, you can try the NVIDIA Graphics Driver update manually.

     Note
     It's best to let Windows automatically installs the drivers for your hardware, as described in step 1 above.

     If you decide to manually update the NVIDIA graphics driver, here's how:

     1. Click here to open the Device Manager if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

     2. In Device Manager, double-click display adapters, and then double-click the name of the NVIDIA Graphics Driver device running.

     3. Click driver , and then click set to update driver.

• When asked how you want to search for driver software, click search automatically for updated driver.

• Windows locate and install a new driver, if available.

• See the NVIDIA Corporation Web site for driver updates

  If no optional NVIDIA Graphics Driver update was available in Windows Update, go online to the following site to check for driver updates:

  Click here to go to find out if a solution or an updated version is available online on the website of NVIDIA Corporation

How to upgrade manually a pilot using a file downloaded

1. Click here to open the Device Manager

2. In Device Manager, locate the device you want to update, and then double-click the device name.

3. Click driver , and then click set to update driver.

4. Click Browse my computer for driver software.

5. Click on the Browse button and look for the folder that you saved on your desktop.

6. Select the folder that contains the driver files.

7. Click OK, and then click Next.

8. Follow the instructions to complete the driver installation.

Note
If you run the latest version of the NVIDIA graphics driver and you still experience the problem, we recommend that you contact NVIDIA Corporation or by the manufacturer for support, and additional information.

• Visit the Web site of the manufacturer of your computer for driver updates

  If NVIDIA Graphics Driver was preinstalled on your computer, check the Web site of the manufacturer of your computer for driver updates.

  How can I find the manufacturer of my computer?

  Click on the Start button , typemsinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as themanufacturer of the system in the right pane of the system information window.

  Click here to go online to see the contact information for most of the computer manufacturers

  How to upgrade manually a pilot using a file downloaded

  1. Click here to open the Device Manager

  2. In Device Manager, locate the device you want to update, and then double-click the device name.

  3. Click driver , and then click set to update driver.

  4. Click Browse my computer for driver software.

  5. Click on the Browse button and look for the folder that you saved on your desktop.

  6. Select the folder that contains the driver files.

  7. Click OK, and then click Next.

  8. Follow the instructions to complete the driver installation.

What is a driver?

A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.

• Pavilion dm1: how the recovery 2 and 3 disc (dvd) to be bootable on USB?

  Hi, my drive hard computers have crasched so I decided to buy a new hard drive and also the recovery kit that comes as a dvd discs. But given that the computer have any dvd player I need to move the data from dvd-drive to a USB key. So I use another computer to 'move' the data between dvd and usb (I use powerISO program, to copy the data into the ISO and make it bootable on a USB key).  To make the USB bootable for the first disc is easy because it contains bootable files but I don't know how the dvd 2 and 3 to be initiated through the USB, they do not contain startup files. So I did not be longer when the recovery program stops and application disk 2. Any suggestions?

  I found a solution, and it's a simple.

  Just move all *.wim DVDs 2 and 3 files to the directory disk 1 on the USB stick PRELOAD. I also changed the information in info.dat and the SSRD.dat (place in the Repertory of PRELOAD) file to not understand anything of disc 2 or 3, if necessary, I do not know...

  Info.dat:

  BOOT

  SSRD.dat:

  NumberOfDiscs = 1
  SOURCE_ROOT = C:\RM\Image\
  UP_SIZE = 69631
  UP_OFFSET = 204800

  After that, it was only to start the computer, press ESC and select boot from a USB...

  * Note. The USB is made bootable for disk 1

• How the form to register on the edge of adobe?

  HY, how the coding form to register on the edge of adobe? Please help me

  

  Hello

  you don't have to answer I found the solution!
  I had to just put

  on the stage composition lends the following command:

  {if(Top!=Self)}

  Top.Location.Replace (document. Rental);

  }

  Thank you very much for your support.

  Good day

  Davide