Score Windows Experience lowered from 5.8 to 3.4 after reinstallation of Windows 7

Similar Questions

• Envy TouchSmart 20: Need USB drivers for HP Envy 20 which was lowered from Win8 for Win7 64 bit

  I need USB drivers for a craving 20 TouchSmart, which was lowered from Win8 to Win7 64 bit. The Device Manager has the following information:

  PCI\VEN_104C & DEV_8241 & SUBSYS_2AE5103C & REV_02
  PCI\VEN_104C & DEV_8241 & SUBSYS_2AE5103C
  PCI\VEN_104C & DEV_8241 & CC_0C0330
  PCI\VEN_104C & DEV_8241 & CC_0C03

  Thanks in advance to anyone who can help

  Hello:

  This driver should work...

  Texas Instruments USB Controller Driver

  File name: sp70786.exe

• How can I stop technotronic tv ranging from vga to out of reach after windows has loaded?

  How can I stop technotronic tv ranging from vga to out of reach after windows has loaded?

  VGA Out of range usually means that the display resolution is not properly set for television "limited."  Demarrer start in safe mode, and then set the resolution to a lower setting.

• put all my pictures from recovery disks 1-2-3 after re buting the computer tried to re install won't let me download them

  put all my pictures from recovery disks 1-2-3 after re buting the computer tried to re install won't let me download them help

  Hello

  Read the results of a problem similar to yours at this link Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/restore-backup-after-clean-installation/2b443d83-BFE9-4601-A055-a10e7ec7e183

  See you soon.

• Delete photos from my camera do not roll after the update to 9.3.1 IOS iphone 4s, also the photo has not saved when taken by camera

  Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera

  Mhefzi86 wrote:

  Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera

  OK, thanks for sharing.

  Maybe you can provide clarification comments on what happens when you try and what troubleshooting steps you did.

• laptop ranging from 120 GB to 24 GB after formatting drive c

  Hello.

  My hp dv 2000 series, with operating system Vista notebook, went from 120 GB to 24 GB after that I formatted the c drive.

  I use the cd of restoration of hp support staff, let it run by itself. When you are finished, the pc is running out with 24 GB partition.

  So, I Don t even no place for updates or anything else.

  How can I reinstall the bigger hard drive?

  Thank you.

  Hello

  Please visit the following link to resolve the Incorrect Hard Drive Partition size problem appears in Vista

  http://support.HP.com/us-en/document/c00870036

  Please copy and paste the link into the new browser...

  Thanks and greetings

  miranstar

• Color print from my hp printer deskjet 5550 after installing a new iMac computer

  I try to print in color from my printer hp deskjet 5550 after installing a new iMac computer.  Do I need a printer driver for Mac, and where can I find the printer driver?  Operating system is OS X Lion mountain.

  Any help would be appreciated.

  Hello

  The HP Deskjet 5550 is not compatible with Mountain Lion and, therefore, the question appears:

  http://support.HP.com/us-en/document/c01856359

  Try the 3rd party HPIJS print drivers that seems to support your printer. don't forget to install one of the 3 downloads required below:

  http://www.linuxfoundation.org/collaborate/workgroups/OpenPrinting/macosxhpijs#Downloads_Required

  Now add the printer in Print & Scan by clicking on the menu drop-down use, and then click Select printer software.

  Select the driver HP Deskjet 5550 HPIJS in the list and add the printer.

  Shlomi

• I had a computer stop working (broke) who was running CS3. Now I have a new computer and downloaded Cs3 from my Adobe account online. After you have downloaded and installed, I entered my serial number and it won't work. I could not turn it off on m

  I had a computer stop working (broke) who was running CS3. Now I have a new computer and downloaded Cs3 from my Adobe account online. After you have downloaded and installed, I entered my serial number and it won't work. I couldn't turn it off on my computer due to the fact that it broke down.

  The serial number you have is a Volume License serial number, which works only with the specific volume license Installer. Please visit the Adobe license | Serial numbers | Orders | Accounts.

  I hope this helps.

• Base score Windows Experience Index-how to improve Graphics score online?

  Vista Home Premium score is 3.5 because graphic Graphics & Gaming... I don't know how to improve these online & the best score is CPU = 4.9... no idea or help there... thanking you, yours sincerely liam k

  Hello

  Once your graphics hardware has later graphics drivers installed or Web site of the manufacturer of the computer or the manufacturer of the graphics card, that's all.

  The only way to improve the graphical result is to buy and install a better graphics card.

  Don't worry too much about what says the Windows experience index.

  You have no graphic problem?

  Therefore, there is no need to worry about this.

  See you soon.

• "Show my windows and tabs from last time ' has stopped working after software updated to the end of January or early February. Now on 12.0a2. Change options "Auora to start: ' no longer works.

  I use this feature for years and update Firefox/Aurora in the next few days, maybe a week, an update becomes available and everything suddenly ' show my windows and tabs from last time ' has stopped working. I can go to the Tools-Option-general tab and change "at Aurora startup:" to this option, or 'Show my home page (s)' and now the opening in a new tab single even though I have URLs there. This may mean that this bit is not read correctly. I'm not playing: config, but I watch a few spoken options in the Web and everything looked OK.

  I would uninstall and reinstall it if you think it will solve the problem. I updated Aurora again because this problem started and it remains broken. It is a system of XP with SP3

  PS: I have two other windows with a XP and the other Windows 7. When I had the problem on my primary XP System I stopped to make updates to other systems. Today I updated the two other systems with the latest Auora (skip one or two updates) and both work very well.

  The best way for me to trouble?

  Hey punchcard4rjw,

  Have you tried to start Firefox in Mode safe? Key 'shift' startup of Firefox. If it doesn't happen in Mode without failure, you should read the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems.

  If this does not work, you should look the article How to fix preferences that will not save.

  Hope this helps!

• "show my windows and tabs from last time ' does not work after upgrade to 8.01

  After I've upgraded to the latest v8.01 I lost all my tabs sites and even trying to add them and save them with the tools > Options > general > start > when Firefox starts selected have to "show my windows and tabs from last time" she does not hold registered sites and browser restarts it always loses all tabs and shows only a tab with Firefox home Web page. I need to open several sites to work and the only way to do it now is to make sure, I click on the current use in "pages" under General Option of the tools. It's getting very boring because I keep changing my tabs to different sites in a meeting and I am used to simply close the browser, based on making them all back in when you restart Firefox.

  Have you tried to delete the file or move it to another location?

  There should also be a file sessionstore.bak that contains the previous session, i.e. the sessionstore.js file found at the beginning of the current session and is used to restore the previous session via ' history > restore previous Session '.

  Also, make sure that Firefox is closed correctly and that there is not any suspended the process Firefox

• Does anyone know why the e-mails from a server have been removed after the upgrade to Windows 7 (Windows Live mail) to Windows Vista (Windows Mail)?

  Or can I can return to windows mail to collect emails?

  Thank you

  [Moved from comments]

  It is likely that he was not prepared to leave a copy on the server, so by default it deleted messages on the server after you download the WLM.  This is my point of view on what happened anyway.

  Old Windows Mail messages should still be there.  They were previously under c:\users\[username]\AppData\Local\Microsoft\Windows Mail under local folders (see www.oehelp.com/backup.aspx#wm).  I think the upgrade leaves a Windows.old directory and you can try to look into it.  What you want are eml files which are messages.  Alternatively, you can use my free ceml (www.oehelp.com/ceml/) to view them.

  But you will not be able to retrieve them from the server, if they have been deleted.

  Steve

• Please, please help. No sound from my sound card on board after installing windows 7

  I just installed windows 7 ultimate 64 bit on my computer that previously had windows xp professional sp3 top.  My motherboard, what I don't know, is an a32gv11c from ASUS with a team of a soundcard SoundMax.  I have absolutely no sound and can't seem to find the drivers for it anywhere.  Y at - there anyone out there that can help me to find the driver I need to get a sound?  Help, please.  Thank you.

  I know it's my advice, which means that the hardware manufacturer, who has done this.  The installation for the integrated sound card cd says that the current operating system is not supported, which to me makes sense because this material was released before windows 7.

  All documentation is in stock and not accessible.  I looked inside to the motherboard and can't seem to find any useful information pertaining to the brand of it...  I never spent by with any programs driver utility because my model did not appear.

  Issues that everyone seems to have is with no sound from sound card after installing windows 7, not just isolated to my sound card.  I have a hard time believing I am eternally screwed with no sound from my computer because of my hardware not supported under windows 7.  There must be a solution out there.  I realize that I should have found that now but can not which is what brought me to this forum.  Someone knows and can help me.

  You are not 'for always screwed"- you can always buy and install a sound card which the manufacturer supports their product under Windows 7 - operating system, you choose to run.  The trick is to have a piece taken in charge (by the manufacturer) hardware or software - * under the operating system you choose to run *.

  Yep - you've had this old Ford Mustang you bought this Nitro kit for... But now that you have this new Ford Mustang - Nitro kit may not work.

  Your only real solution: get a piece of hardware - audio device - supported under Windows 7 by its manufacturer.  Else do you play with fire, may or may not work and even if it does not, could be broken by the next patch or update.  If you have a PCI or PCIe available slot, find a cheap good sound card (trust me - the one you had would have qualified as cheap) and throw it in.  15 USD and up to I guess.

• I can't print from Lightroom 4 or use gmail after I upgraded to Windows 10

  Since the upgrade to Windows 10, I can't print from LR 4 or use my gmail

  Hi carolt,.

  Please uninstall the printer & software drivers, reboot the machine and reinstall the updated drivers for the printer manufacturing site.

  Let us know if that helps.

  Kind regards

  Mohit

• I upgraded windows XP from SP2 to SP3, 30 seconds after the opening session, successfully the PC plant and restarts... Why?

  Several failed attempts later, I tried to restart in "Safe network Mode", which is where I am currently.

  My next option, I might try a system to a previous restore... point?

  Any advice would be greatly appreciated.

  TKS

  richardsavard,

  Problem solver Windows XP Service Pack 2/3

  http://winhlp.com/node/125>

  06/05 / 1107:50: 14:00