How the user has to connect SysDBA?

Similar Questions

• How to connect to the user: virtue in sqldeveloper sysdba system? I know how in sqlplus.

  I was wondering how you do it using the wizard/interface to specify the configurations for a NEW connection.

  It comes as I get b/c I don't know where or how put '\as sysdba' in the NEW connection, that I am creating with success.  I can do very well with just to connect to the user: System, but not sysdba \as!

  Login name: system_connection_as_sysdba

  Username: System

  Password: [password here]

  Host name: Localhost

  Port: 1521

  SID: orcl

  Developer SQL has a drop down separate called 'Role', where you can select SYSDBA instead of default.

• How to determine that the user has purchased an article or not?

  Hello

  Can someone tell me how can I determine if the user has purchased an article or not?

  Until now, I add to the cart and then allow user to pay for this item through Paypal. But now, my goal is to show all these items that the user has already added, but not bought yet.so, whenever user logs in a/c, he can see the item in my cart.

  Please... help me

  This sounds like a question of PayPal, then you will want to check these forums. If you were using in-app purchases of BB, so yes, it has an API to check the previous in-app purchases.

• How can I get the user name of the current user? Not the name of the user, but the user name is connected to.

  Anyone know how I can get the username of the current user? Not the name of the user, but the user name is connected to.

  Thank you!

  Only two variables that Captivate allows to work with are cpQuizInfoStudentName and cpQuizInfoStudentID, but the latter is only really designed to be used for the internal information server, not a typical SCORM LMS solution.

  Sounds to me like you may need to get hands on with the services of a JavaScript programmer.

• A report that will show how a user has used the secure area?

  Hello everyone.

  I need to view a generated in the report on the activities of the Member section to securezone.

  The ideas are greatly appreciated.

  I've tried selecting the protected area (in the areas of Secure), click on action -> View Secure area usage report

  But it just displays: no data available for the period selected. no matter how to set the filter of time.

  Best regards

  Jones

  It seems that it is a duplicate to your message in this thread: is there a report that will show you how a user has used the secure area? . I will follow on this issue on the same thread.

• How to call user B to drop/create an indexes on a table owned by the user has?

  Hello!
  We have the following situation:
  = > user B has a table that has an index
  = > user connects to the database and must have sufficient privileges or the ability to drop/create an index for a table owned by the user B.
  Since there are several different schemas in the database, it is not possible to grant the privilege "to create any index' or 'delete any index '.
  for the user.
  = > to do even more complicated: the necessary procedure must not belong to user B
  
  I tried to solve this problem with a stored procedure (which belongs to user C). Why do we use user C? C the user has several packages,
  procedures and functions that get used by other users (for example for purposes of logging, refresh materialized views,...)
  
  So the logic is:
  = > user A calls user procedure C. In this procedure the call "run immediately" ALTER SESSION SET CURRENT_SCHEMA = B' "»
  is executed successfully. The next step, the < drop index B.i1 > statement would get executed. But this statement fails with the
  exception ' ORA-01031: insufficient privileges ".
  
  If this procedure is created in the schema of the user B then everything works fine - but because of our current design of the database, this procedure
  must belong to the user C.
  
  Does anyone know a solution to this problem?
  
  Any help will be appreciated
  
  Rgds
  JH

  I think you need the privilege DROP_ANY_INDEX directly to user C.

• How to make a slide to wait until the user has answered a question correctly, even after activation of a smartshape?

  Background:

  I created a questionnaire in which the user must answer each question correctly before to proceed to the next slide. That's what I did:

  
  

  • Set preferences Settings > required > respond to everything - the user must answer each question to continue
  • Set the number of attempts at the level of the question to infinity
  • Made the Next invisible button and disabled the PlayBar

  In this way, the user can proceed to the next slide in the issue with the submission process - and, since attempts are endless, this means that after having answered the question correctly.

  Current objective:

  I want the user to be able to click on a prompt for a hint. To configure this, I did the following:

  • Created a smartshape titled 'click_for_hint' to display the text that says: "click here for a tip.
  • Created a smartshape labelled 'hint' text display
  • Show "hint" success value "click_for_hint".

  Now, when the user clicks on the text that says: "Click here for a hint," the suspicion appears. So it works - great! However, once the indicator is activated, I would like to for the user to continue endless attempts until respondent correctly to the question... and then only after answering correctly, proceed to the next slide.

  The problem:

  If the user has submitted one or more wrong answers, and then activates the indicator, the slide just waiting until the user has answered the question correctly. Instead, it will be set in playing, proceeding to the next slide. I tried the smartshape 'hint' to take a break on the success of adjustment, but it does not work.

  Is there a way to make the slide to wait until the answer to the question correctly before moving on to the next slide, even after the indicator has been activated?

  Are you aware that your required parameter can cause problems, the blocking of the user? It is also completely useless because you have unlimited attempts at the level of the issue and hid the next button (hope, you don't need review, otherwise, I would recommend not to hide this button but slide it under the Clear key: the Question slides in Captivate - Captivate blog)

  The index problem is related to the fact that a simple gesture going out of reading. I would like to see the timeline of the slide, to compare the points of suspension form and the question slide button. And maybe this blog can also clarify difference between simple/advanced: Why choose Standard Simple action?-Captivate blog

  Regarding the buttons on question slides form: buttons on slides of Question/Score of Captivate 6?-Captivate blog

• What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

  I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Check if the user has selected box element apex before the loading of the page

  4.2.1

  THM:2

  Hello world

  I have two classic reports with different conditions but even select the columns based on a sql that uses the apex_item.checkbox2 element that allows users to select the lines and run some process. I also have a radio unit that hides and shows these two reports. However, it is possible that the user select a few lines and without doing anything click on the radio button that will present the page and all the lines that earlier he had chosen will be lost. I want that we should be able to pop an alert if there are checkboxes checked and the user tried to hit the button of the radio looks like the APEX_APPLICATION. G_F01. Count is not available at the time the page is submitted. We thought to use a pl/sql to see if APEX_APPLICATION DA. G_F01. Count > 0 then trigger an alert to confirm.

  Any ideas on how to do this?

  Thank you

  ryansun wrote:

  Hi FAC586 - basically, there are two parts of the report, were grouped products consolidated (as master) and the other report has all the products of the child. So based on the option the user selects that he sees who discovers and processes information.

  I tried to create the DA, but he does not seem to fire and I'm sure it would be because I have something wrong.

  No, in this case, there was a typing error in my JS expression above (this is what happens when there is no example in the trial against...)

  Must be:$('td[headers="COL_ALIAS"] input:checked').length > 0

  I have page submit on the evolution of radio, given that other elements of the actual application, don't do with this feature which is filled on the loading of the page.

  It does not work. If the present radio on the presentation changes group cannot be controlled by the dynamic action to confirm that it has already been committed before the confirmation message is displayed. Presentation must be made by further action of real on the DA. By the way other values is possible by using dynamic actions or region to submit elements of Page properties.

  But here it is necessary, if the user has activated all the lines, then changes the selection of the radio, it should show an alert to confirm. In addition, what happens if we have a very select in the box by a header label already. Can I use the same label to identify the COL_ALIAS?

  Do not understand the question.

  Don't know what I'm doing wrong.

  As I noted above, an important part of your problem is that you asking what amounts to a series of questions XY rather than the big picture given by presenting the necessary resources. You have been really good on the creation of examples on apex.oracle.com, but they are all fragments of the righteous, which makes things difficult when you try their synthesis in something that works as a coherent whole. Various bits and pieces that have been revealed in recent weeks, it seems like this could be treated using dynamic measurements without having to send the page until the final choice has been made.

• Check if the user has submitted a webapp entry form

  Hello

  I try to have a landing page that will display the submitted user web app content, if the user has completed entry form and entry form if he or she does not.

  I thought I'd use liquids of BC, but I'm not sure what to check...

  [{% if webappitem.itemid > 0-%}]

  user submitted content display detail view

  {else %}

  view the webapp entry form

  {endif %}

  ??

  It does not, moreover, is the itemid, a number or a string. I should rather check if an element name is submitted by the user exist? What is the syntax for this?

  Use the webapp sent by customer module. Executer run as a collection, and then use it. size of the filter on the items to count how many there are.

• Is it possible to create a variable that tells you what slides, the user has visited?

  Hello.

  I'm working on a project where I want a slide to display a button continue and hide the 2 areas of text, but ONLY when the user has already visited 2 other slides. I can only find variables indicating the slide the user previously visited.

  Is it possible to set a variable that does this?

  I want to create the following advanced measures:

  If the user has visited slides 62 AND 87, image_536 to show and hide text_caption_243 and text_caption_242

  I don't want action be executed if only 1 2 slide have been opened - it must occur when the two were opened.

  Hope that makes sense.

  I use 7 Captivate.

  Thank you.

  You will need two variables, it can be Boolean values. I will label them v_one and v_two with a default value of 0

  Because I don't know how the slides are formatted, do you use a Next button or are all visited media executives? You will need to have an event on the two blades to trigger an action:

  Assign the v_one with 1 slide 62

  And a similar action on the other slides to alternate v_two (do not use the toggle command, if the user accesses a slide twice, it could be toggled to 0).

  
  

  You do not specify where these text containers need to be (please, label your objects and slides)? But you'll need advanced conditional action triggered by another event somewhere:

  IF v_one is equal to 1 AND

  v_two is equal to 1

  See the Text1

  See the Text2

• The button should be VISIBLE unless the user has entered all of the required fields?

  Hello

  I have 10 fields in the form, 3 are required/mandatory fields to enter the data. And I also kept a button with caption CHECK THE FIELDS.

  I also kept a 2nd button, say legend is GOOD TO GO (this isn't a SUBMIT button, the two buttons are normalbuttons)

  At the point of HRT, GOOD TO GO button is "hidden"

  Now, say, user forgot to enter the 2 required fields and you press the button CHECK THE FIELDS, guest user 2 times with popup legends field of respect.

  Now user entered in 1 field and forgotten again to enter the data in another area and pressed the button CHECK FIELDS, guest user 1 time with a popup with the caption for field of respect.

  Now, the user entered in this field too, very well and CHECK THE FIELDS button, the user has NOT prompted with a popup.

  BUT at this POINT, I need to see THE/PRESENCE button GOOD TO GO

  Please let me know how can they do it in JavaScript?

  Thank you

  In the click event of the button CHECK THE FIELDS, you can check if all three need to fields are filled. Therefore, you can do the "Good to Go" button hidden/visible.

  If (reqField1XPath.rawValue! = null & reqField2Xpath.rawValue! = null & reqField3Xpath.rawValue! = null)

  {

  If all three fields are filled as a visible button

  GoodToGoButtonXpath.presence = "visible";

  }

  on the other

  {

  GoodToGoButtonXpath.presence = 'hidden ';

  }

  Where reqField1XPath, reqField2XPath, reqField3XPath, GoodToGoButtonXpath must be the XPath of the field.

• The button should only VISIBLE if the user has entered all of the required fields?

  Hello

  I have 10 fields in the form, 3 are required/mandatory fields to enter the data. And I also kept a button with caption CHECK THE FIELDS.

  I also kept a 2nd button, say legend is GOOD TO GO (this isn't a SUBMIT button, the two buttons are normalbuttons)

  At the point of HRT, GOOD TO GO button is "hidden"

  Now, say, user forgot to enter the 2 required fields and you press the button CHECK THE FIELDS, guest user 2 times with popup legends field of respect.

  Now user entered in 1 field and forgotten again to enter the data in another area and pressed the button CHECK FIELDS, guest user 1 time with a popup with the caption for field of respect.

  Now, the user entered in this field too, very well and CHECK THE FIELDS button, the user has NOT prompted with a popup.

  BUT at this POINT, I need to see THE/PRESENCE button GOOD TO GO

  Please let me know how can they do it in JavaScript?

  Thank you

  You were absent; After each statement - no need after 'else '. Don't know what you're doing with b? B get used somewhere? Also, I think I've fixed your resolveNode syntax. Give it a try.

  for (var i = 0; i)< myarray.length;="" i++)="">
  If (xfa.resolveNode("VISITORINFO["_+_i_+"]").rawValue == null) {}
  b = xfa.resolveNode ("VISITORINFO [" + i + "]"). caption.value.text.value;
  x = "BAD";

  App.Alert (x);
  }
  on the other
  {
  If (x! = 'BAD') {}
  x = "GOOD";
  App.Alert (x);
  }
  }

  }

  Good luck!

  Stephen

• Installed Vista Ultimate windows! and now my drivers must be updated and can't do the Internet WiFi the cause has no connection?

  Original title: installed windows vista Ultimate edition!

  Hi, can someone help me I installed windows vista 32 bit full on my hp computer and now my drivers must be updated and I can't get on the network internet WiFi the cause has no connection? I basically can't no internet at all what I do? Help, please? or if I can restore my computer back to get my files and original programs?

  Use another computer to access the HP website and download the drivers for your Windows Vista computer model.  Transfer them to your computer using a USB stick, external drive, CD - R, etc. Boulder computer Maven
  Most Microsoft Valuable Professional

• which detects that the user has changed the clock of the device?

  Hi all my application dependent on the clock time in the device settings. who can my application to detect if the user has replaced the unit time? Thank you

  Salvation;

  It's the Question2:

  and I found the solution:

  bps_initialize();
  Subscribe (clock_get_domain ());
  clock_request_events (0);

  void ApplicationUI::event(bps_event_t *event) {}
  unsigned int dcode = bps_event_get_domain (event);
  If (dcode is {clock_get_domain()})
  unsigned int code = bps_event_get_code (event);
  if(code == CLOCK_INFO) {}
  Q_EMIT dateorclockuserChanged(); signal function qml
  }

  }
  }

  Thanks a lot for your help