which detects that the user has changed the clock of the device?

Similar Questions

• Im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected.

  Hi im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected. What should I do? Thank you

  Hello

   
  1. have you checked the problem by plugging the headset to another computer?
  2. it worked before?
  3. What are you talking about ""device"is not connected?
   
   
   
  I suggest you to connect to another computer and check.
  Also check if the device is compatible with Windows 7.
  Reference:
  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/
  If it's compatible, perform the methods below
  If it is not compatible, see the following articles:
   
   
   
   
  What is program compatibility?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
  
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
   
   
  Method 1: Run the audio Troubleshooter and see if it helps.
  Open the audio playback troubleshooting utility
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter
   
   
   
  Method 2:
  Run the Fixit described in the article and perform the steps:
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  See also:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
   
   
   
   
  I hope this helps.

• Air iPad - iTunes does not recognize the recovery mode because it detects that the device is locked with a password

  Well I'm really frustrated here. I have an iPad Air that I bought for my roommate who unfortunately passed away in October, and so his family gave me his iPad Air and all the other things I had bought for him.

  Here's the question. iTunes appears whenever I turn it on and says he can't go because its locked with a password. Good not much according to Apple's site, I reboot into recovery mode... Problem is... nor iTunes 11 or 12 will be pop - up and say its been detected in recovery mode, even if I restart the computer and then reopen iTunes.

  What I'm missing here? I am running Windows 8.1, the computer recognizes that its been plugged with two modes... It is the thing of most frustrating I've ever lived and I can't do it in recovery unless its connected to the computer. I tried pressing the home key, which starts just the iPad as usual, as soon as I fix the cord. Also, I don't know what version of the software is (I guess 7 since he never really used) - apparently different versions of the software have different recovery quirks.

  I tried the DFU instructions and powers of the iPad on the same before Apple logo the first 3 seconds that you are supposed to hold down the power button.

  I am disabled and home because of the panic and anxiety so go to the Apple store isn't something that would be easy for me so if anyone has a solution, I'm all ears.

  It was easier to make a gold card HTC that is to delete this thing and that says a lot, considering the amount of work went into those back in the day...

  One last thing. iTunes will NOT open if the iPad is already connected. I have to unplug it, forcing iTunes close then reopen.

  Post edited by: Saeren

  You should try to do a hard reboot on the air of the iPad, press and hold the power button and the home button until the apple logo appears.

• Firefox has detected that the server redirects the request for this address in a way that will never end.

  This week (01/10/12) I registered on youtube and now I can't log back in here or in my gmail account. I tried every fix-it/single remedy offered the FF forum but nothing works.

  Any other work, all the sites that I frequent load fine, is youtube doing something on purpose for FF users? I can get the page youtube videos and see, but I can't log on, every time I click the sign in button, I get:

  "The page is not redirecting properly".

  Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
  

  This problem can sometimes be caused by disabling or refusing to accept cookies. »

  I hate to be a conspiracy theorist, I can connect to youtube without problem on IE, but I hate this browser. I use windows 7 and 15 FF. Can someone find it?

  Looks like it's a firefox issue, because that never happened on IE, Safari or Opera on me.
  You think not that a simple patch can solve this problem. I have to delete individual cookies every day.

• I deleted my account on a site I'm going and it keeps saing that Firefox has detected that the server redirects the request for this address in a way that doesn't

  He repeated to me that Firefox has detected that the server redirects the request for this address in a way that will never end.

   This problem can sometimes be caused by disabling or refusing to accept
     cookies.
  

  Have you tried to clear the cache and cookies?

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  See also:

  • http://KB.mozillazine.org/cookies
  • http://KB.mozillazine.org/The_page_is_not_redirecting_properly

• Firefox has detected that the server redirects the request for this address in a way that will never end. I followed your instructions and nothing works. This just started happening today.

  I was watching www.ustream.tv/decoraheagles for months. I started using Firefox about a month ago. Earlier today, when I tried connecting to the site, I received the message "Firefox has detected that the server redirects the request for this address in a way that will never end."
  I went on your site and follow the instructions. This Web site was not in the blocked sites. He told me how to add it, and I did.
  She still refuses to open this site.
  Internet Explorer WILL open this site.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".
  • http://KB.mozillazine.org/The_page_is_not_redirecting_properly

• message from Firefox: "page isn't redirecting properly" Firefox has detected that the server redirects the request for this address in a way that will never end. * Why this mess

  "The page isn't redirecting properly?

  i receive this warning on a daily basis. it seems to occur whenever i open a message  in gmail or try to send a message. anybody have a clue about this? thanks!
  

  Firefox has detected that the server redirects the request for this address in a way that will never end.

     *   This problem can sometimes be caused by disabling or refusing to accept
           cookies.
  

  See http://kb.mozillazine.org/The_page_is_not_redirecting_properly

• Windows Media Player cannot play the protected file. The player has detected that the connection to your hardware might not be sure

  I just bought the New Avengers movie with the digital copy. I moved it and now I can't watch it. I have "Windows Media Player cannot play the protected file. Drive detected that the connection to your hardware may not be safe. "when I click it. What now?

  Hi Jason,

  Thanks for asking this question to Microsoft Community.  I'll try and help you resolve the problem; However, I will need to ask you a few questions.

  Are you able to play other movies without any problem? Have you done a recent software or changes to the material on the computer?

  Here is a link with some good steps. Go through it and check if it helps. Also check out this article and see if it helps.

  Also, see the steps in the article and see if it helps.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• What is this error represents "another user has changed the line containing oracle.jbo.Key [21 primary key]."

  Mr President.

  What is this error represents "another user has changed the line containing oracle.jbo.Key [21 primary key]."

  Concerning

  You get this exception quite often when you have a business in PL SQL layer, but you can safely ignore (suppress) it by substituting the lock() method in all implementation of your entity classes.

  /*** customizing locking management: 
  * Because attribute values can change 'outside' ADF standard life cycle, 
  * when optimistic locking executes, the exception "Another User Changed the Row" is thrown. 
  * In this case, we execute locking again, ignoring the exception 
  */ 
  public void lock() 
  { 
   try 
   { 
    super.lock(); 
   } catch (oracle.jbo.RowInconsistentException e) 
   { 
    if (e.getErrorCode().equals("25014")) 
    { 
    super.lock(); 
    } 
    else throw e; 
   } 
  }
  

• Another user has changed the primary key

  uses 11.1.1.5.0 - adfbc jdev
  
  After each insertion while saving the recording
  get error like this > > > another user has changed the primary key
  
  What should I do to avoid this?
  

  <?xml version = '1.0' encoding = 'UTF-8'?>
  <BC4JConfig version="11.1" xmlns="http://xmlns.oracle.com/bc4j/configuration">
     <AppModuleConfigBag ApplicationName="com.rits.glm.model.servicesAM.generalLedgerAM">
        <AppModuleConfig DeployPlatform="LOCAL" JDBCName="goodwell" jbo.default.country="IN" jbo.project="com.rits.glm.GeneralLedger" name="generalLedgerAMLocal" ApplicationName="com.rits.glm.model.servicesAM.generalLedgerAM">
           <Database jbo.locking.mode="optimistic"/>
           <Security AppModuleJndiName="com.rits.glm.model.servicesAM.generalLedgerAM"/>
        </AppModuleConfig>
        <AppModuleConfig DeployPlatform="LOCAL" JDBCName="goodwell" jbo.default.country="IN" jbo.project="com.rits.glm.GeneralLedger" name="generalLedgerAMShared" ApplicationName="com.rits.glm.model.servicesAM.generalLedgerAM">
           <AM-Pooling jbo.ampool.dynamicjdbccredentials="false" jbo.ampool.isuseexclusive="false" jbo.ampool.maxpoolsize="1" jbo.ampool.resetnontransactionalstate="false"/>
             <Database jbo.locking.mode="optimistic"/>
           <Security AppModuleJndiName="com.rits.glm.model.servicesAM.generalLedgerAM"/>
        </AppModuleConfig>
     </AppModuleConfigBag>
  </BC4JConfig>

  a few suggestions
  Houston-25014: another user has changed...
  http://adfhowto.blogspot.com/2010/12/troubleshooting-another-user-has.html
  Another user changed the row with primary key

• I have Firefox 12.0 installed and when I open Youtube and/or Gmail they detect that the browser is obsolete. Why is this happening?

  I have Firefox 12.0 installed and when I open Youtube and/or Gmail they detect that the browser is obsolete. Why is this happening?

  You have a pref general.useragent.override, which identifies you as a Firefox/4.0

  • Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.8.1.16; .NET CLR 2.0.50727; ffco7) Gecko/20080702 Firefox/4.0

  See:

  • https://support.Mozilla.org/KB/finding+your+Firefox+version
  • https://support.Mozilla.org/KB/websites-incorrectly-report-Firefox-outdated-or-in
  • http://KB.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

• A banking site does not open, detect that the DNS is not responding.

  facing problem by opening a bank site.

  a banking site does not open, detect that the DNS is not responding.  Is this problem on the site of the Bank everyone or internet connection problem mine?

  Hello

  1. which version of the Windows operating system is installed on your computer?
  2. What is the error message or an exact error code?
  3. this phenomenon occurs only at a particular Web site?
  4. what version of IE are you using? (If you use Internet Explorer)
  
  I would sugget you follow the methods and the chcek below if it helps.

  Method 1: Find out what version of Internet Explorer you are using

  a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.
  b. press ALT + H and then click on about Internet Explorer

  Method 2: Follow the link and check if that helps.

  Can't access some Web sites in Internet Explorer
   
  

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Method 3: You can also follow the link and check if it helps.
  You cannot connect to or connect to Web sites in Internet Explorer secure
   

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  It will be useful.

• My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

  Good day.

• How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed?

  Original title: I need a market to resolve the problem remove the instrument.

  How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed? I have closed all other programs and waited for varying amounts of time, and tried all of the fixes that have been proposed on this site. Nothing works. I don't want to turn off the computer whenever I have to remove the device.

  I can't know what "all patches" you've tried, but:

  Make sure that the system restore does not monitor the external drive.  SR does need to control the system drive and to the system drive, SR has only about 1 GB of space max.  Make a right click my computer and select properties then the System Restore tab to configure SR.

  Make sure that the Indexing Service is turned off (at least for the external drive).  To disable disk indexing completely, which will also speed up your computer a bit, see http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp.  For the external drive, right-click on the drive icon in my computer, select properties and uncheck the indexing disc

  There are different workarounds short to shut down the computer, but you might want to try this third-party app first:
  http://safelyremove.com/index.html  Among other features:

  The device cannot be stopped now. Why? Never encountered the situation when Windows does not allow you to remove a device? Unlike Windows, USB remove will show you programs which prevent the device to be stopped and let you close these programs or just files that they opened on the device.

• Adding a device:-201401. Make sure that the device is connected?

  I was able to set up my Explorer Measurement & Automation to detect my device (NI cDAQ-9188), but I'm unable to add the device.  The error statement says:

  Add the device failed.  From the device driver error report is as follows:

  Add a device

  -201401

  Recovery of the properties of the network device failed.  Make sure that the device is connected.

  How can I fix this so that I can test my modules e/s?

  DAQmx version: 9.7.5

  Operating system: Windows 7 64-bit

  Initially:

  In the tab network adapters, it reads:

  -No network adapters found

  In the tab of the firmware, it reads:

  -firmware version: 1.1.0f0

  Based on the status of the network configuration tab, I assumed that my problem was related to the network connection.  I have reset my network cards and this seemed to solve my problem.  Thanks for your help.