How the XML message parssing

Similar Questions

• How the XML element used in RTF PUBLIC/PRIVATE? I know how to hide columns in RTF, but do not know how to generate xml below way. Help, please.

  Hello

  I'm following link below to show/hide my columns dynamically. See "formatting of column.

  http://docs.Oracle.com/CD/E12844_01/doc/BIP.1013/e12187.PDF

  According to the doc element can be made in private/public.

  <items type="PUBLIC">
   <item>
    <name>Plasma TV</name>
    <quantity>10</quantity>
    <price>4000</price>
   </item>
   <item>
  

  And even can be used to hide the column with the help of State

  <?if@column:/items/@type="PUBLIC"?>
  

  MY QUESTION IS HOW TO DO THIS IN MY XML BELOW?

  Here's the part of my XML code that I use in the definition of the data to RTF.

  <group name="GH3" source="QH3">
  <element name="COLUMN_HEAD3" value="COLUMN_NAME" /> 
  </group>
  <group name="GH4" source="QH4">
  <element name="COLUMN_HEAD4" value="COLUMN_NAME" /> 
  </group>
  

  I'm out like that.

  <LIST_GH3>
  <GH3>
  <COLUMN_HEAD3>REBILL_TO_OTHER_BUSINESS_UNIT</COLUMN_HEAD3>
  </GH3>
  </LIST_GH3>
  <LIST_GH4>
  <GH4>
  <COLUMN_HEAD4>XYZ</COLUMN_HEAD4>
  </GH4>
  </LIST_GH4>
  

  In order to use the logic according to the oracle document I want output like this.

  <LIST_GH3 type="PUBLIC">
  <GH3>
  <COLUMN_HEAD3>REBILL_TO_OTHER_BUSINESS_UNIT</COLUMN_HEAD3>
  </GH3>
  </LIST_GH3>
  <LIST_GH4 type="PRIVATE">
  <GH4>
  <COLUMN_HEAD4>BLANK</COLUMN_HEAD4>
  </GH4>
  </LIST_GH4>
  

  Should what changes I make in my XML to get the result of the execution as above? Help, please. Where should I make changes in the XML above? Name of the Group? Name of the element?

  I intend to use it under condition in RTF model to hide the column, but do not know how to set the column as PRIVATE/PUBLIC type in the XML output that is used to populate the data in the RTF while running.

  <?if@column:/BTSPIEXP/LIST_GH3/@type=”PUBLIC”?>COLUMN_HEAD3<?end if?>
  

  Kind regards

  Patricia K.

  Hello

  Problem has been resolved. I used the value of the item to determine whether to show it.

  Kind regards

  Patricia K.

• OSB: Mail Proxy Service retrieve only the xml message that has of the

  Hi all.
  I have a Service Proxy with the type of Messaging Service that read xml from a message queue.
  Type of Message in the proxy request is xml and I have provided the type information by stating (in the element and the type of field), the XML schema for the XML document type exchanged.
  
  I need the service proxy to retrieve xml messages that have the appropriate schema from the queue.
  
  But when the proxy retrieves a msg of xml in the queue independently of their schema definition.
  
  Appreciate your comments.
  
  THX,
  Ross
  
  Published by: user6677631 on February 25, 2013 09:52
  
  Published by: user6677631 on February 25, 2013 10:02

  Select the XML schema for the type of query in a messaging proxy does not entering from the schema XML message validation. Similarly, if you create a proxy based WSDL validation against definition WSDL only will not happen automatically. Choose XML as the message type only will ensure that all XMLs malformed will be rejected before entering the flow of messages. For validation against the schema, you need to explicitly add an action to validate in the proxy mail flow, if the validation fails triggers an error and get back the message to the queue or save the wrong message and commit the post/message to a queue of the error.

• BlackBerry smartphones this smart phone is so smart, he can type your thoughts, no need to show me how the text message!

  Indeed, have Yes, you ever tried to compose a text message from a blackberry curve 8520? No, you can't! other than

  as a response. 'Nice one', you stupid programmers of BB... "try to add your contacts to your first address" I hear you say no, thank you, I don't want coz I do not wish to keep or I don't want to waste my time. I need to get rid of this machine prety fast, faster I can type f.o!

  @hrn

  -go to SMS and MMS in your main menu

  -Press the menu key

  -Select Compose SMS

  -It will then give you the "to:".

  -type in the number you want to text by pressing the ALT key followed by the key CAPS, this will give you a number entry only. You can also press ALT before each number you enter.

  I think what is confusing, is that we see to:... and we automatically assume that we have a saved conact and entry only takes a NAME of contacts or the alphabet? No.... Press ALT + CAPS and you can type the number you want to send to.

• Check the XML writer, how to work with signature

  We intend to use the recorder XML record for our paycheck, we have a USB attached to a HP 4510 with signature bmp on it. Could you help me understand how the XML report can talk to the printer to print the signature on the right place. I did a lot of reading and learned something about GhostScript, pilot pasta and so on. But I feel little difficult to understand how all these components work together.
  
  I used to work on a project that allows to print on a printer PCL writer check rdf, it was easy to use PCL to tell the printer how to print the signature, but as the output of the XML check PDF writer, I'm really lost how to do this.
  
  Thanks in advance for your help.
  
  -Bill

  Bill,

  XMLP does not produce the PCL output you have to shoot a .bmp of signature of a SIMM card or a USB drive connected to a printer, the output is just in PDF format. You can work around this by mapping a USB (plugged into a PC of the Department of the AP, let's say the Manager) to a specific URL, then coding your model to get the signature of this URL. If USB is not inserted into the PC at the time where controls are formatted, the signature could not be found and the model can be made to show a stamp "NULL" instead. The basic approach is detailed on the blog of Tim Dexter, [http://blogs.oracle.com/xmlpublisher/2007/11/hard_check_print_security_alte.html].

  Another option is Evergreen, a solution of the third party who will transform the PDF to PCL and pull off your printer signature (like you had before). [http://blogs.oracle.com/xmlpublisher/2007/11/hard_check_printing.html]

  A final option is to just the signature on the server in the directory $OA_MEDIA. A couple of my former clients who asked for the security of USB/SIMM card eventually just go with this approach, because it was more simple and secure enough for their needs.

  Hope that helps,
  Glen

• Entire XML message mapping to a field in a database table

  I get a message XML of a theme. I want to keep this entire XML message in the database XMLType field. My components are aligned like this.
  
  Adapter for JMS (consumer)-> mediator - DBAdapter
  
  My question is how do I use XSL transformation to the XML message I get the XML type data field. Should I use another approach.
  
  Regarsd
  Thomas

  Sorry for the delay but I wanted to document for you.

  Take a look at this link and see if this meets your use case.

  http://blogs.Oracle.com/middleware/

  see you soon
  James

• Storage and retrieval of XML messages

  Hi all

  I have a table with a column VARCHAR2 (4000) that contains the XML messages as below.  I read these messages using the sub query and then insertion into different tables.  For the 2nd XML message, the select query becomes really big.  I'm more worried about XML messages where I have to type all these path and namespaces etc.  Is there an effective way to store these and then extract them with correct data types?  I might have a chance to change the way these XML messages are generated and then stored in the table.  So I am not limited to the below XML messages.  I use Oracle database 11 g 2 (11.2.0.3).

  #1 XML message

  <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <SOAP-ENV:Body>
      <m:validate xmlns:m="http://abcllc.com">
        <m:Company>01</m:Company>
        <m:PurchaseOrder>673</m:PurchaseOrder>
        <m:POAmount>115875</m:POAmount>
      </m:validate>
    </SOAP-ENV:Body>
  </SOAP-ENV:Envelope>
  

  #2 XML message

  <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <SOAP-ENV:Body>
      <m:insert xmlns:m="http://abcllc.com">
        <m:JournalEntry>
          <m:Status>ACTIVE</m:Status>
          <m:AccountingDate>2009-08-20</m:AccountingDate>
          <m:CurrencyCode>USD</m:CurrencyCode>
          <m:CreatedDate>2009-08-21</m:CreatedDate>
          <m:CreatedBy>JDOE</m:CreatedBy>
          <m:ActualFlag>A</m:ActualFlag>
          <m:JournalType>AP</m:JournalType>
          <m:Company>01</m:Company>
          <m:ProjNbr>064522</m:ProjNbr>
          <m:Task>0061</m:Task>
          <m:CostCenter>6361</m:CostCenter>
          <m:EnteredDR>125.95</m:EnteredDR>
          <m:EnteredCR>0</m:EnteredCR>
          <m:AccountedDR>125.95</m:AccountedDR>
          <m:AccountedCR>0</m:AccountedCR>
          <m:BatchNumber></m:BatchNumber>
          <m:ID>05031</m:ID>
          <m:TransDescription>BOLDT COMPANY</m:TransDescription>
          <m:FiscalYear></m:FiscalYear>
          <m:PeriodEntered>200908</m:PeriodEntered>
          <m:PeriodPosted>200908</m:PeriodPosted>
          <m:Quantity>0</m:Quantity>
          <m:RefNumber></m:RefNumber>
          <m:ExtRefNumber>39000-J68</m:ExtRefNumber>
          <m:POExtPrice>0</m:POExtPrice>
          <m:POLineRef></m:POLineRef>
          <m:PONumber>11158</m:PONumber>
          <m:POQuantity>0</m:POQuantity>
          <m:POUnitPrice>0</m:POUnitPrice>
        </m:JournalEntry>
      </m:insert>
    </SOAP-ENV:Body>
  </SOAP-ENV:Envelope>
  

  Look for the message XML #1

  WITH t AS (
    SELECT xmltype('
  <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <SOAP-ENV:Body>
      <m:validate xmlns:m="http://abcllc.com">
        <m:Company>01</m:Company>
        <m:PurchaseOrder>673</m:PurchaseOrder>
        <m:POAmount>115875</m:POAmount>
      </m:validate>
    </SOAP-ENV:Body>
  </SOAP-ENV:Envelope>
  ') xcol
    FROM dual
  )
  SELECT extractValue(
           xcol
         , '/SOAP-ENV:Envelope/SOAP-ENV:Body/m:validate/m:Company'
         , 'xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
            xmlns:m="http://abcllc.com"'
         ) company,
  
  
         extractValue(
           xcol
         , '/SOAP-ENV:Envelope/SOAP-ENV:Body/m:validate/m:PurchaseOrder'
         , 'xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
            xmlns:m="http://abcllc.com"'
         ) PO,
  
  
         extractValue(
           xcol
         , '/SOAP-ENV:Envelope/SOAP-ENV:Body/m:validate/m:POAmount'
         , 'xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
            xmlns:m="http://abcllc.com"'
         ) POAmt
  FROM t;
  

  Thanks in advance.

  Hello

  Two things:

  (1) do not store the XML in VARCHAR2 or CLOB. Use XMLType, you will benefit from the analysis and storage of optimizations.

  (2) EXTRACTVALUE is obsolete and in any case not be appropriate for this requirement. XMLTable can analyze the document in columns and relational rows.

  e. g.

  SQL > create table tmp_xml of xmltype.

  Table created

  SQL >

  SQL > insert into tmp_xml values)

  2 xmltype ("http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP - ENC = "http://schemas.xmlsoap.org/soap/encoding/" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" container = "http://www.w3.org/2001/XMLSchema" >)

  3

  ' 4 http://abcllc.com ">

  5

  6 ASSETS

  7 2009-08-20

  8              USD

  9 2009-08-21

  10              JDOE

  11              A

  12              AP

  13              01

  14 064522

  15              0061

  16              6361

  17 125.95

  18              0

  19 125.95

  20              0

  21

  22 05031

  23 BOLDT COMPANY

  24

  25 200908

  26 200908

  27              0

  28

  29 39000-J68

  30              0

  31

  32 11158

  33              0

  34              0

  35

  36

  37

  38      ')

  (39);

  1 row inserted

  SQL >

  SQL > select x.*

  tmp_xml 2 t

  3, xmltable)

  4 xmlnamespaces)

  5 by default 'http://abcllc.com'.

  6, 'http://schemas.xmlsoap.org/soap/envelope/' like 'SOAP '.

  7         )

  8, ' /: envelope soap / soap: Body/insert/JournalEntry '

  9 t.object_value passage

  path of varchar2 (10) 10 columns Status "Status.

  11, path AccountingDate date "AccountingDate".

  12, path of VARCHAR2 (3) CurrencyCode "CurrencyCode.

  13, path CreatedDate date 'CreatedDate '.

  14, CreatedBy varchar2 (30) path "CreatedBy".

  (15) x

  16;

  STATUTE CURRENCYCODE CREATEDDATE CREATEDBY ACCOUNTINGDATE

  ---------- -------------- ------------ ----------- ------------------------------

  ACTIVE 20/08/2009 USD 21/08/2009 JDOE

• Help parsing XML message using PeopleCode

  Hi all
  
  I'm new to web services and XML, but was able to consume a WSDL and call the web service successfully.
  
  I am now trying to parse the XML message that I receive as an answer and to retrieve values that I need and with the response analysis problems. Here's what I did and the my AE Test code. Basically, I'm trying to navigate to the 'Results' element in the response, and then use GetChildNode to get the child nodes, then use FindNode to find items and their values.
  
  Here's the WSLD I used to create the web service in PS. I only need WSDL operation doSearch_3_15
  [https://www.epls.gov/epls/services/EPLSSearchWebService?wsdl]
  
  My PC below calls the web service and passes the family name "ZOD" as a search parameter, and this should return 3 results back.
  
  I'm grabbing the response back and analyse to extract the values I need.
  
  + & inXMLDoc = CreateXmlDoc(""); +
  + & ret = inXMLDoc.ParseXmlString (& answer. GenXMLString()); +
  
  The question that I have is to be able to get 'inside' the results node (there are 3 of them) and browse the child nodes and get my values.
  
  AE Test code:
  
  Local channel & charge useful, & responseStr, last;
  Local Message msg & response;
  Local XmlDoc xml & inXMLDoc;
  Local of the array of XmlNode GetElements, RecordList, & field1List & aResultsNode;
  Local XmlNode RecordNode & ClassificationNode;
  Local file & MYFILE;
  
  + & FilePath = ' / psoft/ultimate.9/fpsdv1/prod/ap/files / '; +
  "+ & FileName = uhc_report.xml" +;
  + & MYFILE = GetFile (& FilePath | & FilePath_Absolute of filename, "W", %); +.
  
  + & payload = "<? XML version = "1.0"? "> < doSearch xmlns ="https://www.epls.gov/epls/services/EPLSSearchWebService">"; +
  + & first = ""; +
  + & last = "ZOD"; +
  + & payload = & load useful | "< query > < first >. and first. "< / first > < last > | & last. "< / last > < / query > < / doSearch > ';" +
  
  + & xml = CreateXmlDoc (& payload); +
  + & msg = CreateMessage (Operation.DOSEARCH_3_15, IntBroker_Request %) +;
  + & msg. SetXmlDoc(&xml); +
  
  + & reply = IntBroker.SyncRequest % (& msg); +
  
  If All(&reply) then
  
  If & MYFILE. IsOpen then
  + & MYFILE. WriteString (& response. GenXMLString()); +
  On the other
  MessageBox (0, "", 0, 0, "cannot Open File.");
  End - If;
  
  + & inXMLDoc = CreateXmlDoc(""); +
  + & ret = inXMLDoc.ParseXmlString (& answer. GenXMLString()); +
  
  If & then ret
  
  + & field1List = & inXMLDoc.GetElementsByTagName ("results"); +
  
  If & field1List.Len = 0 Then
  MessageBox (0, "", 0, 0, "GetElementsByTagName node not found");
  Error ("GetElementsByTagName Node not found");
  + / * perform some processing of error * / +.
  On the other
  J = 1 & at & field1List.Len
  If & j > 1 Then
  + MessageBox(0, "", 0, 0, &field1List [&j].) NodeName | " = " | field1List [& j]. NodeValue); +
  
  + & RecordNode = & inXMLDoc.DocumentElement.GetChildNode (& j); +
  If & RecordNode.IsNull then
  MessageBox (0, "", 0, 0, "GetChildNode not found");
  On the other
  + & ClassificationNode = & RecordNode.FindNode ("classification"); +
  If & ClassificationNode.IsNull then
  MessageBox (0, "", 0, 0, "FindNode not found");
  On the other
  + & SDN_TYPE = Substring (& ClassificationNode.NodeValue, 1, 50); +
  MessageBox (0, "", 0, 0, "& SDN_TYPE =" |) (& SDN_TYPE);
  End - If;
  End - If;
  
  End - If;
  -End;
  End - If;
  
  MessageBox (0, "", 0, 0, & inXMLDoc.DocumentElement.NodeName);
  
  On the other
  + / * perform some processing of error * / +.
  MessageBox (0, "", 0, 0, "error.) ParseXml");
  End - If;
  
  On the other
  MessageBox (0, "", 0, 0, "error.) No response").
  End - If;
  
  
  See the link below for the web service XML response with a few Notes message. As a link between the response as an XML doc (had to add .txt to xml extension to download).  I appreciate your help and comments.
  http://compshack.com/files/XML-message.PNG
  http://compshack.com/files/uhc_report.xml_.txt
  
  And here is the result of my AE Test. I'm able to find 3 County results, that I expected because I have 3 files returned from the web service, but fails for some reason, GetChildNode.
  
  results = (0,0)
  
  GetChildNode not found (0.0)
  
  results = (0,0)
  
  GetChildNode not found (0.0)
  
  results = (0,0)
  
  GetChildNode not found (0.0)
  
  Published by: Maher on 12 March 2012 10:21
  
  Published by: Maher on 12 March 2012 10:41

  Hello

  I made a few adjustments to your code.
  First of all you need not create an XMLDOC object on the IB response, since it is already a XML.
  Instead use something like this:

  / * Send & receive message * /.
  & ResMsg = % IntBroker.SyncRequest (& ReqMsg);
  / * Get XMLDOC of the response message * /.
  & xml = ResMsg.GetXmlDoc ();
  strxml = & xml. GenFormattedXmlString();
  / * read the reply * /.
  & aNodeData = & xml. GetElementsByTagName ("yournodename")

  Now your code fixed

  &inXMLDoc = CreateXmlDoc("");
  &ret = &inXMLDoc.ParseXmlFromURL("c:\temp\test.xml");
  If &ret Then
     &field1List = &inXMLDoc.GetElementsByTagName("results");
     If &field1List.Len = 0 Then
        MessageBox(0, "", 0, 0, "GetElementsByTagName Node not found");
        Error ("GetElementsByTagName Node not found");
        /* do error processing */
     Else
        For &j = 1 To &field1List.Len
           If &j > 1 Then
              MessageBox(0, "", 0, 0, &field1List [&j].NodeName | " = " | &field1List [&j].NodeValue);
              &RecordNode = &field1List [&j];
  
              &RecordChildNode = &RecordNode.GetChildNode(&j);
              If &RecordChildNode.IsNull Then
                 MessageBox(0, "", 0, 0, "GetChildNode not found");
              Else
                 MessageBox(0, "", 0, 0, "&RecordChildNode name:" | &RecordChildNode.NodeName);
  
                 &ClassificationNode = &RecordNode.FindNode("classification");
                 If &ClassificationNode.IsNull Then
                    MessageBox(0, "", 0, 0, "FindNode not found");
                 Else
                    &SDN_TYPE = Substring(&ClassificationNode.NodeValue, 1, 50);
                    MessageBox(0, "", 0, 0, "&SDN_TYPE = " | &SDN_TYPE);
                 End-If;
  
              End-If;
           End-If;
        End-For;
     End-If;
     MessageBox(0, "", 0, 0, &inXMLDoc.DocumentElement.NodeName);
  
  Else
     /* do error processing */
     MessageBox(0, "", 0, 0, "Error. ParseXml");
  End-If;
  

  Result:
  PeopleTools 8.51.12 - Application Engine
  Copyright (c) 1988-2012 Oracle and/or its affiliates.
  All rights reserved

  results = (0,0)
  Game number of messages: 0
  Number of messages: 0
  Reason for the message: results = (0.0) (0.0)

  & RecordChildNode name: address (0,0)
  Game number of messages: 0
  Number of messages: 0
  Reason for the message: & RecordChildNode name: address (0.0) (0.0)

  & SDN_TYPE =
  Individual (0,0)
  Game number of messages: 0
  Number of messages: 0
  Reason for the message: & SDN_TYPE =
  Individual (0.0) (0.0)

  results = (0,0)
  Game number of messages: 0
  Number of messages: 0
  Reason for the message: results = (0.0) (0.0)

  & RecordChildNode name: agencyUID (0,0)
  Game number of messages: 0
  Number of messages: 0
  Reason for the message: & RecordChildNode name: agencyUID (0.0) (0.0)

  & SDN_TYPE =
  Individual (0,0)
  Game number of messages: 0
  Number of messages: 0
  Reason for the message: & SDN_TYPE =
  Individual (0.0) (0.0)

  results = (0,0)
  Game number of messages: 0
  Number of messages: 0
  Reason for the message: results = (0.0) (0.0)

  & RecordChildNode name: classification (0,0)
  Game number of messages: 0
  Number of messages: 0
  Reason for the message: & RecordChildNode name: classification (0.0) (0.0)

  & SDN_TYPE =
  Individual (0,0)
  Game number of messages: 0
  Number of messages: 0
  Reason for the message: & SDN_TYPE =
  Individual (0.0) (0.0)

  soapenv:envelope (0,0)
  Game number of messages: 0
  Number of messages: 0
  Reason for the message: soapenv:Envelope (0.0) (0.0)
  Application Engine TEST_AE program ended normally

  Find the differences :)

  Published by: Hakan Biroglu on March 12, 2012 19:22

• Behavior of the XML in Flex vs Flex/AIR class

  Hi, I created a small application without AIR which simply wraps the text value of a TextArea in a XML tags using the XML class (and the 'escape()' function) as shown in the attached code (see "application not PNEUMATIC").
  
  The resulting XML is as follows (when seen in the debugger and recorded by the PHP script):
  < list >
  < element >... .text value of TextArea... < / point >
  < / list >
  
  In my real application, I then sends this via an HTTPService to a PHP script on my server. The PHP script receives the XML code in its entirety, no problem.
  
  When I wrote an equivalent (same code) AIR application (see "AIR Application" in the attached code), the XML formatting becomes (when seen in the debugger and recorded by the PHP script):
  < list >
  & lt; point & gt;... text value of TextArea... & lt; / point & gt;
  < / list >
  
  When you send this through the HTTPService, the parent < list > tag is removed, which causes the PHP script to fail.
  
  Is this a normal behavior and is there a way to get around this? I looked in the forums, but any reference to this strange behavior between AIR and no AIR Flex change is not found.
  
  Anyone else has the same problem?
  
  Thank you
  
  Marc
  
  

  Hi rtalton and thanks for the thoughts. This got me thinking about how the XML class constructor and appendChild methods should be called and found the question.

  It seems that appeal to the "appendChild" method AIR produces a result different than when not in the AIR, which is curious in itself.

  However, I changed my code to be 'good' according to the documentation, and it worked under AIR and airless. Here's what I changed:

  The appendChild method is now called as follows:

  list.appendChild ({escape (taText.text)});

  The quotes have been removed and I'm dealing is no longer the XML as a string.

  So, while I was there, I changed the call to the constructor as follows:

  list = new XML ();

  Same here, no longer treat the XML as a string.

  Thank you

  Marc

• Smartphones blackBerry how can I fix this error: "The XML is not well-formed."

  What is this error?  "The XML is not well-formed."

  I was always able to access the site of ringing in the AT & T Mall until today.   All of a sudden, I get the error XML, as shown above.

  What is it?  How should I do?

  You change the option in the configuration of the browser for something other than blackberry.  You can change it to Internet Explorer or Firefox.  I've noticed this problem when I try to access my Bank Web site and the web address think that it is accessed from a blackberry browser and not a general public.  Now when you download things like themes that you get from a site of third party... where they send you a txt message to click on a link you must replace blackberry.  Here are the instructions for how to do this:

  Open the browser

  Click the button (Menu) Blackberry

  Scroll down to Options

  Click on the browser Configuration

  Under the browser Indentifcation change to Internet Explorer or Firefox

  Then try again ringtone site.

  Let me know if it works

  Thank you

  PBKolsun

• How to add the warning message when you use the function 'print' in Adobe LiveCycle Designer

  I'm trying to make the pdf document for my business that requires the addition of a warning message while everyone to use the function 'print' page...

  Does anyone know how to add the warning message about LiveCycle Designer

  Also my supervisor mentioned something using "nag" If that sounds at all

  Not in the XML code, in the case of script of pre-publication of the "print" key. If you don't have the script editor to the top on your version of designer, you can press ctrl + shift + F5 to bring it.

• JDev 10.1.3.4: How to customize the validation message?

  Hello
  
  I am using JDeveloper 10.1.3.4 and want to customize validation error message but don't know how. Also, the error message is triggered off the base and needs fixing.
  
  On my page, I have a group of two radio button is set to required = "true", a message is added, and the two buttons and the error message are placed in a grid of three-column table:
  

  <h:panelGrid columns="3"
               binding="#{backing_student_doValidation.panelGrid1}"
               id="panelGrid1" frame="none">
  <h:selectOneRadio binding="#{backing_student_doValidation.selectOneRadio1}"
                    id="selectOneRadio1" required="true">
    <f:selectItem itemLabel="I Agree" itemValue="agree"
                  binding="#{backing_student_doValidation.selectItem1}"
                  id="selectItem1"/>
    <f:selectItem itemLabel="I Disagree" itemValue="disagree"
                  binding="#{backing_student_doValidation.selectItem2}"
                  id="selectItem2"/>
  </h:selectOneRadio>
  <h:message for="selectOneRadio1" errorStyle="color:rgb(255,0,0);"/>
  </h:panelGrid>

  When none of the buttons is selected, the validation error message is:
  

     O I Agree   O I Disagree   Validation Error: Value is required

  that is not quite user-friendly. I want the message to be: "you have to either agree or disagree. But how?
  
  Another problem is that the error message is triggered. What may be not presented above, is that this error is emitted above the buttons as if the error message is surrounded by the Exhibitor tag: imagine < font size = "2" > < sup > Validation error: it takes value negative > < / police >. I tried several (middle, base, low) values for the vertical-align property of the panelGrid but none has no effect. Is there a way to fix this?
  
  Thank you!
  
  
  Newman

  Hello Newman,

  It is strongly recommended to use the xml format of the jsp that is jspx. It's good to move to this format for all of the examples you will find only in this format. JSPX has nothing to do with panelPage or ADF Faces components. You can use pure standard JSF
  jspx format components. But I would suggest that you use ADF Faces components since they are compatible JSF and they provide the enriched functionality. Or you can freely combine JSF components and standard ADF Faces or even if you like another set of compatible
  You can import the tag library and also use JSF components.
  To return to your use case. Using the af:selectOneRadio instead of f: selectOneRadio component you can solve the problem with customization of message required validation by using the requiredMessageDetail property, but you will encounter :) problem of position of this message

  Kind regards

  Branislav

• How can I buy tokens to play poker zynga with an ITunes gift card that I download on my ITunes store account. the system on my IPhone gave me the following message "your purchase cannot be completed, to contact Itunes support support a.

  How can I buy tokens to play poker zynga with an ITunes gift card that I download on my ITunes store account. the system on my IPhone gave me the following message "your purchase cannot be completed, to contact Itunes support support on this Web site, www.apple.com/support/itunes/ww/.

  Click here and ask for help from the staff of the iTunes Store.

  (145085)

• I would like to know how to prevent messages sent to be registered on the SMTP server

  Currently, my Thunderbird client saves a copy of all messages sent to the folder "sent", as expected. All sent messages are also stored on the Server SMTP (G-Mail in this case). To avoid having to delete them manually, I want to warn the outgoing message to be stored on the SMTP server in the first place. Currently, my account of Thunderbird for Copies and folders settings has a check mark next to the option 'Other' with a destination of the folder option sent in Thunderbird. I don't see any other parameters that could control how sent SMTP mail server handles. I use the POP service only with the G-Mail Server. What settings should be in place to prevent messages accumulate in the folder "sent" on the SMTP server account?

  I think I can now answer my own question! The question turns out to be a g-mail not delivered not a factor controlled by Thunderbird.

  Apparently g-mail can automatically a copy of all mail sent by SMTP service one account. It's a "feature" that cannot be disabled! A workaround seems to be to set up a filter in g-mail account settings for all mail with an address corresponding to your own email address and send the message to the trash folder. Items in the Recycle Bin are automatically deleted after 30 days. Google prevents the rule 30 days being modified by measure of security, but at least trashed messages for irrevocably removed in a month.

• How can I get rid of the annoying message Sync at the bottom of my Firefox page as I am not interested in sync

  I would like to no longer receive the synchronization message please. He keeps returning to my browser page

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB