OSB: Mail Proxy Service retrieve only the xml message that has of the

Similar Questions

• Hello, I just bought a new windows 7 service pack 1 than my windows that has been said in the laptop it was not authentic, but I bought a 64 bit instead of 32 can I use a 64-bit on my laptop

  bought a new windows 7 service pack 1 as my windows that has been said in the laptop it was not authentic, but I bought a 64 bit instead of 32 can I use a 64-bit on my laptop

  my laptop is a lenovo

  On Sunday, October 5, 2014 12:59:11 + 0000, dougdgp wrote:

  bought a new windows 7 service pack 1 as my windows that has been said in the laptop it was not authentic, but I bought a 64 bit instead of 32 can I use a 64-bit on my laptop

  my laptop is a lenovo

  Depends entirely on this laptop you have. If it has a 64-bit processor
  You can use 64-bit Windows. If a 32-bit CPU, you can't.

  If you don't know you have, hold down the Windows key and press
  Break | Break. It will tell you if you have a 32-bit
  processor or 64-bit processor.

• No matter what xml Vs mail proxy service

  I am bit confused about the difference between any xml service and mail service with the type of request message of XML in osb proxy service config. any help pls?

  Hello

  If you use a load XML in and out, I don't see much difference...

  See here...

  http://docs.Oracle.com/CD/E28280_01/dev.1111/e15866/ui_ref.htm#i1318149

  Service - select this option to create a service that can receive messages from e-mail data, type and respond with messages of a different data type.

  Any Service XML - select this option to create an XML service that does not have an explicitly defined interface and concrete.

  See you soon,.

  Vlad

• How to configure proxy services to use the file transport?

  Hello
  
  I configured a proxy service to query for files in the specified folder. And it is configured to use the file transport.
  
  While running, I get the exception - follwing
  
  
  < 27 April 2012 4:08:28 PM GMT + 05:30 > < error > < WliSbTransports > < BEA-381602 > < error has occurred during the elections of the ProxyService service endpoint resource $ ServiceTypes_SB$ BinaryService: javax.naming.NameNotFoundException: while trying to search for "wlsb.internal.transport.task.queue.file" did not find subcontext "wlsb. Solved "; other name "wlsb/internal/transport/task/queue / '.
  javax.naming.NameNotFoundException: while trying to search for "wlsb.internal.transport.task.queue.file" did not find subcontext "wlsb. Solved "; other name "wlsb/internal/transport/task/queue / '.
  at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
  at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
  at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
  at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
  at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
  Truncated. check the log file full stacktrace
  
  Ask for help to solve this problem.
  
  Thanks in advance.
  
  Concerning
  Shyam.V

  Internal JMS queues depends on OSB are not there for some reason any.

  Are all correctly target JMS servers?

  How did you create the domain and all the managed servers are started?

• How the proxy service can get the client certificate in Oracle Service Bus

  Hello everyone, now I'm confused in how can get service proxy client certificate in Oracle Service Bus. I have configured bidirectional SSL in Weblogic, the client sends its cerficate to Weblogic and Weblogic checks this cerficate if have access permissions Weblogic, but my proxy service cannot obtain this certificate to do more work, who can help me?
  And my proxy service service type is the messaging service.
  
  Thank you!!!
  Sea

  Hi, if you have configured for client certificate authentication, weblogic maps an attribute in the DN of the client certificate to a user of weblogic security realm. The attribute is controlled by the default configuration to map the user in the default identity asserter in the WLS Console--> security--> kingdoms--> suppliers--> default identity Asserter. Generally, the CN attribute is selected for this purpose. You must also create a user in the security field, with the value of this attribute in the client certificate for authentication to succeed. Once the authentication is successful, the user is used as the authenticated user. So if you want to set permissions for authorization on the proxy, you can do it based on this user. For this you need not the certificate of the client. In the pipeline of message, I guess you can get the authenticated user of $inbound, which in turn corresponds to an attribute in the DN of the client certificate.

• Retrieve only the part number of a varchar column using select

  Hi all
  
  I have the type of lines
  GauravSer101
  GauravSer104
  GauravSer106
  Gerard-Ser1789567
  Approve-Ser1789456
  
  in a table.
  
  I need a select statement that returns only the part number associated with specified items, above, so my output should be like this
  
  101
  104
  106
  1789567
  1789456
  
  From this point, it is fixed as characters last few must include numbers. That is to say a finished element always at least one digit.
  
  Can someone please indicate such a select statement?
  I really need to sort items based on the part number are attached to them, not on the entire element.
  
  Kind regards
  Gerard

  3 order of rtrim (translate (lower (col1),'0123456789 ', ' 0000000000'), '0') / / desc
  4, to_number (ltrim (translate (lower (col1), 'abcdefghijklmnopqrstuvwxyz',' @'), ' @')) CSA;

  I would avoid to enter whole alphabet:

  SQL>    select col1,
    2         trim(translate(col1,'0123456789 ',' ')) alpha,
    3         to_number(trim(translate(col1,translate(col1,'0123456789 ',' '), ' '))) num
    4  from   t
    5  order by trim(translate(col1,'0123456789 ',' ')) desc,
    6           to_number(trim(translate(col1,translate(col1,'0123456789 ',' '), ' '))) asc;
  
  COL1           ALPHA                                                           NUM
  -------------- -------------------------------------------------------- ----------
  GauravSer100   GauravSer                                                       100
  GauravSer101   GauravSer                                                       101
  GauravSer102   GauravSer                                                       102
  GauravSer1000  GauravSer                                                      1000
  ApproveSer100  ApproveSer                                                      100
  ApproveSer101  ApproveSer                                                      101
  ApproveSer102  ApproveSer                                                      102
  ApproveSer1000 ApproveSer                                                     1000
  
  8 rows selected.
  

  Nicolas.

• OSB: Security: Business Service: configuration of the password Digest in BS

  Hello

  I have a requirement to connect to the target WS. We pass the user name and password (password digest). The target URL is the same, but we have 7 password different and based on a logic that we need to use any one of the password and call the service.

  I can able to connect to the service by adding headers security and demand from business.

  But when you call the proxy business how do I generate the soap headers with collection of password, Nonce, Timestamp.

  This is the header that I used in BS and it works fine.

  " < soapenv:mustUnderstand wsse: Security = '1' xmlns:wsse = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd ">

  " < wsu:Timestamp WSU: ID = 'Timestamp-13' xmlns:wsu = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd ">

  < wsu: created > 2014-07-08T 22: 28:25.395Z < / wsu: created >

  < wsu: expires > 2014-07-08T 22: 29:25.395Z < / wsu: expires >

  < / wsu:Timestamp >

  " < wsse: UsernameToken WSU: ID = 'UsernameToken-12' xmlns:wsu = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd ">

  user name < wsse:Username > < / wsse:Username >

  " < wsse:Password Type = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordDigest "> passworddigesy < / wsse:Password > .

  " < wsse:Nonce EncodingType =" http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-SOAP-message-security-1.0#base64Binary "> announced < / wsse:Nonce > .

  < wsu: created > 2014-07-08T 21: 23:08.455Z < / wsu: created >

  < / wsse: UsernameToken >

  < / wsse: Security >

  Because the password is different do we need to use several business service or can use only one?

  Please provide your comments.

  Concerning

  Use GOSA username token client_policy at the service of the company. Do not substitute the csf - key in politics and set up a service account PASS-THROUGH at the service of the company.

  No need for multiple business. Let me know if this solved your problem or not.

• E-mail client Windows downloaded only the elements of the yahoo email inbox

  I have configured my client email Yahoo mail with windows account...

  -The problem is it has downloaded all the emails and now my Inbox in the server is empty... I can shoot back (this is just in case I don't make use of customer mail later I don't want to lose my emails)
  -It only downloaded Inbox items... Sent items, other files have not been uploaded

  -Windows Live Mail

  -My other email accounts, it downloaded everything (I'm talking about the other files too) and also gave a copy of it on the server. But it has happened with Yahoo :( He just dropped everything!

  You can import all folders when moving from a mail client to another client of e-mail such as Outlook Express to Windows Live Mail, but not webmail.

  Since you're using WLMail, ask in The Forum Windows Live Mail here.
  http://windowslivehelp.com/forums.aspx?ProductID=15

• How to retrieve only the immediate parent of a member within the business rule

  Hi all
  
  I have the code inside a BR where EntParent is a variable
  [EntParnt] = @PARENT([RTP_Entity]);
  
  Expectation is to return the immediate Parent of the [RTP_Entity] given that is once again a variable and assign it to the variable [EntParent].
  
  The returned value is not the immediate parent, but the beam from the top of the hierarchy (with the Gen1).
  
  Hierarchy of entities, as below.
  
  Entity
  E1
  E11
  F1R1
  E2
  E21
  
  All I want to do is the following:
  Want to save E11 as EntParent if the RTP_Entity is E111
  Want to save E2 as EntParent if the RTP_Entity's E21
  
  Help, please.

  I don't have my friend the accessible Tech Ref right now, but @ANCESTORS is not a level parameter, like @DESCANDANTS?

  Something like @ANCESTORS (param4, 1)? I could be wrong on this one here, but it seems reasonable.

  BTW, have you read the link to my blog? You're practically do what I calll "concentrate of aggregation" - I wonder if you could apply this logic to the dims in the AGG?

  Kind regards

  Cameron Lackpour

• When you try to check my e-mail acct sync, I get an error message that the URL is not valid. When I check the link, everything that comes is http / / and nothing el

  When I check the link all that shows is http / / and nothing else. She does several times. I use Outlook for Windows 8.1. I have not tried the links embedded to see if this is a universal or just isolated problem to this email in particular.

  You can follow the discussion in the bug.

  • bug 1003082 - check/verification link broken in emails for confirming registration accountant Firefox sync if reading mail in Outlook

  Please, do not comment in bug reports
  https://Bugzilla.Mozilla.org/page.cgi?id=etiquette.html

• Windows live mail - so I can only watch old messages on one computer, unless I have export messages to another PC?

  pls see above.

  Those are all stored locally on a single computer if you have a POP3 account.  If you have an IMAP account, then they can be shared and synchronized across computers.  This is also true if you use Outlook.com / Hotmail.  For these questions, you're better off asking these topics here in the forum: http://answers.microsoft.com/en-us/windowslive/forum/email

  Steve

• can I retrieve a text message that has been deleted and have not been saved by I the cloud?

  my phone is a phone 9.1.2.

  My husband also has an i phone and it plugged my iphone into his laptop computer to recharge. an update has started and delete a message that i really recover. where not saved messages and I can't get it back. I contacted my transported mobile and they are unable to help him.

  ecros03 wrote:

  my phone is a phone 9.1.2.

  My husband also has an i phone and it plugged my iphone into his laptop computer to recharge. an update has started and delete a message that i really recover. where not saved messages and I can't get it back. I contacted my transported mobile and they are unable to help him.

  No there is no way to recover data, if it has not been saved.

• How can I recover a message that has been deleted from the Recycle Bin?

  I deleted an email that was sent to the trash. Then, I emptied my trash and want to retrieve this e-mail. Is it possible to do?

  You can try to modify - cancel

  Shortcut Ctrl + z

• HP PHOTOSMART 5520: continually get the message that has no updates

  When I look to the front of the printer itself, it says I have the latest updates installed.

  However, the laptop repeatedly tells me that the recent updates have failed. I have the following message:

  "He had problems installing the updates, but we will try again later. If you keep seeing this and you want to perform an Internet search or contact support for further information, this can help: Hewlett-Packard - imaging - printing - HP Photosmart 5520 series - Null error 08024200 × b. »

  Who should I believe?

  Thank you

  Welcome @glasgowjohn,

  Thanks to their participation in Forums of HP! I see by your post you get a spirit of error of Windows updates. I will definitely do my best to help you.

• Anyone tried the new API subscriptionquery-message that has just been launched?

  I send this message to the ppg (the same url that I send push messages to) in the system eval:

  
  http://www.openmobilealliance.org/tech/DTD/pap_2.1.dtd">
  
    
      
    
  
  

  This is the message I am sending to the ppg (https://pushapi.eval.blackberry.com/mss/PD_pushRequest)

  and for some reason, I get the following error:

  It turns out that the URL was not correct - this request must be addressed to this url:
  "https://pushapi.eval.blackberry.com/mss/PD_cpSubQuery".
  When you use the Eval system.