How to access 'Hidden channel' of the SP that stores transparency?

Similar Questions

• How to access my settings of the webcam for an hp pavilion windows vista any help would be appreciated

  How to access my settings of the webcam for an hp pavilion windows vista any help would be appreciated

  See if a program was installed for him. Or use something like Skype / instant messaging program

• How to get other channels in the channel list.

  Hi experts,

  How to get other channels in the channel list.

  for example

  "Country1, Italy countries2, India, countries3, paris, countries4, scottland, Canada5, rome"

  in the list above, I need to get all the countries and their names separately.

  as countries1, countries2, countries3 countries4 Canada5

  India, paris, Scotland, Italy, rome

  I try the one above in the fashion below

  SELECT SUBSTR

  ("Country1, Italy, countries2, India, countries3, paris, countries4, scottland, Canada5, rome,

  1,

  INSTR

  ("Country1, Italy, countries2, India, countries3, paris, countries4, scottland, Canada5, rome,

  ',',

  1,

  1

  )

  -1

  )

  OF THE DOUBLE

  everything please help me

  If you want the data to be more structured and useful:

  Column collar for a20
  Col col_value to a20

  inlist var VARCHAR2 (2000)

  exec: inlist: = 'Country1, Italy, countries2, India, countries3, paris, countries4, scottland, Canada5, rome;
  exec: inlist: = replace (: inlist,' ')

  Select max (decode (mod(lvl,2), 1, value)) Column
  , max (decode (mod(lvl,2), 0, value)) col_value
  from (select substr (: InList, + 1 start_pos, end_pos-start_pos-1) value)
  lvl
  from (select: InList)
  case when level = 1 then
  0
  on the other
  InStr(:InList,',',1,Level-1)
  end start_pos
  case when instr(:InList,',',1,level) = 0
  then length(:InList) + 1
  on the other
  InStr(:InList,',',1,Level)
  end end_pos
  level lvl
  of the double
  connect by level<>
  )
  )
  ceil(lvl/2) group
  order by 1;
        
  COLUMN COL_VALUE
  ____________________ ____________________
  Country1 Italy
  countries2 India
  countries3 paris
  Scottland countries4
  country5 rome

  Not tested on 10g

  Then you could stragg lines together...

• I would like to know how I can make firefox stop the message that I have to restart my browser to complete the update without having to reboot?

  I would like to know how I can make firefox stop the message that I have to restart my browser to complete the update? I'll restart later, but does not wish to do so immediately. I can
  Click on the cross, but after a few minutes the message is back and I can't figure out how to stop
  It's popping every few minutes.

  You need to restart it.

• How can I get rid of the box that appears when you start Firefox 'Restore previous Session'?

  How can I get rid of the box that appears when you start Firefox 'Restore previous Session'?

  Subject: House is the default in Firefox 4 home page - look at the address bar containing the addresses of web page - it is the container for Google search, with a 'extract container' and below these elements is the Previous Session Restore button. It's not the same homepage that previous versions of Firefox used (although it is similar in appearance), it is a 'local' page that won't load the Internet.

  Set this page as your home page, which is what Firefox 3.6 and earlier versions had for the default home page. He has Previous Session Restore button/link.
  
  http://www.Google.com/Firefox

• Get the error that store is not available now, please try again after some time in Windows 8 Enterprise.

  IM using windows 8 Enterprise.

  When im opening the windows store im getting the error that store is not available now, please try again after some time
   
  Original title: store does not connect

  Hello

  Please, try the Troubleshooting Windows App tool mentioned in the following article and see if that helps:
  http://www.kapilarya.com/download-Microsoft-accounts-Windows-apps-troubleshooters-to-fix-casual-issues-for-Windows-8
  Hope this helps, good luck :)

• How to access some files from the Windows.old folder?

  I recently made the mistake of updating my OS before save lots of interest - information is all the info from Outlook, I had (e-mails, contacts and calendar).

  I have posted a question to the Board of Directors of Windows Vista for the cat, but was recently informed of this discussion here.

  THUS,.

  I was told I could "...". Browse to C:\Documents and Settings\xp_username\Local Settings\Application Data\Microsoft\Outlook and move the pst file in My Documents folder.  It is a hidden file so you will need to activate the hidden files and folders. »

  When I tried to do, I got as much as Windows.old > Documents and Settings > xp_username, but when I click on the "Local Settings" folder, I get a message telling me:

  "C:\windows.old\Documents and Settings Settings\xp_username\Local is not accessible.  Access is denied. »

  I get a similar message when I try to enter in the Application Data folder in the xp_username folder.

  How can I do at this point?  Thank you!

  Try this link:

  Windows Vista junction points
  http://windowsconnected.com/blogs/joshs_blog/archive/2006/09/28/Windows-Vista-junction-points.aspx

  see if your "C:\Windows.old\Documents and Settings of utilisateur\Local Settings\nom" has a shortuct looking for icon. If it changes to the command prompt in the directory that contains the junction point, i.e. "C:\Windows.old\Documents and Settings\nom of user' can do a: dir / a: s *. at the command prompt.

• How to access another library to the user of the account root on mac 10.11

  Hello experts, can you help me please know how to access the library of the user of an account when I am logged in as user root 10.11?

  Open the users folder, and then his home folder, choose go to folder from the Finder menu and provide exactly the library as the path. If you wish, you can put the name of the follow-up folder a / at the beginning of the path instead of double-click this folder.

  (139251)

• How to control each channel of the signals emitted by the generator of digital waveforms?

  Generator has digital waveforms of 8 channels. I need to generate two different signals for HSDIO. How to change and control two different ways? In addition, how to translate pinout of the PXI-6541 to channels? I need pin 1,3,29 and 31 control signal individually.

  Thank you!!

  You need to combine your personal data in a table.  The digital waveforms is simply a numeric representation of the binary table.  It always boils down to bit 0 of each element of the array will channel 0 (or the first string that you specify in creating dynamic channels).  The next bit goes to the next channel.  My last post is very clear.  To display the table in binary, right-click on a table element, then select the display Format, then select binary.  You can also right click on the element, select Visible, then select Radix Show to display the small b before the number.  One last thing, in the display Format window, uncheck the box next to the minimum field width to use.  Then set the digital just below zone 8.  Then select Pad with zeros to the left in the box below.

  You should not use waveforms up to what learn you more about how the HSDIO operates on the input data.  It is not difficult to combine waveforms, but it is not as clear as it is using an array of U8, U16 or U32.

  Trying to explain further.  The first number to be written to the HSDIO will have this effect: Bit 0 (LSB) of the number is written to the first HSDIO string you specify.  Bit 7 is on channel 8, you specify.  If you specify no 8 channels, the bits download ignored.  If wiring in a certain number will produce only a single bit on each channel.  In other words, the number has already combines the bits of all channels that you specify.  Combine you do nothing yourself.  Return to my photo on my last post.  By wiring in a table, you cause a binary model must be generated.

  I hope that is more clear.

• How to access a URL in the BB device 10 Apha

  Hi guys,.

  I want to know how to access the URL of the browser in BB 10, I'm not finding the tab URL, where I can type the URL, any info about BB 10 aplha device will be useful.

  Concerning

  Rakesh Shankar.P

  You have to slide the screen from the top down, from the top of the screen to the bottom of the screen and you will see that the url bar appears again. If you want to enable the preference that the url bar is always visible, there is a toggle switch on the toolbar, you can activate in the opposite State, in which it is currently.

• How to select a channel between the nth character to the nth + 1 character

  Hello
  
  I have a string "SWAP_20120224_MEGAMART_MAR_Sales.csv".
  
  I want to get the chain between second and third underscore concerns underscore, i.e. "MEGAMART".
  How to achieve this in the sql statement.
  
  Thanks for the help.
  
  Concerning

  Hello

  897704 wrote:
  Hello

  I have a string "SWAP_20120224_MEGAMART_MAR_Sales.csv".

  I want to get the chain between second and third underscore concerns underscore, i.e. "MEGAMART".
  How to achieve this in the sql statement.

  One way is to use SUBSTR and InStr.

  INSTR ( str,
        , '_'
        , 1
        , n
        )
  

  Returns the position of the n-th point in str.

  WITH     got_pos          AS
  (
       SELECT     str
       ,     INSTR (str, '_', 1, 2) + 1     AS pos_2
       ,     INSTR (str, '_', 1, 3)          AS pos_3
       FROM     table_x
  )
  SELECT     str
  ,     SUBSTR ( str
              , pos_2
              , pos_3 - pos_2
              )      AS part_3
  FROM    got_pos
  ;
  

  You don't need absolutely the subquery; You can repeat the INSTR expressions as arguments to SUBSTR if you wish.

  In Oracle 10 (and more), you can do ITI with less code, but once again the execution, by using regular expressions:

  SELECT  str
  ,     REGEXP_SUBSTR ( str
                  , '[^_]+'
                  , 1
                  , 3
                  )          AS part_3
  FROM    table_x
  ;
  

  Are you sure the chain will always at least 3 ' _? Everything would change if the channel started by a '_', or the 2nd '_' came immediately after the 1st? Post some sample data (CREATE TABLE and INSERT statements) and the results that you want the data and explain.
  Always tell what version of Oracle you are using.
  See the FAQ forum {message identifier: = 9360002}

  Published by: Frank Kulash on August 9, 2012 09:44
  Correction of errors

• How to access multiple VMs on the network with nic 1 host?

  Greetings,

  I have a server vmware running windows XP with 3 virtual machines in suse. I would like to access the 3 virtual machines from the network at the same time. The vm 3 has their own static ip address. I use the bridge network mode. There is only 1 NETWORK card on the XP computer. With this configuration, I can access only 1 vm the network at a time. When I added an another NIC and jumpered it on a second computer, virtual, then I can access 2 at the same time.  Any ideas on how I can access all the vm 3 at the same time on the network with just 1 NETWORK card?

  Even if you only have a physical NETWORK adapter, you should be able to access all the guests at the same time when they use bridged networking and have a correct IP configuration. Can you put your host IP configuration and your guests so we can check it out. Make sure the guests are really "bridged" and disable all firewall during the test.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• How can access a button inside the video clip

  I have a button named a_btn. This button is located in a clip name a_mc passage. This button is on the first frame. then when you write the code for that:

  function submit(event:MouseEvent):void

  {

  trace ("hii")

  }

  a_mc.a_btn.addEventListener (MouseEvent.Click, Submit);

  his work. but when I keep this button on 2nd chassis or anywhere not in 1 frame inside that movie clip, then I get error runtime as:
  TypeError: Error #1009: cannot access a property or method of a null object reference.
  to NewFlashDocument_fla::MainTimeline / NewFlashDocument_fla::frame1 ().
  How can I access this button on the second picture...

  You cannot reference an object until there are.  Thus, if a_btn is on the 2nd frame of a_mc, you must wait until this 2nd frame plays before trying to refer to a_mc.a_btn.

  If not, put a_btn on the first image and set its visible property to false in the first frame and true as part of the 2nd.  Then you can use your current code and duplicate the design you are trying to achieve by moving the button on the 2nd frame.

• How to access my photos once the trial is over

  Hello, I downloaded Adobe Lightroom on my windows computer. It works fine, but now that the trial is over I can't access my photos that I imported for Adobe Lightroom. I went to the support section and they told me to come here. Can someone please help me get my pictures back. I know they have to be on my computer, because this is the agenda. I do not use creative cloud.

  The pictures themselves are on your hard drive somewhere, at the location put you them, or in the location that you have loaded Lightroom to put. Use the search function of your operating system to search for photos by name.

  I don't think you can open the software to access your changes or other work, except by purchasing a license.

• How to access html files in the folder htdcos of the OHS Server

  Hello
  
  I copied the folder $ORACLE_WT1/SST/htdocs location simple html file (hi.html). I had rebooted the instance of OSH after copying the file.
  
  I can't access this page with the URL http://ohshost:7777 / hi.html. The browser says "the requested page is not found.
  
  But I am able to access the page (index.html) by default without problems. Is that a configuration is required to access the custom in the htdocs directory html pages?
  
  Pls help.
  
  Thank you

  I think you have just the htdocs evil.

  Note that, in your httpd.conf file, the following entry is present:
  -DocumentRoot "${ORACLE_INSTANCE} /config/$ {COMPONENT_TYPE} / ${name} of the component / htdocs".

  in which ORACLE_INSTANCE is something like: / Oracle_WT1/instances instance1 / / (if you have not changed any directory during Setup)
  COMPONENT_TYPE is the OHS and the name of the component is ohs1.

  The directory will be: / Oracle_WT1/forums/instance1/config/OHS/ohs1/htdocs