How to access the sounds?

Similar Questions

• How to access the "Bios" in Vista to change "boot sequence.

  Every time I have to install a new program on Vista, the system won't re - start without the Vista installation disc. I need to know how to enter the "bios" to change the boot sequence. Thank you

  Hello

  / Configuration settings (BIOS/CMOS) often F2 start you so look at the screen - boot order should be set to
  Hard drive 1 for normal operation.

  Sound like you may need to run the repair of booting from the Vista disc.

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try Options recovery or a disk of Vista startup repair.

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Vista disk

  SFC/scannow
  Press enter

  and after that runs away

  Chkdsk /f /r
  Press enter

  (Spaces between C and / k and / and f and /)

  Retry (if necessary) after Chkdsk startup repair.

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• How to access the CLI Mode in cisco sf 302 - 08 p 8-port 10/100 Managed switch

  Hello

  Can someone help me on how to access the CLI mode in cisco sf 302 - 08 p 8-port 10/100 Managed switch. I treid the each method they mentioned in the administration guide. I am not able to enter the command debug mode and comand menu after resetting the default password. Once connected, sound directly to guide me to switch main menu.

  Hello FAL, Mark,.

  Thank you for your participation in the community of support to small businesses. My name is Nico Muselle of Cisco Sofia HWC.

  To access the CLI, you must make sure that the version of the firmware on your switch is at least 1.1.0.73 or preferably higher. Then activate telnet or ssh on the switch and opening of these sessions or a console session you will see that you are in CLI mode. You can return to the console to function menu using the menucommand.

  I hope that answers your questions!

  Best regards

  Best regards

  Nico glacier

  Senior Network Engineer - CCNA - CCNA security

• How to access the info in my iCloud account

  How to access the info in my iCloud account?

  You can access much of the iCloud.com on a computer or through specific applications on your mobile device such as contacts, calendars, iCloud Drive, Photos. What exactly you were looking for and what type of device.

• How to access the bios?

  I am trying to install a new OS, how to access the bios on my HP Pavilian dv8?

  Hello:

  You should be able to access the BIOS by pressing the F10 key as soon as you see the HP welcome screen.

  Paul

• How to access the BIOS on a Pavilion Elite e9237c with mouse and keyboard wireless?

  I have a desktop computer Pavilion Elite e9237 with a wireless keyboard and mouse. I tried to access the BIOS by pressing F10 at startup with no luck, and I can't access any of the other menus for the start-up eiither. I don't have a PS/2 port on my computer, so I can't get a wired keyboard and mouse. Does anyone know how to access the BIOS with this configuration?

  I bought a USB keyboard and he answered in the same way... No bios access. I then studied why it did not work and discovered that it was the way in which he has been connected to the computer. I had initially plugged into a USB hub when he was not working and I moved it directly into a USB port and it works! I plugged my keyboard wireless directly into the USB port and it works too! Thanks for your help... I wouldn't have thought of it if it wasn't for to recommend you the USB keyboard.

• How to access the firefox on laptop Office keeping all the features?

  How to access the firefox on laptop Office keeping all tabs and bookmarks?

  Hello

  You may be able to do this in Firefox Sync configuration on both devices. Please see for detailed instructions.

• Qosmio G30-126 - how to access the bios!

  I have a laptop Qosmio G30-126 and I don't know the key to enter the bios to change real estate for the HARD drive or something... then how to access the bios? What is the key for the bios?

  Hello

  Try pressing the F2 key by turning on the device.
  The Toshiba notebooks supported the ESC and then F1 button
  If these two options are possible

• Re: How to access the BIOS on Satellite Pro A120

  Can someone tell me how to access the BIOS on my SAT Pro A120?

  Hello

  You must press ESC and then F1 key immediately after the laptop has been powered!

  The laptop seems to be to use the Toshiba BIOS and ESC key should be the right one!

  Good bye

• How to access the BIOS on Satellite A110-195 settings?

  How to access the BIOS settings (CPU, video memory ect). I have http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&PRODUCT_ID=1 18639

  At the start when the Toshiba start screen appears press F2 repeatedly and you should be able to enter the BIOS settings.

• How to access the BIOS on Satellite C50-A-1F

  Hey folk,

  A small question:

  How to access the BIOS of my laptop?

  I tried this method and f12, f1, f2 etc.

  Thanks in advance

  Have you ever tried to look for similar issues here in the forum?

  Check this one:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=76740

• HP laptop - 15-ac121dx: how to access the ram on a 15-ac121dx modules

  I want to upgrade the ram in my HP laptop - 15-ac121dx and maybe the hard drive, but I can't understand how to access the ram. There is no access panel, and unlike some other models, it doesn't have a single lever in the battery bay to remove the cover.

  OK, I realized how down low on the laptop.  After watching some youtube videos I came across another HP laptop computer who had screws under the rubber feet and of course there are also screws under the back of two rubber feet, can't believe I didn't think to look under them.

  To get the background you need to:

  1. Remove all the screws on the bottom.  (Must be 12 total)
  2. Remove the drive from DVD (Yes it does not).
  3. Finally, carefully separate the case around the side.

  After that, you should have full access to the slots of RAM and hard drive.

• Satellite A200 - how to get the sound on the TV?

  Hello

  Im trying to set up my laptop through the TV so I can watch videos via my TV, I have the part well display using an S-video cable but I do not know how to switch the sound of the TV/Surround Sound System.

  Someone can give me a guide or helps to do this?

  Thank you

  Merrry Christmas and happy new year

  Very interesting thread about a similar problem that you find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=69026

  Check what Miro wrote and what he uses to get the transfer of audio and video signals to external devices.
  If you still have any questions please let us know.

• How to access the BIOS on Satellite Pro A120

  Sorry for my English.
  But I need help:

  How to access the BIOS on my Satellite Pro A120

  Hello

  If I m not wrong not the Satellite ProA120 is supported by the Toshiba BIOS and so you should be able to access the BIOS pressing the * ESC * key immediately after starting the laptop

• Re: Satellite Pro L450D - 12 X - how to access the recovery partition?

  Hello

  I've formatted Windows 7 with a Windows XP CD but did not setup. I wanted to know how to access the recovery partition to set it by default, everything exists on the laptop right now is Ubuntu, but I don't know, I saw an additional partition that must contain recovery files as laptop did not come with a recovery disk and unfortunately did not create a filter.

  How can I access the recovery partition on the laptop having in mind, I formatted the drive Windows 7 was installed on or should I activate or something like that?

  Any help much appreciated

  Hey,.

  On the second partition of your laptop (data partition), you will find a folder named HDDrecovery and it contains recovery files. The problem is that you can use the HARD drive only with the pre-installed operating system recovery feature. It would mean in your case it s too late now and it s not in use anymore.

  You have created the Toshiba recovery disc as mentioned in the user manual? If Yes, you can use this disk to restore to factory settings. Just boot from this CD and follow the instructions on the screen.

  If you don t have the recovery disc, you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx