How to achieve performance in BPM Studio

Similar Questions

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• Adding an attachment in a single Instance BPM Studio 10.3.1

  Hello
  
  I use Oracle BPM Studio 10.3.1.0 and I am creating a process, where there is an Interactive activity for a role of user to upload a file (for example .doc/docx or .pdf) and once the file is downloaded, another role will be able to download this file to their local file system (in the same instance).
  
  I can't find a way to do this.
  
  I tried FileChooserDemo of this thread, How to use item "FileChooser" on Client files , however I can't find the place where or how to display the download file, or the file itself on the file system.
  
  I use BPM for the first time for a project I was responsible, so if you can answer it please with the right instructions.
  The Oracle BPM server and client are the same machine.
  
  Any help will be much appreciated.
  
  Elina

  Hi Elina,

  Just a few things.

  Be careful with the element "FileChooser. I think you saw an old post of Lilach (Re: find a file where it is discussed.) The file you choose is from your server and not your client. It seems that it's working on your client machine now, but it's because you test using your own machine and is seen as the 'server '.

  Of course you have considered this, but you can use the STANDARD setting for the work item instances that comes with working space.

  Dan

• BPM Studio 10.3.1 - where are my logMessage entries?

  Hi, I am currently viewing messages from debugging in BPM Studio 10.3.1 (standalone), generated with
  logMessage "myMessage" using gravity = DEBUG
  to help debug code PBL. But where can I find the .log file where messages are supposed to appear? Thank you!

  Here is a link that might help: Re: How do I process BPM DEBUG using BPM Studio

  Dan

• Migrate a BPM Studio project to enterprise server

  Hello
  can anyone can help me and explain how to migrate or deploy a BPM studio on the enterprise BPM Server project?
  
  
  Thank you

  Studio, right-click on the project and continue to export. This will give you an .exp file that contains information about the project.

  Assuming that you have correctly installed Enterprise, just open the Task Manager, click projects, select deploy and navigate to the location of your .exp file.

  Its as simple as that!

  HTH
  -Kevin

• Is it possible to transfer videos from the iPod from someone else on my iPhone?  How to achieve this?

  Is it possible to transfer videos from the iPod from someone else on my iPhone?  How to achieve this?

  Depends on the model of iPod exactly.

  If the iPod is supported you can try using AirDrop: How to use with your iPhone, iPad or iPod touch - Apple Support AirDrop

  If this is not the case, there are applications in the App Store that will allow you to send files, including videos taken with the iPod and who reside in the film to other devices.

  https://iTunes.Apple.com/us/app/photo-transfer-app-easily/id365152940?Mt=8

  Photo transfer app allows you to quickly copy pictures and videos from your iPhone, iPad, Mac or PC using your local wifi network.

  You can't send videos that are stored by default Apple video App.

• Toshiba M100 - how to optimize performance?

  I move my Toshiba M100 of XP to Windows 7 after installing 2 GB of ram.

  How to improve performance of my system?

  Hi mate,

  What Toshiba M100 you have? Is it Portege M100, Satellite M100 or what else?

  To improve the performance of Windows, you must defragment the HARD disk, disable all services that you need and turn off all them start up programs you don't need.

  If you ask Google for some tips how to optimize, there is enough! ;)

• Should I upgrade my macbook pro at el capitan 2015? How is the performance on elcapitan? give your opinion! Thank you :D

  Should I upgrade my macbook pro at el capitan 2015? How is the performance on elcapitan? give your opinion! Thank you

  My iMac with 8 GB or RAM 2011 works very well with the 10.11.2 was last updated. It is up to you to decide. It should work perfectly on almost any new machine of 2015.

• How to run XsdObjectGen in Visual Studio 2010?

  I have some classes that were generated with XsdObjectGen in Visual Studio 2005. Now, we're heading Visual Studio 2010.

  Does anyone know how to run XsdObjectGen in Visual Studio 2010?

  If Visual Studio 2010 does not support this tool, what is the replacement tool? But the generated XML classes must be the same, because we have other classes and third party requests for reference for the classes and the XML files generated by XsdObjectGen in 2005 VS.

  Thank you very much in advance.

  Hello

  The question you posted would be better suited in the TechNet Forums for problems of Visual studio. I would recommend posting your query in the TechNet Forums.

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Hope this helps

• How can I perform a recovery of the system for a mini HP?

  Original title: System Recovery.

  How can I perform a recovery of the system for a hp mini?

  Hi waynemeyer,.

  1. why you want to make a system restore?

  2. you have a question about your computer?

  3. you have installed on your computer Recovery Console?

  If you try to restore the factory settings, you will need to contact the manufacturer of the computer for help.

  Contact HP

  Hope the helps of information.
  Please post back and we do know.

• How can I perform a new installation if I don't have an installation or a backup disk. Vista is on my laptop when I bought it and there is no installation disc.

  How can I perform a clean installation on a laptop if I don't have an installation disc? Vista Home Premium was already installed on the laptop when I bought it. Somehow, all of my documents have disappeared and by clicking on the icon start shows not all programs as it did before. The only way that the broadcast of programs is by placing the arrow on "all programs". How this can be corrected and how do I recover lost files?

  Hello

  you do not say what led to losing you your documents

  This would apply to you? :

  read the information at the bottom of the below link about what makes this malware hide your data files and the cure for it regarding

  Read article 17

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

  also follow the correct for that malware removal steps, just to be safe, let's

  _____________________________________________________________________

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _____________________________________________________________

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I had to replace my hard drive and need to reinstall Acrobat Pro.  How to achieve this?

  I had to replace my hard drive and need to reinstall Acrobat Pro.  How to achieve this?

  Hi Roger,

  Please visit: http://www.adobe.com/downloads/other-downloads.html

  I hope this helps.

  Concerning

  Megha Rawat

• Can I import model bpmn of Aris Express in BPM Studio?

  Hello everyone.

  Can I import model bpmn of Aris Express in BPM Studio?

  Not familiar enough with Aris Express, but in earlier versions of the 11g you can use an extension of guardian in JDeveloper to import some different models.

  From PS5 and PS6, it is possible to import without the extension, and this can be done in the BPM project Navigator view.

  Right-click on your BPM application and you can select "import templates", the service supports Oracle Workflow, Visio, guardian and XPDL, which is hopefully a format that allows you to export to Aris.

  It will be useful.

• How can I make Photoshop run faster, or how to increase performance?

  Hello

  How can I make Photoshop run faster, or how to increase performance?

  Help, please.

  Kind regards

  Techvedic

  Nice day!

  Please read this:

  Optimize performance. Photoshop CS4, CS5, CS6, CC

  If you have any additional questions, please read this (specifically"to provide relevant information to get faster answers" "):

  http://forums.Adobe.com/docs/doc-2325

  Kind regards

  Pfaffenbichler

  (edited)

• How to achieve this specific shadow effect?

  Hi all

  Does anyone know how to achieve this effect of specific shadow in InDesign: an instruction step by step, a plugin, etc.?

  

  Kind regards

  Kasyan

  Kasyan,

  I usually just use the base pen. I draw the object with a few clicks of the pen, fill it with whatever color, the hue value if you want, then use the settings more or less as below.

  

  Mike