Emails have been sent, but I was not yet connected to both.

Similar Questions

• Inbox, Outbox and drafts of files that have been deleted, but they do not show in the box of

  My Inbox, sent, and projects files are several hundred megebytes of size. If I check with a hex editor, I find messages that are years old, even though I have specified that messages about six months are automatically deleted. When I look at the files with t-bird, they have only the appropriate showing messages. I would like to be able to recover disk space. How can I do?

  I have t-bird 31.5.0, enigmail 1.8, lightning 3.3.3 running on SUSE 3.1

  When was the last time you compacted your folders?

• Emails can be sent, but they are not received by the people they are sent to.

  people don't get do not email

  people do not receive my emails even if they do evidence sent and do not stay in my Outbox - why this

  Send yourself and see if you get the message.  Also, see if you can access your e-mail account via webmail and see if outgoing messages are received from webmail.  You can also contact your mail service provider and ask them.

  Steve

• have been sent an email but we didn't come in my box of reception or any other file or folder

  have been sent an email on May 8, but it didn't in my box of reception or any other file or folder. I know with certainty that it was sent to me that I was on the mailing list, and got everyone but me... Please help as it is an important email

  Contact the sender and have the email sent again.

• Yes, said "some files needed to accurately preview this page have been changed but not saved." Save now? "(Was: Question about possible...)"

  I said 'yes' to a box with a question that came

  ' Some files needed to accurately preview this page have been changed but not saved. Save now? "

  I had already experienced with the creation of text boxes (divs?) and what makes them different colors so I could see the difference, but now I managed to transform not only one, but ALL of my precious site pages in pink pandemonium - how can I fix it despite the fact that the coding is very well and does not correspond to what I have now on my pages... An example is attached...

  I have what looks like a bug, because it affects all pages.

  

  Sounds like the file that your linked css file save you when you are prompted. Only one css file that is linked to all pages would change all your web pages. You will then need to open that and then make the changes in this file in contrast to those that you saved by mistake.

  I suspect that you used the Panel css Design to make your css revisions in order to revert the changes through that and then save the css file.

• I can't open my emails or folders. I have new messages, but they will not open when I try to open them.

  I can't open my emails or folders.  I have new messages, but they will not open when I try to open them.  It says LOADING but it is right here does nothing.  It started about 10 days ago.  It also will not open a file I put in place.

  original title: I can't open my emails or folders.

  Hello

  I suggest you to contact MSN support center and check out.

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

• I have version 6 Creative Suite Design Standard disc. When I tried to install the software on my new laptop, several components have been installed, but Acrobat and Illustrator were not. The system returned the following message: "Adobe genuine software c

  I have version 6 Creative Suite Design Standard disc. When I tried to install the software on my new laptop, several components have been installed, but Acrobat and Illustrator were not. The system returned the following message: "Adobe genuine software check failed." The product you want to install is not genuine software remains, and seems to be counterfeit. Please report a piracy or contact customer support for assistance. This is the drive I bought from Adobe and running on my old laptop. I have the right product and serial numbers, which allowed me to install several other components of the software.

  Warning: "Adobe software real failure of Validation...". » | Windows

• I'm not good in English so please use English very easy. I downloaded a first pacifier (30 days) pro and I can find it where I can remove programs, but I can't find the program anywhere. I searched on his record, but he was not first pro. do I have to d

  I'm not good in English so please use English very easy. I downloaded a first pacifier (30 days) pro and I can find it where I can remove programs, but I can't find the program anywhere. I searched on his record, but he was not first pro. What should I do?

  This is a double post of:

  I'm not good in English so please use English very easy. I downloaded a trial (30 days) first pro and I can find it where I can remove programs, but I can't find the program anywhere. I searched on his record, but he was not first pro. do I have to d

• I'm not good in English so please use English very easy. I downloaded a trial (30 days) first pro and I can find it where I can remove programs, but I can't find the program anywhere. I searched on his record, but he was not first pro. do I have to d

  I'm not good in English so please use English very easy. I downloaded a trial (30 days) first pro and I can find it where I can remove programs, but I can't find the program anywhere. I searched on his record, but he was not first pro. What should I do?

  + I use windows and 32-bit computer

  If your computer is 32-bit, you can not install first pro. It is 64-bit only: system requirements | Adobe Premiere Pro

• Error of TCP connection when sending MODBUS for WAGO controller 750-881 orders after 113655 bytes of data have been sent

  Hi all

  I'm new in the world of labview and trying to build a VI that sends commands to a controller of the WAGO 750-881 at regular intervals of 10 ms.

  To set each of the WAGO comics at the same time, I try so to send the Modbus fc15 command every 10ms using Labview standard TCP write module.

  When I run the VI it works for about a minute before receiving an error message 56 telling me the TCP connection has expired. This strange thought, I decided to record the number of bytes sent via the TCP connection while running the program. In doing so, I noticed that the link broken after exactly 113655 bytes of data have been sent each time.

  Thinking can I have sent too many messages, I increased the delay of the loop of 10ms to 20, 100 and 200 ms, but the error remained. I also tried to play with the TCP connection timeout and the writing TCP timeout, but none of these had no effect on the problem.

  I do not see why this error occurs, such as the program works perfectly up until what brand 113655 bytes.

  I've attached a screenshot of the base VI (simply showing a MODBUS command sent every second) and a more advanced VI (where I am able to control each of the WAGO manually by setting a frequency at which the DO is to switch between ON and OFF).

  If anyone has any ideas on where the problems lie, or that I could do to debug more program this would be greatly appreciated.

  AvdLinden wrote:

  Hi ThiCop,

  Yes, the error occurs after exactly 113655 bytes each time. Time-out control, I would like to use is 10ms, but even that will rise to 1 s or 10s does not error, which leads me to believe that's not the issue (as well, do not add any delay in the while loop, so let it run at the maximum speed showed that the TCP connection is able to send all the bytes 113655 in less than 3 seconds again directed towards control of time-out) is is not the issue here).

  I tried the suggestion of Marco but having difficulty to translate the string returned in a readable string (rightnow the answer given is "-# +" ' ").

  As for your second suggestion, I've implemented something similar, where I created a sub VI to establish a TCP connection, send a message and then close the connection. I have now to build each message and then send the string to the Subvi, which sends the command to my application successfully. While not the most elegant method to solve the problem, it solves the problem of time-out, which means that I am able to send as many orders as I want. So in this sense, the problem has been resolved.

  If you have advice on how to properly read the TCP read the output, I want however to see if I could not get my first program to work because it is slightly more robust in terms of timing.

  MODBUS RTU TCP is a binary protocol, as you show in your base VI, where you put in the form the data stream using byte values. So you have to interpret the returned answer accordingly with the Modbus RTU spec in the hand. Now what is probably happening is that the connection is suspended after a while because you do NOT read data from the device sends as response to your commands. The TCP/IP stack cushions these bytes and at certain point of overflow internal buffers and the connection is blocked by the battery. So to add playback of TCP in strategic locations (usually after each entry) is the right solution for this. Is there a reason any that you do not use the PROVIDED Modbus TCP library?

• Win XP (32-bit) with iTunes 12.1.3.6: iPod Nano A1320 16 GB error: an iPod has been detected, but it could not be identified properly.

  I have the following environment:

  Win XP SP3 (32 bit)

  iTunes 12.1.3.6

  iPod Nano A1320 16 GB (5th generation)

  I get an error when I try to connect my iPod Nano A1320 16 GB (5th generation):

  An iPod has been detected, but it could not be identified properly.

  Please disconnect and reconnect the iPod and try again.

  If the problem persists, uninstall iTunes and then reinstall iTunes.

  I tried my other iPod Nano A1320 16 GB (5th generation), and it gives the same error.

  I looked at other similar positions with this error message and tried their solutions, but none of them does not seem to work.

  However, my iPod Nano A1285 8 GB (4th generation) is recognized by iTunes 12.1.3.6.

  Any suggestions? Thanks in advance for your help.

  Since it's Windows XP, it's maybe the old problem of the "drive letter".  Being a Mac user, I don't know the exact procedure, but try changing the drive letter of the iPod.  Maybe that's how

  Change the drive letter for iPod

• Had computer problems, they have been corrected, but I have no sound icon on the toolbar. How can I get an icon?

  Had problems with my computer, they have been corrected, but I have no sound icon on the toolbar. How can I recover this icon?

  Control Panel > wounds etc. > display the icon in the systray (or similar) is checked.

  If for any reason any who does not, re-post giving error messages that may appear when you try to play a song or video.

  See you soon,.
  Jerry

• Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

  Original title: windows updates 7

  Updates to the computer have been OK until MS net framework has been improved from 3.5.1 to Ms. Net framework 4 who do not go in. several attempts have been made to install but still got error codes. . Since then, updates only install are removals of malware. Silverlight will not install either.    Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

  I am at a loss... Anly help would be welcome.

  1. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder.
  2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow.

  Press enter

  3. open Control Panel > Windows Update and Windows 10 should begin to download...

  If this does not work:

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• Hello yesterday I bought photoshop elements 14, regularly paid, but I was not allowed to download, telling me to wait at least 24 hours. Today in my account has no effect. Now to download everything as I do, I do even not license numbers. That

  Hello yesterday I bought photoshop elements 14, regularly paid, but I was not allowed to download, telling me to wait at least 24 hours. Today in my account has no effect.
  Now to download everything as I do, I do even not license numbers.
  Thank you

  Your serial number appears on your account page?

  https://Accounts.adobe.com/ , then click on Plans & products top

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• I signed up for a subscription, but I was not able to convert my pdf to Word

  I signed up for a subscription, but I was not able to convert my pdf to Word

  Hi elizabethc86184573,

  Try to use the https://cloud.acrobat.com/exportpdfonline service, make sure that you are connected using the Adobe ID, in which you have the subscription.

  Kind regards
  Nicos