How to add a text anchor point

Similar Questions

• How do Center you a text anchor Point?

  I want that all my text anchor points to Center in the middle of my words.

  By default, they remain in the lower left corner.

  Do I have to manually replace each of them with the transformation > setting the anchor every time?

  TEDIOUS.

  Is there no other way?

  You are not people of layout page or graphic artist so that perhaps you happened, but there is something that is called the vertical offset and I think this came there very long.

  Here's a small snapz pro easier film then show me to write.

  http://mysite.Verizon.NET/wzphoto/baseline.mov

• Align to the left the text anchor point in After Effect

  Hello. Sorry if this question was very noovy, but I need left align multiple layers of text. So, I want to put my on board left the text anchor point. Because I need to be able to change the text and get the same effect, I would like to place the anchor point on the left edge by using an expression.
  

  I used something like
  

  x = 0;
  

  Y = this.sourceRectAt () .height/2;
  

  [X, Y]
  

  However, small, apparently random offset is throw me off. How can I align my text anchor point to the left edge?

  Thanks in advance!

  Yes... I created a font that has 0 left/right bearings, and it worked perfectly.

• How to add simple text to document programmly?

  Can not know. How to add simple text to document programmly? Could not find any information on this subject in Communication monitor QAnywhere.

  OK, I got it. In this case the text form is better :-) Thank you!

• Text anchor point / alignment

  I have a form and a text;

  • Real text "sourceRectAtTime()" expression in the shape size, be equal size in pixels. It's not the size in pixels appearing in the box (nominal pixel size) Chacterer.
  • Need to keep the text at the top of the form aligned.
  • I have the assurance that text and shape properties were:
  • COMP = 1280 x 720
  • Text and shape:
  1. Achor Point [0,0]
  2. Position [640 360] (average size of Comp)
  • I was expecting to see the text on the shape, perfectly aligned.

  

  But the value of the anchor to the shape does not match the text.

  '0' for the text is = Middle width and low height.

  '0' for the shape is = width mid to mid height.

  Yes, I can drag text to the alignment of the form.

  Actually, the problem isn't height. No anchor point. But in the wide Position. Why, when I change the text, changes the situation there. Quick glance:

  

  When I change the text with Anchor Point is correct, still in the Center, but the position became misaligned. The text leaves the position of the shape, going to the right.

  This should happen due to variations in the width of the letters, the "sourceRectAtTime()" expression is extremely sensitive to the letters. "

  When I drag it to the correct location looks like this:

  

  Except that I can't be slippery, I need everything for always, snaps. Even if I change the text.

  How to solve this problem?

  Update: Please, note that if I put some 'symbol', the largest in height it is also doubtful:

  

  Try this. For the size of the rectangle (works the same as you, I think):

  r = thisComp.layer("TEXT").sourceRectAtTime (time, false);

  (r.width, r.height)

  For the position of the text layer:

  L = thisComp.layer("Rectangle");

  Rect = L.sourceRectAtTime (time, false);

  hisPos = L.toComp ([rect.left+rect.width/2, rect.top + rect.height/2]);

  Rect = sourceRectAtTime (time, false);

  myPos = toComp ([rect.left+rect.width/2, rect.top + rect.height/2]);

  value - (myPos - hisPos)

  Dan

• How to add a text box gradient to an image

  Rather than try to explain it that I would get help... I will attach a photo instead (lower part). How I got above a text box while she slightly superimposed on the background of an image? Thanks in advance.

  

  Put the gradient (I used the first transparency plan) under the text layer.

  In order to clarify the procedure:

  1. Add a layer above the image.
  2. Choose the foreground color (I've tasted blue markers in the foreground).
  3. Select the gradient tool.
  4. Look in the foreground to the transparency of the Options bar.
     
  5. Place the tool gradient at the bottom of the image and move about a third of the way up.
  6. Add the text on top

• How to add Alt text to slideshow in Muse

  Hello

  I am a newbie to Muse.  I learned how to add text to individual images alt, but my question is about images in a slide show.  I used the widget to create a slideshow.  I have images for slideshows in a folder.  But I don't know how to add alt-individual text to each image in the slide show.  Any help appreciated.

  TIA

  Earl

  The text should not display at all! It is intended for users who cannot see the pages and to help intentionally exposâmes it of all visitors to the web site: the search robots Google !

  Most browsers use the alt or the ToolTip as an indicative popup text, but it is not a guarantee or obligation. So if they decide not to do with images that are buried in deep in the HTML code (such as the slide show), they might overlook it.

  Add alt text and ToolTips. Adobe Muse CC tutorials

• How can I move two anchor points overlapping of distinct objects at the same time?

  Please refer to the picture for clarification:

  Pink and blue objects in the image are distinct forms that have the same number of vertices/inkings. The forms have been generated with ArcGIS and exported to a. File to HAVE it. I need to move the anchor points of these two forms, so that they create a trail that follows the outline of the layer of the topography, but it seems that I can only move the anchor of a shape at the same time. Is there a way to pass the two anchors both (anchors that overlap, one of each shape)?

  I should also add and subtract some of the anchor so while making it so each anchor is not a 'corner '.

  I want to essentially merge or merge the anchor points of the two forms while maintaining the two colors, so that they share a border.

  Any help will be a life saver! I can try to clarify if it is not supposed. Thanks in advance!

  -Jake

  Jake,

  You can click on selection of object through only in preferences, then after the first deselect all ClickDrag (click outside paths) with the tool directly on each game Selection and then ClickDrag to move (you can simply go to set).

• How can I change the anchor Point?

  Hi, I'm new to the premier pro, Ive imported a vector of illustrator (a COG) I need to make rotation/rotation continuously in one place, the problem is the area bounding around her is huge and the GdG is not at the Center, the anchor is the way so when I turn it it wobbles around. An ideas? Thanks in advance

  Post edited by: Kevin Monahan

  Reason: The title was too long

  Currently, the only way to do this is to:

  1. Place the graphic in a sequence.
  2. Select the graph in the sequence and open the effect controls panel.
  3. Whirlpool open the motion effect and adjust the anchor Point property by dragging the X and coordinate hot text.
  4. You may need to adjust the Position property to place the graphic where you want, because it will pass like you most the anchor Point property.

• How to align objects to anchor points for towing towing?

  Hello.

  I need align two objects by two anchor points within the framework of selection of objects. How can I do?

  

  Ivan,

  Your options may depend on version; the following work overall.

  Especially if you want to be able to do it easily and for free, you can:

  (1) for each star, create a circle of nostroke/nofill (or rectangle) with a larger box enclosing;

  (2) the center of the circle on the anchor in question;

  (3) select the circle and star (you can combine them).

  After that, you can use Align and either move as you wish (towed by its towing anchor point). When (you're sure it's) done, you can (separate and) remove circles if you wish.

  It would be nice with a script or something that allows specific movements based on an anchor Point. Maybe someone already did.

• How to add a text box to the pdf format, so that others can fill

  How can I insert text in PDF nightclubs as well as others can fill it when it is sent to them?

  Hi susansln123,

  Refer to this KB document for help Acrobat help. Forms.

  Kind regards
  Nicos

• How can I create text anchors?

  Hello

  I can not find a way to do it and have tried to look through online resources, manuals, etc... goal I want to design a newspaper that will have multiple pages and want to get a few items per page and keep them in the following pages.  It's will for a printed copy.  It seems I need anchor text but don't know where to start.  Any help?

  THX.

  The term for what you really need is "Threaded" text blocks, where the story flows from one image to the other. Threaded frames can be on the same page or different pages, but must be in the same document. You can read about the threads of text in the help files, or get a good book beginning as Visual QuickStart Gide of Sandee Cohen to InDesign.

  To jump, you want to add additional images that affect the threaded frames and lines in these new mounts you will add whatever jump text you want with a special character marker next Page or previous Page marker. Current Page marker characters point out the number of the page on which they appear, but the markers next and previous, when, in a setting that affects a threaded, setting report page on sur laquelle which the image next or previous, respectively, in the current thread, is located.

• How to add a text in an ark and change the perspective of the letters

  There is a way to get this text arch with the guy on the path tool or someone can help me and let me know how I can make this text in Adobe Illustrator

  

  vduron,

  You can:

  (1) create a circle where you adopt the basic letter;

  (2) in the paragraph palette, set to center align;

  (3) in the character palette, set the size of police desired;

  (4) with the path text tool (text tool ClickHold until you see the other (s) fly, click on the upper anchor of the circular trajectory of 1) and start typing.

  You can set the vertical offset of the character palette (you may need to click on the arrow for the options), and you can adjust the font size.

• How to add buttons/text to the component right when the selection is made from the left pane

  Hello
  
  I am new to the JAVA swing development.
  
  I am creating an application where in the pane on the left, there is a tree Menu and in the right pane, I have a few buttons. In view of the options in the left pane, I should be able to add more buttons and or the text to the right pane.
  
  How to achieve this? If you guys have any example code, please post or suggest ways to accomplish.
  
  Thanks in advance.
  user2325986

  It seems that you declare leftPane, rightPane and different main_Frame and have too much static and final elements. Look at the code below. I put GridBagLayout to the framework for a better look.

  I don't know what you mean when you say that you only want to right panel and you want to add. Also, I think you'd be better off using CardLayout to right panel as stated jduprez

  When you want to display using code {_code_} code here {_code_} (code in parentheses without underscores) tags

  Here is a working example of what you had:

  import javax.swing.*;
  import javax.swing.event.*;
  import java.awt.*;
  import javax.swing.tree.*;
  
  public class Main
  {
      public static void main(String[] args)
      {
          main_Frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          main_Frame.setVisible(true);
      }
  
      public static TestFrame main_Frame = new TestFrame();
  }
  
  class TestFrame extends JFrame
  {
      public TestFrame()
      {
          setTitle("Test Frame");
          setSize(500, 500);
          setLayout(new GridBagLayout());
  
          leftGBC = new GridBagConstraints();
          leftGBC.gridx = 0;
          leftGBC.gridy = 0;
          leftGBC.fill = leftGBC.BOTH;
          leftGBC.weightx = 10;
          leftGBC.weighty = 100;
  
          rightGBC = new GridBagConstraints();
          rightGBC.gridx = 1;
          rightGBC.gridy = 0;
          rightGBC.fill = rightGBC.BOTH;
          rightGBC.weightx = 100;
          rightGBC.weighty = 100;
  
          leftPanel = new JPanel();
          leftPane = new JScrollPane(leftPanel);
          leftPane.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
          leftPane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
  
          rightPanel = new JPanel();
          rightPane = new JScrollPane(rightPanel);
          rightPane.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
          rightPane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
  
          DefaultMutableTreeNode root = new DefaultMutableTreeNode("main_Tree");
          DefaultMutableTreeNode Branch1 = new DefaultMutableTreeNode("Branch1");
          DefaultMutableTreeNode Leaf1 = new DefaultMutableTreeNode("Leaf1");
          root.add(Branch1);
          Branch1.add(Leaf1);
          DefaultMutableTreeNode Branch2 = new DefaultMutableTreeNode("Branch2");
          DefaultMutableTreeNode Leaf2 = new DefaultMutableTreeNode("Leaf2");
          root.add(Branch2);
          Branch2.add(Leaf2);
          JTree tree = new JTree(root);
          tree.setRootVisible(true);
          tree.setShowsRootHandles(true);
          tree.getSelectionModel().setSelectionMode(TreeSelectionModel.SINGLE_TREE_SELECTION);
  
          tree.addTreeSelectionListener(new TreeSelectionListener()
          {
              public void valueChanged(TreeSelectionEvent se)
              {
                  JTree tree = (JTree) se.getSource();
                  DefaultMutableTreeNode node = (DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
                  if (node == null) return;
                  String nodeInfo = node.toString();
  
                  if (nodeInfo.equals("Leaf1"))
                  {
                      rightPanel = new JPanel();
                      rightPanel.add(label);
                      Main.main_Frame.remove(rightPane);
                      rightPane = new JScrollPane(rightPanel);
                      rightPane.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
                      rightPane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
                      Main.main_Frame.add(rightPane, rightGBC);
                      Main.main_Frame.validate();
                      Main.main_Frame.repaint();
                  }
  
                  if (nodeInfo.equals("Leaf2"))
                  {
                      rightPanel = new JPanel();
                      rightPanel.add(Jbt2);
                      Main.main_Frame.remove(rightPane);
                      rightPane = new JScrollPane(rightPanel);
                      rightPane.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
                      rightPane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
                      Main.main_Frame.add(rightPane, rightGBC);
                      Main.main_Frame.validate();
                      Main.main_Frame.repaint();
                  }
              }
          });
  
          DefaultTreeCellRenderer renderer = (DefaultTreeCellRenderer) tree.getCellRenderer();
          tree.setRowHeight(30);
  
          renderer.setLeafIcon(new ImageIcon("blue-ball.gif"));
          renderer.setOpenIcon(new ImageIcon("red-ball.gif"));
          renderer.setClosedIcon(new ImageIcon("yellow-ball.gif"));
          renderer.setFont(new Font("Monospaced",Font.BOLD|Font.ITALIC,15));
          renderer.setTextNonSelectionColor(Color.blue);
          renderer.setTextSelectionColor(Color.white);
          renderer.setBackgroundNonSelectionColor(Color.white);
          renderer.setBackgroundSelectionColor(Color.gray);
          renderer.setBorderSelectionColor(Color.lightGray);
  
          leftPanel.add(tree);
  
          add(leftPane, leftGBC);
          add(rightPane, rightGBC);
      }
  
      private JPanel leftPanel;
      private JPanel rightPanel;
      private JScrollPane leftPane;
      private JScrollPane rightPane;
      private GridBagConstraints leftGBC;
      private GridBagConstraints rightGBC;
  
      private JButton Jbt1 = new JButton("Button1");
      private JButton Jbt2 = new JButton("Button2");
  
      private JLabel label = new JLabel("Enter your message below");
      private JTextArea jta = new JTextArea(10,15);
  
      private JButton Jbt3 = new JButton("Button3");
      private JButton Jbt4 = new JButton("Button4");
  }
  

• How to add textframe with anchor at each end of para

  I want to add textframe end each of paragraphs with anchor. Can anyone help on this?

  Hi N! evil,

  Please try the JS code below.

  app.activeDocument.stories.everyItem().paragraphs.everyItem().insertionPoints[-1].textFrames.add()
  

  THX,

  csm_phil