Text anchor point / alignment

Similar Questions

• Align to the left the text anchor point in After Effect

  Hello. Sorry if this question was very noovy, but I need left align multiple layers of text. So, I want to put my on board left the text anchor point. Because I need to be able to change the text and get the same effect, I would like to place the anchor point on the left edge by using an expression.
  

  I used something like
  

  x = 0;
  

  Y = this.sourceRectAt () .height/2;
  

  [X, Y]
  

  However, small, apparently random offset is throw me off. How can I align my text anchor point to the left edge?

  Thanks in advance!

  Yes... I created a font that has 0 left/right bearings, and it worked perfectly.

• How to add a text anchor point

  I just discovered the function of cross-references in InDesign, but I want my cross reference to point to the text anchor point but for the life of me I can't work out how to add a text anchor point.

  So how can you add an anchor to the text?

  Thank you.

  Highlight the text you want to be the anchor point. Open the hyperlinks Panel. In the Fisher panel choose the new Destination of the hyperlink, then the dialog box should appear with the anchor text and your highlighted text information. Click OK.

• How do Center you a text anchor Point?

  I want that all my text anchor points to Center in the middle of my words.

  By default, they remain in the lower left corner.

  Do I have to manually replace each of them with the transformation > setting the anchor every time?

  TEDIOUS.

  Is there no other way?

  You are not people of layout page or graphic artist so that perhaps you happened, but there is something that is called the vertical offset and I think this came there very long.

  Here's a small snapz pro easier film then show me to write.

  http://mysite.Verizon.NET/wzphoto/baseline.mov

• Anchor points align vertically in preview mode

  When I'm in preview mode, the scroll feature does not go to the where I placed my anchor points. How can I make more specific anchor points.

  Hello Stephen,

  Can you please refer to this link and read through the first 2 sections explaining the operation of anchor links and how they should be arranged so that their State active have been made: -.

  Adobe help Muse | Create hyperlinks

  Let me know if you're still having problems.

  Kind regards

  Rohit Nair

• InDesign text anchor links work only in the export to PDF.

  Hi all

  I have an InDesign document with a table of contents, I have rectangles drawn on each title, removed complete and race. I then linked these "empty" rectangles (using the hyperlinks Panel > create new hyperlink) to various anchor points of text that I placed it in the document. To create these text anchor points, I pointed out the titles throughout the document and using the 'new Destination of the hyperlink' via the menu of the hyperlinks, created all the anchor points of the text. I then just appropriate element Table of contents, create new hyperlink selected and "Anchor Text" in the options, choose the name of the anchor text and bobs your uncle. A dotted line appears around the rectangle "in white" and I then export as PDF.

  HOWEVER

  When I then open the PDF file, some of the hypertext links are clickable and take me to the destination I want in the PDF document. Some do not work. I don't know why. It's really frustrating.

  
  I tried to recreate the empty rectangles and the link between the rectangles to text anchors, but nothing will do. Anyone can shed some light on this? I'm doing it wrong? Is it using a blank rectangle to create the "button to click on the cause of this problem? There are about 40 of these empty rectangle buttons, as well as links to external PDF documents.

  Thanks in advance

  Thanks Frans

  I am amending a document made by someone else, and their mode of hyperlinking is ridiculous. Will have a look at the table of contents. For the moment, changing text link anchors to General pages allowed links to be clickable. The problem also seems to be to redirect the PDF as Adobe Reader works perfectly.

  It seems also to reference links to the indd rather than the PDF document or go to page 21 of *.indd rather than page 21 *.pdf

  See you soon!

• Set the grouping on the text layer anchor point?

  Hi all

  I am not able to change the anchor point of grouping in extendscript.  This doesn't seem to work:

  textAnchorPointGrouping = curLayers[i].property("text").property("More Options").property("Anchor Point Grouping");
  textAnchorPointGrouping.setValue("Character");
  

  Any thoughts on what I'm missing?  Can't seem to find how do script Guide

  Wow, ha, just figured it out after playing with him for a long time.

  1 = character

  Word = 2

  line = 3, so the syntax is:

  1. textAnchorPointGrouping = curLayers [i].property("text") ("More Options") .property .property ("anchor Point grouping" "");
  2. textAnchorPointGrouping.setValue (1);

• Anchor points for deletion of text path cannot not bad

  Hello.

  I have the following problem:

  For Client work (custom text), I took a text (Arial Black) and converted to a path.

  So far so good. I can grab the PSCs and move them. But when I delete one, the entire letter is going nuts. This isn't logically. It then connects random points.

  I can't work with this. Does anyone know why she is doing this?

  Greetings,

  Finn

  Finn,

  What happens if you use the tool remove an anchor Point (in the dialog of the pen tool)?

  Of course, you're dealing with traces closed and filled, if something is inevitable, particularly when it crosses itself, and if it's a compound path. If you Direct Select and delete, you open the paths.

• Need help to remove the small white lines between attached forms. Still visible even after aligning anchor points.

  Hey, I'm new here, so many apologies if the community has been asked this question several times before. I do a quick search, but couldn't find an answer to my problem anywhere. Would be very grateful for help.

  I'm quite a beginner with Illustrator, so this may be something embarrassing simple!

  But as the title says, I have a very frustrating problem, trying to create an image of polygon. I've been using the pen tool to make triangles, then join all my anchor points with the horiz/vertical align Center. Roads joined look good, until I have add color... Triangles have a very light white line on them, I have tried to delete the anti alias, which solves the problem, but then the triangles look pixelated. Even when you import into Photoshop the pale lines are visible, as well as when the file is merged or saved as a JPG file.

  I've seen some very impressive polygon art and forms look seamless when joined.

  Here is an example of the problem. Ideally, I'd like that forms merged without rough lines.

  See you soon! Any suggestion would be appreciated.

  .

  BRI,

  I just read it again.

  align the center of horiz/vertical

  works on objects, rather than Anchor Points.

  You can have triangles which fail to assemble completely.

  Try this, smart guides are your friends:

  Starting with the last triangle (you can see the stacking order in the layers palette), click the path to find) and work your way upward as follows:

  1) click on the lower triangle with the selection tool.

  2) click on one of the neighbors, and move it to the bottom to be second in the stacking order, then move it a little far, then ClickDrag back by one of the Anchor Points to be aligned corresponding to the lower anchor (Smart Guides say anchor when you are there).

  (3) with the ClickDrag Direct selection tool other anchor Point to snap (you can drag a bit far and back until the Smart Guides say anchor);

  Who should ensure a full adjustment between the two less triangles

  4) continue until you are finished with the other triangles.

• Why when I spend between a center-aligned line and fill my anchor points do they move?

  Hi, I use Illustrator for many years and never noticed this happens when I fill out a form - can someone explain why this is happening?

  I paint a logo using an accident stroke center aligned, rounded rectangle and another path merged to make my logo... like this plan...

  

  .. .and when I change my race aligned at the center of a STROKE to a fill and vice versa (to make the black solid form), the anchor points of my shape... move about 10 times for fswitching between the fill and stroke, background and outline etc. my ways look like this...

  

  Why is this happening? It doesn't do this when I use a line lined up outside or inside the way - just at the moment where the storoke is aligned with the center of the path? CAnanyone explain why this happens? What going on here?

  -Thanks in advance!

  -Pete Moore

  To this object in the transform Panel, uncheck "snap to grid of pixels.

• How to align objects to anchor points for towing towing?

  Hello.

  I need align two objects by two anchor points within the framework of selection of objects. How can I do?

  

  Ivan,

  Your options may depend on version; the following work overall.

  Especially if you want to be able to do it easily and for free, you can:

  (1) for each star, create a circle of nostroke/nofill (or rectangle) with a larger box enclosing;

  (2) the center of the circle on the anchor in question;

  (3) select the circle and star (you can combine them).

  After that, you can use Align and either move as you wish (towed by its towing anchor point). When (you're sure it's) done, you can (separate and) remove circles if you wish.

  It would be nice with a script or something that allows specific movements based on an anchor Point. Maybe someone already did.

• Center Align an anchor point

  Hello!
  
  I followed a tutorial (found at http://www.kirupa.com/developer/mx2004/xml_flash_photogallery.htm) and I'm having difficulties Center by aligning the anchor inside the vacuum film that loads images in the xml document. Currently the anchor point is located in the upper left corner of the image, the images will be not placed correncly if they are of different sizes. Is it possible to center align the anchor with Actionscript so images are displayed in the center of the image window? Can anyone help? I have attached the existing code in the first frame of the script that controls the film. The name of the instance to this MC is "image". Thanks in advance

  :

• Why my anchor points are moving when I'm United objects?

  I converted text in vectorised text and when I go to unite in action to become an object, Illustrator is editing location of anchor points and vectors. Why it does this and how I can change if it is no more?

  Check to align on the pixel grid

  Illustrator: Problems with snap to grid of pixels

• Anchor point does not exactly where I put it, but in the middle of the image

  I create the page muse 'contacts' and insert some text and then point anchor and under a photo. My index page, I link to my anchor point 1. the result is a photo half... I don't know what the problem

  The page is probably too short. The bottom of the page reached the bottom of the browser window, until the anchor is able to reach the top of the window.

• The object anchor points will not snap

  Hi all

  So, recently I noticed something in my illustrator, which I think is just the settings option.

  What's happening: when I use as race 8 on my items and I try to use the pen tool to add a few points, the anchor point objects, they simply do not snap.

  Like the image below:

  

  When I try to align these one, it moves a little further.

  Geometry of the invisible:

  

  Does anyone know how can I fix?

  PS: Sorry for my bad English tho.

  Andrée,

  In such cases, the first assumption is aligned to the pixel grid.

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Here is a screenshot of exquisite made per ton in the first post:

  https://forums.Adobe.com/message/7841770#7841770

  And you can watch it here:

  http://blogs.Adobe.com/adobeillustrator/2009/05/startup_profiles_a_great_tool.html