How to add the system desktop clock

Similar Questions

• How to add the quick launch of the desktop icon bar

  How to add the toolbar launch quick icon on the desktop. I can't find a desktop icon that will drag on

  The following Microsoft KB article

  http://support.Microsoft.com/kb/190355/en-us

  will help you.

  Good bye.

• How to enable the remote desktop on windows 7 because it is missing in system properties | using Remote tab

  How to enable the remote desktop on windows 7 because it is missing in system properties | tab use remotely.

  I am running Windows 7 Ultimate edition with service pack 1.

  I used to connect my mac via the desktop tool to remotely (2.1) on my mac to my pc windows 7.

  Now, it does not.  Check the services of windows 7 I have ensured that all the remote control * services are enabled, but I still do see the Remote Desktop option in system, under the remote settings properties.

  Any help would be appreciated.

  MasterJay1

  Click Start, click Help, and then type this phrase in the search box:

  enable remote desktop

  Article 5 will have explicit instructions for the task.

• How to add the Volume icon in the Notification bar

  How can I add the system Mixer / volume to the notification bar icon? Is present for other users and mine was there and somehow disappeared.

  Hello

  read this tutorial

  method 1 or 3 should solve this

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

• How to add the option in the SelectItem during execution

  Hello
  Can anyone help me please with this use case?
  
  I have a list set to the managed bean as below. I want to add new LOV in list (DROP DOWN 2) "ZZZ" based on the value selected in the DROP DOWN 1 on the same page. So that particular one value selected in the DROP DOWN 1, I want to have this new LOV displayed in the DROP DOWN 2. I'm doing it through ValuchangeListener, but I'm not able to find how to add the LOV. Help, please.
  
  
  
  USER INTERFACE

  <!-- DROP DOWN 1 -->
  <af:selectOneChoice label="Order Type" id="soc2" required="true"
                                          validator="#{lovManagedBean.orderTypeValidator}"
                                          binding="#{userAuthentication.orderType}"
                                          autoSubmit="true"
                                          valueChangeListener="#{lovManagedBean.orderTypeValueChangeListener}">                    
                        <f:selectItems id="si2" value="#{lovManagedBean.orderTypeItems}"/>
  </af:selectOneChoice>
  <!-- DROP DOWN 2 -->
  <af:selectOneChoice label="Request Type" id="soc1" required="true"
                                          validator="#{lovManagedBean.requestTypeValidator}"
                                          binding="#{userAuthentication.requestType}">
                                        
                                         
                        <f:selectItems id="si1" value="#{lovManagedBean.requestTypeItems}" />
  </af:selectOneChoice>

  Managed Bean code

    public List<SelectItem> getRequestTypeItems() {
      List<SelectItem> list = new ArrayList<SelectItem>();
  
      list.add(new SelectItem("XXX","XXX"));
      list.add(new SelectItem("YYY","YYY"));
     
     
      this.requestTypeItems = list;
       return list;
    }
  
    public void orderTypeValueChangeListener(ValueChangeEvent event ) {
        System.out.println("+++ Calling LOVManagedBean.orderTypeValueChangeListener()");
        System.out.println("Old Value for order type:" + event.getOldValue() );
        System.out.println("New Value for order type:" + event.getNewValue());
        if(event.getNewValue().equals("Time and Expense")){
          //Code to add LOV in drop down
        }
            
      
    }

  You could make it according to the following example:

  Sample.JSPX:

  
  
  xmlns:f = "http://java.sun.com/jsf/core".
  xmlns:h = "http://java.sun.com/jsf/html".
  xmlns:af = "http://xmlns.oracle.com/adf/faces/rich" >
  
  
  
  
  *
  autoSubmit = 'true' immediate = "true".
  * valueChangeListener = "#{pageFlowScope.SampleBean.onValueChangeListener}" > *.
  **
  **
  **
  *
  * partialTriggers = "soc1."
  * Binding = "#{pageFlowScope.SampleBean.selectOneChoice2}" > *.
  *
  * id = "si3" / > *.
  **
  
  
  
  

  * SampleBean.Java: *.

  import java.util.ArrayList;
  import java.util.List;

  Import javax.faces.event.ValueChangeEvent;
  Import javax.faces.model.SelectItem;

  Import oracle.adf.view.rich.component.rich.input.RichSelectOneChoice;

  public class SampleBean {}
  Private RichSelectOneChoice selectOneChoice2;

  public SampleBean() {}
  DataSource.Add (new SelectItem ("XXX", "XXX"));
  DataSource.Add (new SelectItem ("YYY", "YYY"));
  System.out.println ("to the constructor");
  }

  Private list datasource = new ArrayList ();
  private SelectItem newSelectItem = new SelectItem ("ZZZ", "ZZZ");

  * public Sub onValueChangeListener (ValueChangeEvent valueChangeEvent) {*}
  * if (valueChangeEvent.getNewValue () .equals ("Add") == true) {*}
  * System.out.println("::: Adding new select item choice"); *
  * datasource.add (newSelectItem); *
  *} else {*}
  * if (valueChangeEvent.getNewValue () .equals ("JustSelect") == true) {*}
  * System.out.println("::: Removing the added select item choice"); *
  * datasource.remove (newSelectItem); *
  * System.out.println (datasource.size ()); *
  *}*
  *}*
  * this.selectOneChoice2.setValue (datasource); *
  *}*

  public void setDatasource (the list data source ) {}
  This.DataSource = data source;
  }

  public getDatasource() {list
  Returns the data source;
  }

  public void setSelectOneChoice2 (RichSelectOneChoice selectOneChoice2) {}
  this.selectOneChoice2 = selectOneChoice2;
  }

  public RichSelectOneChoice getSelectOneChoice2() {}
  Return selectOneChoice2;
  }
  }

  * Ensure that the bean is saved in pageFlowScope.*

  Thank you
  Nini

• Satellite L650D - 10 H - how to recover the system?

  Nice day

  Today my OS on my laptop has been altered, he told me to restore my system. Windows recovery program does not work, every reboot of the same corrupted file. So I tried the vista edition Windows Home premium 64 bit dvd of my brother. Changed the options in BIOS and boot from there, but it took about 20 minutes to start the installer with the language menu.

  I noticed that the lamp 'written on the hard disk' shines all the time and from time to time the HARD drive is not listed in my BIOS. Maybe my HARD disk is damaged?

  Now my question is, how to restore the system or to stand up a new OS? What can I do to get my laptop still running? Where to send and what costs?

  best regards and thanks for any help
  oxxxe

  Edit: now the hard drive is still listed in the bios

  Post edited by: oxxxe

  Hi oxxxe,

  Generally you can restore the factory settings using the Toshiba recovery disc. Have you created this disk?

  In General, if the HARD disk does not appear in the BIOS from time to time, it seems to be a malfunction of the HARD drive and it should be changed.
  If your laptop is under warranty, an ASP may fix this problem for free. A list of all the authorized service provider, you can find on the Web from Toshiba site.

• How to add the name of the title of graph in Excel

  Dear friends

  I'm using LabVIEW 8.0.I need how to add the name of the title of graph in Excel.

  You have the report generation tool? If so, the VI of graph Easy Excel has an entry for this.

  If you don't have the Toolbox, then you need to use ActiveX. Please do a search on the use of the ActiveX (there are examples provided with LabVIEW) to control Excel. Also, there are many examples in the thread Excel. NOTE: DON'T POST QUESTIONS IN THIS THREAD.

  In the end, you will need to search for information contained in MSDN.

• How to reset the System Volume Information folder?

  I would like to know how to reset the System Volume Information folder to empty all the potential viruses.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions :>

  

  I use cleanmgr /sagerun:1 of the dialog box run when you use a switch.

  However, I usually just use these instructions.

• How to add the full value of two buttons?

  How to add the full value of two buttons (any key) VI and display it in the output text box? I am attaching a sample program, but I know that his evil... Help, please

  Try this

• How to open the system maintenance Troubleshooter in windows vista

  How to open the system maintenance Troubleshooter in windows vista?

  Hello

  Please be informed that Troubleshooting maintenance system was introduced from Windows 7.

  However, you can run the fixit mentioned below for Vista.

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  You can take a look at solving the problems of system maintenance in windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-system-maintenance-Troubleshooter

  For more information, please visit the links below.

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

  Optimize Windows Vista for better performance.

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Warning of Chkdsk.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For the anti-virus scanning:

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• How to clean the system

  original title: update

  I HAVE PROBLEMS ON MY COMPUTER... SOMEONE SUGGESTED THAT I TAKE GET ADJUSTED UPWARD.  IS THERE SUCH A THING AS A PC TUNE - UP TO?  IF SO, CAN I DO IT MYSELF OR SHOULD I TAKE IT TO A SPECIALIST?  SOMEONE CAN ME SAY STEPS SHOULD I TAKE?  I WAS TOLD THAT MY OPERATING SYSTEM DOES NOT RIGHT AND THAT IT IS ORIGINALLY MY MCAFEE NOT WORKING PROPERLY.  I'M LOOKING TO REMOVE ANY VIRUSES, TROJANS, MALWARE, ETC FROM MY COMPUTER AND GET MY COMPUTER RUNNING SMOOTHLY.  Thank you.

  Hello

  PC TUNER is 3rd party software and it is not recommended by Microsoft.

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I suggest you to follow the methods and check.

  Method 1:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  How to troubleshoot performance issues in Windows Vista

  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista

  http://support.Microsoft.com/kb/959062

  Difficulty of Windows system performance slow computer problems

  http://support.Microsoft.com/mats/slow_windows_performance/en-us

• How to add the translation application to my email add FB?

  Original title: translation

  I need to know how to ADD the TRANSLATION software to my email add FB? Any help?

  Try here: https://www.facebook.com/help/100117036792266

  Translate the updated Facebook application on the road

• My question is how to open the system advanced settings in window 7 64-bit home preuim

  My question is how to open the system advanced settings in window 7 64-bit home preuim

  Hello

  Assuming you mean the Windows Advanced System Settings screen, then right click on my computer and choose Properties.  On the left side of the screen, you will see a link for the advanced system settings.

  You can also call directly my pressing the windows and R key (which will bring up the Run dialog box) and typing in control sysdm.cpl

  I would like to know how you, or if you want to say something else.

  Good luck & enjoy Windows 7
  Jon

  If this message was useful and allowed, please consider the vote and it offers as a response...

  My Blog - www.insidetheregistry.com

• How to add the Quazip library

  Hi, I want to try to use Quazip. Since I read, I have to add the library before use.

  I downloaded from http://quazip.sourceforge.net/

  How to add the Quazip library? Please explain the step, never add lib before.

  Thank you

  I have change the .pro file

  Like this:

  http://StackOverflow.com/questions/13341234/unzip-files-downloaded-from-Server

• How to end the system idle process

  How to end the system idle process
  ... "it is to consume my whole CPU.

  system:
  HP pavilion g4 series
  Intel core i5

  No it's not! Maybe someone else can give a better explanation, but the way I understand it is that when your system is idle, the system shows 100% idle process or nearby and it is because it has no applications or programs that run, but as soon as you open a program or run an application, and it requires CPU resources say between 1 and 4%, you will see the system idle drop in numbers, which shows the amount of the resources required by the program or open application.

  So I believe that everything that is, show processor resources available to a given point in time.

  Now, a virus can attack the process and change his behavior? I don't know, but if you suspect a malware attack, run complete scans of your system just to be sure.

  Good luck.