How to adjust the data in dynamic data?

Similar Questions

• How to adjust the date of transition of the slides in a slide show created in Windows Media Center

  I tried to set the time of transition from slides in a slide show using Windows Media Center. I went to the period of Transition, tasks, settings, photos and the value 3 (seconds, I presume). Saved settings. Burned DVD. Slides are still in transition to about one every seven seconds, same as before. Put forward that I changed it to 12, by the way. Even then, the time of transition seems to be about one every seven seconds. I'm doing something wrong? I want the transition period between the slides only 3 seconds. Where it's important, my slide show also has music. I use Windows Vista.

  Hello

  Try to check and clean the boot:

  Here is the link:

  http://support.Microsoft.com/kb/929135

  For more information, see this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-video-and-watch-pictures-in-Windows-Media-Center

  It will be useful.

• Anyone know how to check the date of warranty until when?

  Anyone know how to check the date of warranty until when?

  https://checkcoverage.Apple.com/Jo/en/;JSESSIONID=9pJ0X9pFPJtNg3c44yDGCvk9pVpt5l QSgn4B60y4Skv1WfmnqMkF!-1840326800

• How to find the date item was my favorites on Mozilla Firefox

  on system moot bookmark how to find the date of the bookmark?

  In bookmarks menu select organize bookmarks to open the bookmarks library. In the bookmarks library, click views, and then display the columns and then added. This will display a column showing when a bookmark has been added.

• How to set the date and time on my HP Officejet pro 8600 more?

  How to set the date and time on my HP officejet pro 8600 more?  It just on a printed journal Jan-oo-oo fax shows 00:00 AM.  There are no instructions on how to change this.  I need proof that I sent a fax to a certain date and time.  Help, please.  Thank you

  Hello

  Below are the steps to set the Date and time for your device:

  1. On the Control Panel, press the right arrow key ( ), press Setup ( ).

• Camileo S20 - How to display the date and time

  Hi, all. I got as Christmas present the Camileo S20, and I am not able to view the date and time in the video. In the manual is no reference on this subject, only how to set the date and time. But what is the intention to set the date and time in the camera, if it is not possible to display video?

  Hello

  Have you checked the user manual of your TV cam?

  If it of possible to display the data and the time you can find in your user manual how to do this. It always interesting to read ;) s

• How to reset the data counter without resetting the phone

  How to reset the data counter each month so that I can control my data counter with our reset the phone (or) without using factory data reset.

  Thanks for the reply much appreciated.

  Parameters

  Data Manager

  Press the lower left key

  Reset the data counter

• How to save the data in table 1 d to Excel in continuous

  Mr President.

  How to save the data in table 1 d to Excel at all times, so that all the data of the first scan must be placed first thought and all the data from the second analysis must be placed on the second Board and continue on the street...

  Sy@m...

  Hi Sy@m

  Here is a vi that might give you a few ideas to try:

• How to read the date and time of a file by labview information

  How to read the date and time of a file by labview information? for example, time created and updated time.

  The similar question had already spoken here (this is the old thread but still seems topical):

  http://forums.NI.com/T5/LabVIEW/file-date-created/TD-p/109836

• How to analyze the data of the cDAQ and Signal Express, especially after analysis?

  In the first series of tests of my instrument, it took longer than expected for the race.  Thus, the data was saved in 6 days.  The file is too large for export to Excel.  At the beginning of the project, I was as ignorant as I could go ahead and add analysis and the scaling of measures.  By the scaling, I mean my data of switching current dew points or whatever it is that I record.

  How to evolve the data to read the output data as expected 4mA = point of dew of-20 C or 0 PSIG?  Can I pre program this to be recognized for each event?

  For real analysis I am doing – I would first analyze the data I recorded and choose different points to send to Excel to graph and analyze.  Is this possible?

  Secondly, I would like to know how to scale and analyze my data in the project without having to do this later analysis in the future?

  I have a cDAQ-9172 with LabVIEW signal Express 3.0 that uses four modules - 9211 2 modules of thermocouple, my 4-20 1-9201 module +/-10V module and 1-9203.

  Thank you for any assistance.

  Hi Patricia,

  "' You can do this by adding a step Load/Save signals ' analog '.  I hope this helps!

• How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?

  Hello

  I'm trying to follow the steps described in the following link:

  How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?

  It is said

  The software on the target currently supports only the time zoneand deletes the old files?

  I need set the date and time

  and remove all the old unwanted files

  the calendar was gray does not allow me to change the current date.

  Anyone know how to change

  

  

  Hi all!

  According to this the below Knowledge Base article, Remote Configuration System Support must be installed on the target for time settings to change in MAX.

  http://digital.NI.com/public.nsf/allkb/FAB0EC4D6E5EE0F386257738005733A3?OpenDocument&MeTC=max_MAXDat...

  If you don't know what version of the system supported remote Configuration software that you have installed on your device target, it is likely that it is not yet installed. Add this software by clicking below your target to the MAX software option and selecting "Add/Remove Software". This is where you will install the System Configuration Remote Support software.

  Please let us know if you have any questions!

• all my data is all save on the local disk c, how to share the data with the other drive, local drive d.

  all my data records on the local disk c, how to share the data with the other drive, local drive d.

  Hi Jasonbichard,

  1. what type of drive is D? Is - this another partition on the same disk?

  2 Windows operating system you are using?

  You can change the location of the disk to save the data in the d: instead of C: and check if it helps.

  a. navigate to the location (username) C:\Users\.
  b. right click on the folder that you want to change the location, and then select Properties.
  c. click on the location tab and change the location to D: drive.

  d. click on apply and Ok.

• Adjust the Date and time on the HP LaserJet MFP M127fn Pro?

  Hello

  Someone knows how to change the time on a LaserJet MFP M127fn Pro?

  Thanks in advance!

  Sean

  .

  Hi @SeanKaneFLA ,

  I see by your post that you would like to know how to change the date and time on the printer. I would like to help you today.

  This information was given by the manual on page 45. MFP LASERJET PRO.

  You may have configured these settings when you installed the software. You can configure these settings
  at any time by using the control of product or the HP Fax Setup Wizard panel.

  LCD control panel:
  1. on the product control panel, press the Setup button.
  2. Select the System Configuration and then select Date/time.
  3. Select the clock in 12-hour or 24-hour format.
  4. use the keypad to enter the current time and press the OK button.
  5 Select the date format.
  6 use the keypad to enter the current date and then press the OK button.
  7. Select Fax Setup, and then click Fax header.
  8 use the keypad to enter your fax number and press the OK button.
  NOTE: The maximum number of characters for the fax number is 20.
  9. use the keyboard to enter your company name or header and press the OK button.
  NOTE: The maximum number of characters for the fax header is 40.

  (Windows) HP Fax Setup Wizard

  1. click on start and then click programs.
  2. click HP, click the name of the product, and then click Fax Configuration Wizard.
  3. follow the on-screen instructions to configure fax settings.

  I hope this helps.

  Good day!
  Thank you.

• Multiple column trees: how to access the data in columns? There is a bug?

  Hello

  I have a strange problem. I use tree column multi like this:

  

  In this case, I have the tree column and two other custom columns.

  Now, how to access the data in the SECOND column?

  We can write all the data in a row thanks the EditElementTree:AddElement:ChildText, because it is an array of strings.

  However, when I want to read the data, I use ActiveCelltring, meaning that a SINGLE string and not a string table oO (so I only have the value of the first column and never others.

  So, I can do what I want? Is this a bug?

  Thank you very much

  R0b1n

  OK, I have the solution.

  We play with the ActiveColumnNumber attribute, to read the values of different...

  I left the message, it may be useful for later someboby

  R0b1n

• How to set the date and time on an hp j5780?

  I need to know how to set the date and time on an HP j5780!

  Help!

  Thank you very much, we did it!

  WY