How to allow the computer after reconstruction because of hard disk crash.

Similar Questions

• How to disable the file hiding (changing options for hard disk does not work)

  Hi all

  I hope someone can help me with the following problem:

  -J' need to open a file of 16 GB of content in third party software (Stata) who reads completely in memory.

  -Due to Windows caching file, necessary to get the procedure done about 32 GB cache files and Stata access physical memory.

  -As I have only 24 GB of physical RAM file is read later part of virtual memory, which leads to serious performance problems.

  I unchecked the box 'Enable write on the device cache' to my hard drive. That did not help. Is there a way to disable the Cache during PLAYBACK of files?

  Thank you very much in advance for any help!

  Tobi

  The write cache and virtual memory are different. Virtual memory is an extension of the physical memory residing on the HARD disk where Windows is installed. Normally, the virtual memory is about twice the size of the current physical memory. Write cache is an exclusive setting for external hard drives only and has no effect in internal hard drives.

  In your case, please note that full 24GO of RAM will not be allocated to the program. At least 1 GB will be reserved for windows, so the rest of the programs are moved to virtual memory, which means that the HARD drive. It is not recommended to disable virtual memory because it can cause stability problems. In addition, the files are not copied directly in memory, even if they are big. Instead, the parts of the file are available and this area, including the incremental values and material, are stored in the memory. So if all of a sudden, you access an area of the file which is very far away from the previous location, it takes time as the new area, as well as differentials and material value of a few bytes is also copied to the memory. The box of files previously displayed is erased from the memory.

  For performance improvements, you can go for the SSD, RAM with higher clock speed (must be compatible with the motherboard) as processor as well as the upgrade. However, please note that the process of accessing a file even as mentioned previously, but the speed will increase because of the higher bandwidth and the clock frequency.

• HP pavilion g6: how to restore the system using a newly installed hard disk recovery disk

  Hey, everything started when I downloaded the new Windows updates after a long period, after downloading the updates, the blue screen appeared, I restarted my laptop and since then, I get a black screen with error oxcoooooe9. I tried to run a test drive and it came with the 0303 error which means that my hard drive needs to be replaced, so I am a new hard drive and the fixed but now when I am trying to restore the system using the recovery disks that came with the laptop, it says incomplete restoration. Kindly help how do I get my system in working order. Also, I tried all 3 options on the recovery disk, still getting the same message. Help, please.

  Hello @Anky11,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I came across your post about the system recovery and he wanted to help!

  For starters, can you provide me with the product number and the operating system of your laptop?  You can use these links to help you find the product and the operating system:
  How can I find my model number or product number?
  Operating system Windows am I running?

  In the meantime, please consult the following documents, as they can help solve the problem for you:

  HP PC - troubleshooting (Windows 8) HP system recovery problems

  HP computers - resolution of the problems of recovery HP System (Windows 7)

  Please let me know if this information has been helpful by clicking the thumbs up below.
  
  Kind regards!

• How to reset the screen to start a SMART HARD DISK ERROR

  Hello

  I have a presario CQ56 ((XH167EA) which gives an error screen almost immediately at startup "smart hard drive control has detected an imminent failure".

  I checked the drive Samsung HM321HI with Seagate Seatools for DOS and it confirmed 4 errors (either incidentally, Seatools does not fix the errors of Samsung, although they admit, it should, like Seagate look after "Samsung" readers - they say they "work on it"..)

  I know I have to replace the hard drive thereafter, but have backed up all my files, etc. and the problem does not appear to be a lot worse (for now...).  I am a clear user and am glad to use it until it dies, then buy a replacement.

  Is it possible to stop this form to appear at startup.  My bios is updated.

  And, Yes, it is legitimate!

  In addition, the player is now just out of warranty, but if I can identify when the BULLET is fired, HP will honor the warranty if it is triggered in the warranty period?  I think I can guess the anwer, but worth asking maybe, if anyone knows the rules of HP on this...

  Thank you.

  HA, I know my limits!  We'll leave it at that then - thank you very much for your help with her.

• lost my lightroom because of hard disk crash?

  How can I download a new program, and to how many computers can Idownload it?

  You can download Lightroom link below: [If you had purchased and the serial number]

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-downloads.html

  You can enable Lightroom on 2 computers.

• How to reset the computer to start the boot minimum troubleshooting.

  I posted this screenshot because I have no idea what can be the maximum size of a question and I thought I have copy paste this but I to Sir's life saw the question so I did this. Additional information that could help. This is my task manager open resource monitor and windows firewall not wanting to tk starts. And I have windows updates where I chose to update (I try to deny each update.) And so far I've checked that I have 482,5 MB of updates of windows that say I should put to date. (apperently 130 important and 10 optional) in addition apperently my computer don't think that I am administrator I do not understand when I'm the only profile on the computer.

  Hello

  In response to the information provided by you, please try to follow the methods and check them off below if this can help,

  Step 1: Scan of Sfc.

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Follow the steps below to perform a scan of the SFC.

  1. press the Windows key + X key.

  2. Select prompt (admin).

  3 type the following command:

  Sfc/scannow

  Step 2: Clean boot.

  Make your systemclean boot State helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  https://support.Microsoft.com/en-us/KB/929135

   

  WARNING: After troubleshooting, refer to the section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Please let us know if the problem is resolved or you need additional assistance.

  Thank you.

• Unable to start the computer after the installation of Windows updates

  original title: same problem with the other oddities.

  I also have a computer down the update.  Although I tried several times to start the computer from the installation CD re, when I get to the page where I have options to fix or exit, locks from my computer to the top and will go no further.  Suggestions how to get the computer to boot the CD and allow me to choose the repair option without locking up?  Thank you!

  I finally managed to get the reinstallation CD to load.  I also spoke with telephone tech support at Microsoft who helped me to descend KB977165 my system.  After that was removed the computer booted without error.  By MS tech, I am also running the anti-virals and malicious programs to see if they detect all the other infections.

  Originally, the CD would load to the point of being able to choose between the options: continue to fix or exit.  At this point, the computer froze upwards and would not all repairs in order to remove KB977165.  Microsoft launches a call again tomorrow in order to install safety free bug so far.

  Thanks for your reply.

• The event GWX.exe messages must remain on the computer after you made the reservation for a copy and agree to receive their copy?

  The event GWX.exe messages must remain on the computer after you made the reservation for a copy and agree to receive their copy?  It certainly is learning to be OVERLOAD on these messages and would like to know if it is OK to remove them and what to do to STOP these messages.  I asked the program and I've been accepted/approved/reassured that will ship a copy - JUST WANT TO KNOW IF I CAN REMOVE THIS sort of THINGS NOW, OR should she REMAIN ON MY COMPUTER?  It's the only question I have that needs to be answered. Thank you

  ybliku2

  Since early may, Microsoft began providing updates prerequisite for these systems for the upgrade. Known as the get Windows 10 app (GXW) this KB update installs the mechanisms to verify your system readiness and download Windows 10 through Windows Update. Users will see a notification added to the taskbar allowing users of the availability of the operating systems and of the possibility to book the update and download automatically on July 29^th 2015.

  You can also download Windows 10 as one. ISO file and do the upgrade manually:

  How to: upgrade previous versions of Windows using the file ISO for Windows 10

• I get a message that says that I must allow the computer when you try to download music purchased at the newly bought laptop.

  Original title: iTunes Question

  I recently bought a new Windows 7 laptop and downloaded iTunes. I have hundreds of songs already purchased and need to download on this computer... when I access my account and then click on download, I get a message that says that I must allow the computer. Any suggestions on what to do?

  Thank you!

  You can check with Apple because they created iTunes.  Check the Apple Web site, I found the following FAQ on what you need to do to allow a new device:

  1. Open iTunes
  2. From the Store menu, choose authorize this computer.
  3. When prompted, enter your Apple ID and password, and then click allow.

  Note: if you already allowed iTunes to another PC and that you no longer use this computer, you should have allowed him out before getting rid of it.  If you don't do this, you might consider off allowing all devices first, then allowing the new PC.

• BSOD and how to refresh the computer

  I have a gateway to window computer 8 I've had for a year now and never restarts time I try to put on my computer it won't let me because it goes to the home page and comes up with a message with different types of BSOD errors and then force, then whenever the computer load it keeps then me on reviews and it never let's me back to my original account and I need a way of doing things to normal or if someone can tell me how to reset the computer that would also be very useful.

  Original title: my computer problems

  Hey Nasir,

  I understand that your computer gives error BSOD and your user account is signing you as a guest user and you also want to know about reset.

  Sorry to hear about the embarrassment caused and thank you for the detailed description.

  To help you better please answer the following questions:

  1. What is the brand of computer?
  2. You have a third-party security program installed on the computer?
  3. You recently made any changes to the computer?

  This issue could be due to the following issues:

  • Drivers are corrupt.
  • Damaged user account.
  • Problems of virus and malware.

  Learn more about BSOD please refer to the article:

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/blue-screen-of-death-BSOD/1939df35-283f-4830-A4DD-e95ee5d8669d

  Follow the suggestions below and check if this can help:

  Method 1: Safe Mode

  Follow the bottom of the article which will help you to start the computer in safe mode and check if it works fine in safe mode:

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  Search your computer in safe mode, all the third-party program installed on the computer are disabled in this mode.

  Method 2: steps can be followed to BSOD

  This article will help you solve the BSOD errors on the computer:

  http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  How to reset the computer

  Please follow the article below and this will give you the procedure step by step to start the reset of the computer:

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Refer to: refresh your PC without affecting your files.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• How and when the computer turns off automatically?

  Listen to internet radio, Sys Pref > saving energy on the default setting, wake up and radio program cut.

  This is great... .buth how and when the computer turns off?  When I reopen it wifi comes back, I'm correct when she stops she also turns off wifi?

  Hello allan299,

  Thank you for using communities of Apple Support.

  According to your post, I see that you have any questions on how and when your computer shuts down, and how the WiFi on your Mac is affected. I know it's nice to be able to properly manage what happens when your computer stops and starts in mode 'sleep'. I'm happy to help you find the best resolution.

  You're right, when your computer stops completely it will turn the Wi - Fi. If you enable the wake for network access, Wi - Fi remains lit, and you can access shared resources on your computer, such as printers or iTunes shared playlists even when your computer is in "sleep". Definition of a calendar closing and start on your Mac can also be useful.

  Check out the following resources that will help the set options that control the energy use of your computer, sleep, and wake-up times for your Mac and the calendar from your Mac to turn on or turn off or go to sleep:

  OS X Yosemite: energy saver Preferences

  OS X Yosemite: set sleep and wake up on time for your Mac

  OS X Yosemite: A schedule for your Mac to turn on or turn off or go to sleep

  Best regards.

• I want to know how to restore the computer to its factory settings, when I bought from a private party and have an administrators access code

  I want to know how to restore the computer to its factory settings, when I bought from a private party and have an administrators access code

  Hello

  What is the brand and model of the computer?

  The best method is to contact the computer manufacturer for help on how to set the computer to its factory settings.

  Hope this information helps.

• How to get the computer out of safe mode of power

  How to get the computer out of safe mode of power

  Hello jeffg56,

  I understand that you want to leave safe mode, follow the steps below:

  Exit Safe Mode:

  1. Click Start, type msconfig in the search field and press ENTER to open the System Configuration window.

  2. On the general tab of the System Configuration window, select Normal startup, and then click OK.

  I hope this has been helpful, please let me know if you need more help.

  Thank you

• Is it possible to shut down the computer after the call to a draw on Chess Titans?

  Is it possible to shut down the computer after the call to a draw on Chess Titans? It does this to me almost everytime I have the King stuck, but when my King is stuck, I lose each time. WTH?

  original title: circulation of Chess Titans

  If its your turn and you can make any legal move either with any piece, but your King is not in check, it is then deadlock. Deadlock is considered a match draw in standard chess rules. For examples, see:

  http://en.wikipedia.org/wiki/Stalemate .

  If your King is in check and you can immediately do a legal process to get out then check it's checkmate. For the person who the King is in check, this counts as a loss. For examples, see:

  http://en.wikipedia.org/wiki/Checkmate .

  In the two scenarios above, can even vice versa (it may apply to your opponent too).

  If the above explains what you see in Chess Titans then the program is correctly following standard rules and it is not a bug in the program. If she does not explain what you see then please explain more precisely the scenario.

• Does restart/reboot the computer after installing or uninstalling a program?

  Original title: does restart/reboot the computer after installing or uninstalling a program? Which option is it on Vista? Hit reboot? Or off, wait and then start up?

  I was told that if you add or remove a prgram, after it installs you need to 'reboot '.

  Is this true?

  Does this mean that, after the program is installed, you must reach the restart button? Or press 'stop' and then again wait a minute and then be able to save the PC?

  Hello

  Often an installation or uninstallation of will need to reboot to complete and it never hurts except for the
  time it takes.

  A reboot is usually sufficient.

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.