How to assign other print in different Versions of Windows drivers.

Similar Questions

• How Brussels a printer on a home network using two different versions of windows/XP and 7?

  I am using an HP printer installed on my home network and my Windows XP with my new Windows7/64 bit. Windows XP is 32-bit.

  Someone at - it the key?     Jack

  Hello

  If your network contains computers running different versions of Windows, put all computers in the same workgroup.

  I suggest you to refer the steps mentioned from the link, this could help you share the printer on the network.

  http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-XP&V1H=win8tab1&V2H=win7tab5&V3H=winvistatab1&v4h=winxptab4

  Additional information:

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp)

  I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp). My pc with win 7 work ok, but the pc with win xp not 'see' the printer on the network. What is the additional driver should I install?

  Thank you

  Hi @OHIMATAS,

  I see by your post that you are unable to network that is connected the printer to the Windows XP computer, but Windows 7 computer. I can help you with this.

  Make sure that the Windows XP computer is connected to the correct network name, not a guest or the other network.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration Page.

  Try and access the printer on the Windows XP Embedded Web server.

  Type the IP address in the address bar of your web browser. (Internet Explorer)

  It loads the page Web has?

  If you are unable to access SAP of the printer, check the IP address on the computer to see if the first 3 sets of numbers match the printer IP. They must match to be on the same network.

  Go to start, type executer run in the start search box, type cmd, and then type ipconfig.
  Check the IPV4 address.
  Now, check the IPV4 address for the printer.
  Do the first 3 sets of numbers match?

  Try and ping the printer.

  In the same window, type ping printers (space between ping and IP address) IP address
  What are the results?

  Run the Wizard add printer in printers and faxes, if you were able to access EWS of the printer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• Networking of computers running different versions of Windows

  I'm trying to set up a home network between my laptop (vista) and the computer (xp) that has the printer and internet connection. How can I set up? My laptop keeps telling me that I have to enter the network password, which I never put in place? Thank you!

  Hello

  Here's an article that talks about the same thing. If please go through it and follow the instructions on it. This will help you set up a home network between your computers.

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows-Vista/Networking-home-computers-running-different-versions-of-Windows

  Try that and check if it solves the problem. Hope this information helps you.

• MY DELL LATITUDE D610 HOW CAN I UPGRADE TO THE NEW VERSION OF WINDOWS? NOW IT IS WINDOWS 7, WHAT VERSION IS SUPPORT FOR USE WELL ON MY DEVICE?

  MY DELL LATITUDE D610 HOW CAN I UPGRADE TO THE NEW VERSION OF WINDOWS? NOW IT IS WINDOWS 7, WHAT VERSION IS SUPPORT FOR USE WELL ON MY DEVICE? PLEASE HELP ME

  Read this: upgrade Windows 10 Dell Latitude D610

  Take a look at my answer, complete instructions.

  Basically speaking, Dell officially supports Windows 2000 and Windows XP on Dell Latitude D610 (and other models of Dx10).

  However it can really run Windows Vista and 7 at least, as long as you max out the RAM (2 GB, 2 x 1 GB, can be purchased at a great price in eBay) and install the drivers, in particular graphics drivers, look in Device Manager and see what drivers are needed manually.

  If you're lucky to have a D610 with ATi graphics card then you can even run Windows 8 and 10 with all drivers available, and I can tell you that it won't be slow dog not unlike a lot of people say, I don't have something similar (a HP Compaq nx8220) in common use. Keep as lean as possible (not bloatwares, anti-virus etc.) system, and it will serve you well.

• How to use paper in the latest version of Windows Live Mail?

  How to use paper in the latest version of Windows Live Mail?

  Version 2011

  Short answer: the stationery support has been removed from Windows Live Mail with the upgrade of v.2009 v.2011 back in 2010.

  Long answer: there are two solutions of workaround that you can try.

  • If you have a stationery .htm file, open it in Internet Explorer, and then select file > Send > Page by email (Alt - F E P). Save the message as a result as a .eml file and use it as a model for messages.
  • You can get in shape, for example a background color, to a HTML signature, then apply this signature to an e-mail message. Here's the one I use when sending pictures:
    

    
    

    Hello!
    
    Love
    Noel
    
    

    
    

    Here is the result:

    

• How to install my printer Lexmark 2500 to my Windows 7 Acer Aspire Netbook?

  How to install my printer Lexmark 2500 to my Windows 7 Acer Aspire Netbook?

  The printer came with an installation disk or driver?

  If this is not the case, try using the Vista drivers from this page:

  http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X2500&focusedTab=downloads#1

• How to assign the password for different SSID in embedded AP - w1941 Cisco

  Hello

  Can someone tell me the configuration of the CLI of assinging for SSID password created in cisco integrated access point 1941.

  If so, then can we use WEP encryption on cisco 1941 AP?

  Yet one thing, I get the message click the SSID that "information sent over this network might be visible to others" what does this mean and how to solve this problem. Thank you

  Gotcha!

  The command is...

  encryption [vlan vlan-id] key 1-4 size { 40 | 128 } encryption-key [transmit-key]
  
  We need to map the Vlan for each SSID..
  So the comand will be..
  encryption (vlan vlan#) key 1 size 40bit 7 F3546E765203 transmit-key
  We need to make sure that... under the SSID, we have mapped the coresponding vlan..
  that is.. if you have a SSID by name XYZ and you want the clients to get the IP from vlan 10.. then the config will be..
  en
  
      config t
  
      dot11 ssid XYZ
  
      vlan 10
  
      auth open
  
      mbssid guest-mode
  
      end
  config t
  
      int dot11 0
  
      encryption vlan 10 mode wep mandatory
  
      encryption 10 key 1 size 40bit 7 F3546E765203 transmit-key
  
      no shut
  
      end
  and followed by the subinterface commands.. and the same should be done for all the other SSIDs with different VLAN mappings and keys.
  let me know how this works out for you!!
  Regards
  
      Surendra
  
      

• How many connections to a shared folder is allowed in the different versions of Windows?

  I have Windows 2000 with a shared folder to which only up to 10 computers can connect. Is there a way to increase this limit, and if not, is this upper limit in later versions of Windows? Thank you.

  This is the limit on all but the server versions.

• How to have 2 different versions of Windows on a pc?

  I want to be able to use both an English AND a Polish language version of Windows (XP, probably) on a pc - although not to use both at the same time! Is it possible to divide the disc in some way to do this?

  You talk about the partitions, you can have 1 hard disk divided into paragraph which will appear as several hard drives.

  When you install XP it will ask questions about the creation of a split partition the diffence then install xp on both partitions.

  If you have a hard drive with nothing on it, you can use SwissKnife (its free) to test what I say.

• How to make the printer deskjet 3940 compatible with Windows 7 Home Basic, 32-bit?

  I have the HP Deskjet 3940 printer. I recently bought a Lenovo (C320, 57-302429) desktop computer that has Windows 7 home basic, 32-bit operating system. The said printer does not work with the computer above. Please guide how to make this printer compatible with the operating system above.

  1. click on the Start button, select Control Panel and double-click devices and printers.

  2. click on Add a printer.

  3. Select Add a local printer.

  4. Select an existing Local USBx port, click Next.

  5. click on the Windows Update button.

  6. once the update is complete, locate the 3940 driver.

  7. click on Next,Next,Next,Next,Finish

• How to get back to my old version of windows 10 hp 2000 laptop with office pro upgrade

  I was using my HP 2000 portable win 7 upgraded to Microsoft office professional 10 nothing works can find anything that either don't know how to get around on computer. Corina always send me to the internet when you ask a question just lost. emails, favorite don't get anywhere. How to down the slope to my original version?

  How to return to a previous version of windows to Windows 10

  https://techingiteasy.WordPress.com/2015/03/24/how-to-rollback-to-a-previous-version-of-Windows-from-Windows-10/

• See Persona management and different versions of Windows

  Hello

  I would like to have management Persona to respect version of profile settings in Windows.

  I enabled through the registry of Windows, versions of profile but Persona management always uses the suffix V2. Is there a way of automatically manages this or should I create two different GPO for windows 7 and windows 8.1 where I specify two different paths?

  Cristiano

  Hi Cristiano,.

  Regarding your questions.

  Automatically adds the Persona. V2 as a suffix of the profile. It's for Windows 7 up to version 8.1.

  If you want to differentiate the profile for Win7 and Win8.1, then you must create the location of different profile using different GPOS.

  However, if users want their data are always the same, I suggest that you use the folder redirection for data users such as "My documents", "my music", etc.. "

  Evelyne

• Different versions of instrument drivers

  Hello

  Version of labVIEW drivers are specific?

  If I have an instrument not - NOR and the only driver available for the version of labVIEW 8.2 for interpreter, this driver may work with newer versions of labVIEW 8.6, 2009and 2010.

  Yes, it will work. He just needs to be recompiled and re-recorded for the new version. Just open the screw in the new version and save it back. Make sure that you have a backup of the original.

• How will I know if I need to update windows drivers? I continue to receive messages to update the drivers. Don't know if it's microsoft or something.

  I get messages that I need to update the drivers.  Don't know if it's the Microsoft or someone else.  How will I know if I need to update the drivers?

  Thank you

  MS victory do not harass allows you to install the drivers, any notification comes from a third-party utility.

  Have you installed third-party type maintenance programs?

  I would suggest to scan the PC for malware with this utility free http://www.malwarebytes.org/antimalware/

  If you need to update all system drivers depends on if you encounter any problems, in general, if you're not, it is useless

  Pilots are obtained from your PC manufacturers support site, if a brand PC