Similar Questions

• [CS5 JS] excluding the Notes of search and replace

  Hello

  Does anyone know how to exclude all text within a Note of a search/replace, text or grep operation?

  I went through and systematically all the findChangeGrepOptions that had the word "include" in false:

  includeLockedStoriesForFind: false

  includeLockedLayersForFind: false

  includeHiddenLayers: false

  includeMasterPages: false

  includeFootnotes: false

  just to check, but nothing has worked. myText.changeGrep () has again changed the text in the note.

  Of course, it would be pretty easy to write a wrapper function

  var myChangeGrep = function( textObject, checkNotes ) {
     checkNotes = checkNotes || false;
     results = [];
  
    // Go through and run changeGrep on all the 
    // parts of the textObject that are not contained inside Notes, 
    // (or just run it on the entire textObject if checkNotes is true),
    // and push the results to the results array as we go along.
  
    return results;
  };
  

  but it has the disadvantage that it returns a table and not a collection of InDesign, as does the regular changeGrep. In addition, as simple as it may be, it would be easier if there was a preference somewhere to take care of this.

  Any idea?

  Thank you!

  There is no preference for that: the scope of search and replace can be set only with five preferences that you have already tried. (In the same way, you can not include/exclude tables.) findGrep() and changeGrep() return an array, for that matter, not a collection.

• Try to find the queries of search and replace

  OK, I thought I knew where it was.  I looked at

  C:\Users\phyllis\AppData\Local\Adobe\InDesign\Version 6.0\en_US\Caches
  He has here called FindChangeData and FindChangeDataTmp files, but write them in the folder for the Version 7.5 does nothing.

  So I think I'm looking in the wrong place.  I'm moving all the queries search and replace in InDesign CS 5.5.  Can someone point me to them?

  Thank you, Phyllis

  Try C:\Users\\AppData\Roaming\Adobe\InDesign\------------.

• How to include a div with search and replace

  I need to include a < div >... < / div > in this div below to set the properties of the iframe in about 100 pages.

  " < div id ="Ingress2"> < iframe width ="100% "height ="415"src =" https://www.YouTube.com/embed/sKAMT9JW3Uw?list=PLfAeoO5XON0FemZ2KxTsM65r1kC-vRK68 "frameborder ="0"allowfullscreen > < / iframe > < / div > "

  I can inlude the punch opening div by < div id = "Ingress2" > < div > but how I can inlude the closure then (he reaplces all my iframes) < / div > with the find and replace tool?

  I tried to use the expressions in the tool, but I don't really understand how it works.

  Thank you in advance / / Annette

  Unfortunately, the forum software is to convert the part of my regular expression into a link. We'll see if it works.

  (
  )()
  

• How to find the string of TextFrame and replace (CS3)

  I want to search the textFrame chain after that I want to replace it. How to do in CS3. can someone tell me.

  Search / replace is a single operation. Unless for a particular situation, you don't have to search first. (By the way, if you do search for first and store the results, they will no longer valid after the change.)

  Management texts related support 'findText' and 'changeText' methods, so this code snippet

  app.findTextPreferences = null;
  app.findTextPreferences.findWhat = 'something';
  app.changeTextPreferences.changeTo = 'something';
  Alert ("this is a" + app.selection [0].constructor.name ' ");
  App.Selection [0] .changeText ();

  works fine if you select a block of text and run.

• How to automate the unique fusion of multiple JPEG to PDF files.

  I'm looking for an answer that does not purchase a license, or by downloading a shaded part of software.

  I have a batch of a software suite that creates multiple JPEG files every morning. The final product must be a single PDF, prefer it to order a certain way, but not completely necessary. I tried to do it thanks to Excel, but it was very awkward. I'm trying to implement through Adobe Action Wizard and can create the file I'm looking for, but I can't find how to automate in a batch file that I can task in Task Scheduler.

  Currently, I run a file backup all export to PDF and JPG. I then insert page for each PDF in the order I want to insert Pages using the. I can't understand how to automate the Action once it is implemented.

  These are designed to run early in the morning and the PDF picked up by different software and sent to before the start of the day.

  Any assistance in the automation of an action would help enormously.

  Thank you.

  I think you should forget Acrobat. Batch jobs need under license for this software. Acrobat is not. Software Adobe for the server might cost 100 times more.

• How can I use search and replace to replace the title of the doc with copy of the h1 content?

  I have a site with about 300 pages which have the same title. I need to replace this title by the same text that appears in the h1 tag on the page (each page is different). Of DW search and replace it? If so, how? I don't really want to go have to go to each page and copy/paste.

  jeffsure wrote:

  Is there a way to tell him to put only the first h1 tag in the title?

  I'm really motivated now to learn regex!

  Yes. Just use the following regular expression instead of the previous:

  [\S\s]+?

  )([^<>

  The field is to replace the same.

  The question mark is the [\S\s]+ a lazy search, stopping at the first]

  rather than doing a greedy research that concludes the last

  in the page.

  The regex for learning is difficult, but it can be very rewarding. I would only like the best.

• Advanced search and replace. How to replace the space with carriage return?

  10.9.13.0/24, 10.9.4.2/32, 10.9.4.3/32

  in

  10.9.13.0/24 10.9.4.2/32 10.9.4.3/32

  Find replace them ',' with carriage return.

  I still find articles on an advanced search and replace, but I can't seem to locate it.

  OS X El Capitan 10.11.3

  3.6.1 the numbers

  HI Brendan,

  You don't need an advanced find and replace for it.

  In the search box, press, then space.

  In the box replace by, press option-return.

  Then click Find and replace and find until you are finished.

  Kind regards

  Barry

• How to find quotes double in searching the Catalog Manager XML and replacement tool? Is it still possible without writing an XML file?

  I am struggling with the XML search and replace in Catalog Manager tool. I want to find a particular column, but due to generic problems, I want to find with the intact double quotes and then replace with double quotes too. For example:

  Front: "CSM_MBR_ASA_INP_EFF_DT"

  After: "Effective Member ASA entry Date"

  The problem with just the text, is that there are columns like CSM_MBR_ASA_INP_EFF_DT_NEW used in the reports that I don't want to touch.

  When I do the exact search and replace as above, I get no results.

  "

• How to upgrade the esxi 5.0 and 5.5 only give me the step in process setp.

  How to upgrade the esxi 5.0 and 5.5 only give me the step by step process.

  There are several methods supported for direct upgrade to 5.5 ESXi are:

  • vSphere Update Manager.
  • Interactive update of the CD, DVD or USB drive.
  • Scripted upgrade
  • esxcli
  • Automatic deployment

  You can find each method in this KB: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2058352

  Also a good interactive video updated via CD/DVD/USB. Upgrade to VMware ESXi 5.5 using Setup Interactive - YouTube

• How to automate the cutting through a visual basic 6.0 application tool?

  Original title: Visual basic 6.0

  How to automate the tool to cut through a visual basic 6.0 application. Or my visual basic 6.0 application is to take screenshots and save them as gif images, but the files are too big and take a long time to be sent by e-mail in real time. Please if someone could help, need a code in visual basic 6.0 to make these small files.

  Hello

  You can get support for development on the MSDN Forums tools.

  MSDN forums: Index

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Concerning

• RegExp search and replace, keep the formatting of the original text

  Hello!

  Will have to perform the Search and replace within a framework of text using RegExp.

  And to retain the original formatting of the text block.

  How is it possible?

  Bad example-, it converts all the text formatting to the format of the first character:

  var reg = /a/gmi;
  var replacer = '*';
  var fr = activeDocument.textFrames[0];
  fr.contents = fr.contents.replace (reg , replacer);
  

  

  Thank you!

  I has not yet been tested your code.

  But why you did not play with my code snippet, use something like this:

  // regex_changeContentsOfWordOrString_RemainFormatting.jsx
  // regards pixxxel schubser
  var s = /arguments/gi;
  var replacer = "other string", result;
  var atf = activeDocument.textFrames[0];
  
  while (result = s.exec(atf.contents)) {
      try {
          aCon = atf.characters[result.index];
          aCon.length = result[0].length;
          aCon.contents = replacer;
          } catch (e) {};
      }
  

  Try it and have fun

• How to automate the process of loading data using load file &amp; Task Scheduler

  Hello
  
  I do the automated processes to load the data into Hyperion Planning application using the file data_Load.bat & Scheduler of tasks.
  
  I created Data_Load.bat file, but the rest of the process, I cannot complete.
  
  Could help you me, how to automate the process of loading data using the file Data_load.bat & task Scheduler or what are the rest of the file is require it to achieve.
  
  Thank you

  In response to your question using the maxl for loading scripts?

  If Yes, I've seen and deliver in the batch (ex: load_data.bat) that is you do not have the path of the maxl script complete with a batch when passing through the event the task scheduler will work, but the log file and / or error will not be created. Which means lots claims it linked task scheduler, although he did not do what you need to.

  If you use maxl use this as the batch

  "essmsh C:\data\DataLoad.mxl" or you can also use the full path for the maxl or work elsewhere. The only reason why I think that the maxl can then not work is if you do not have the updated batch updated to call on all LANE changes maxl or if you need to update your environment variables to correct the command essmsh to work in a command prompt.

• How to automate the process of deploying VM?

  Are there sources where I could find info how to automate the deployment of virtual machines? For example, if I have to deploy 100 VM, how to add script, or maybe there are tools to do?

  Thanks in advance for the answers.

  I have not yet tested, but it should work if you have VI kit installation. If its only 10-20 why not plan tasks to clone vcenter and set the frequency to be repeated every hour and stop once you have done with all of them?

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

• How to choose the textfield values form and calculate

  Treat all

  Urgent please help

  How to choose the textfield values form and calculate totals. IE when clint fill amount textfield other textfields automatically calculate and display values. I am using uninstall.

  Thanks in advance

  My code is more

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"

  < title > Untitled Document < /title >

  < / head >

  < body >

  < table width = "400" border = "0" align = "center" cellpadding = "0" cellspacing = "0" >

  < tr >

  < td width = "187" align = "right" valign = "middle" class = "KT_th" > < strong >

  < label for = "amount_gbp" > total (GBP): < / label >

  < / strong > < table >

  < td width = "14" height = "30" > < table >

  < td width = "199" height = "30" > < label >

  < input type = "text" name = "textfield" id = "textfield" / >

  < / label > < table >

  < /tr >

  < tr >

  < td align = "right" valign = "middle" class = "KT_th" > < strong >

  < label for = "admin_char_gbp" > Admin amount (GBP): < / label >

  < / strong > < table >

  < height td = "30" > < table >

  < height td = "30" > < label >

  < input type = "text" name = "textfield3" id = "textfield3" / >

  < / label > < table >

  < /tr >

  < tr >

  < td align = "right" valign = "middle" class = "KT_th" > < strong >

  < label for = "agent_char_gbp" > Agent Charges (GBP): < / label >

  < / strong > < table >

  < height td = "30" > < table >

  < height td = "30" > < label >

  < input type = "text" name = "textfield4" id = "textfield4" / >

  < / label > < table >

  < /tr >

  < tr >

  < td align = "right" valign = "middle" class = "KT_th" > < strong >

  < label for = "total_amount_gbp" > amount Total (GBP): < / label >

  < / strong > < table >

  < height td = "30" > < table >

  < height td = "30" > < label >

  < input type = "text" name = "textfield6" id = "textfield6" / >

  < / label > < table >

  < /tr >

  < tr >

  < td align = "right" valign = "middle" class = "KT_th" > < strong >

  < label for = "total_paid_gbp" > Total paid (GBP): < / label >

  < / strong > < table >

  < height td = "30" > < table >

  < height td = "30" > < label >

  < input type = "text" name = "textfield7" id = "textfield7" / >

  < / label > < table >

  < /tr >

  < tr >

  < td align = "right" valign = "middle" class = "KT_th" > < strong >

  < label for = "balance_gbp" > balance (GBP): < / label >

  < / strong > < table >

  < height td = "30" > < table >

  < height td = "30" > < label >

  < input type = "text" name = "textfield8" id = "textfield8" / >

  < / label > < table >

  < /tr >

  < /table >

  < / body >

  < / html >

  Here´s a pointer which will show you how to set the calculation within a javascript function: dynamically calculate the sum of the fields

  See you soon,.

  Günter