How to avoid the images double click at check boxes?

Similar Questions

• How to replace the image on click

  Could someone tell me the correct terminology so I can look for more help? Or a pointer to a tutorial would be even better!

  I want to be able to exchange an image by clicking on a link that replaces one image with another.  I am familiar with the image swap on working capital, which is the only tutorials I seem to be able to find.  I don't know what to look for in fact.

  Thank you very much

  In this case, you can use a few methods.

  Swap Image behavior:

  Select the first image, go to the behaviors panel and select 'picture swap.   Select the image you want to swap to.  Then, you choose whether the action will be mouseover or onclick.

  DW help files will probably give a more more F1 help (although (I can't say I never watched upward-, but did not open at present to verify :-))) DW

  Or you might look also show/hide behavior. You could have the 2nd image in a hidden div that is 'shown' on the triggering (onclick or mouseover) action.   Again, the help files should give you more information.

  I hope this helps.

  --

  Nadia

  Adobe® Expert community: Dreamweaver

  --------------------------------------------------

  Unique templates CSS | Tutorials | SEO articles

  http://www.DreamweaverResources.com

  --------------------------------------------------

  Book: Ultimate CSS reference

  http://www.SitePoint.com/launch/005dfd4/3/133

  ---------------------------------------------------

  http://Twitter.com/nadiap

• How to avoid the Image being covered by text after resizing the browser [edited: how to push Gallery]

  I'm wondering - is it possible to grow a gallery or an image with a text block? especially on small screens.

  u can visit http://www.ideen-am-Bau.de and look at the homepage (bumps text on image on small screens)

  Sorry for the bad English ;-)

  Hi Thomas,

  After reproducing your query at my end, I found that the image overlaps the text only when the same straddles the design of the muse, the text should be able to push the image down only when you keep the two box block and image attached/far text each other, please try this and let know if it works for you.

  Kind regards

  _Ankush

• Question CP9: HTML5: Apple: Android: how to avoid the click on the Play button / tap?

  Hello

  Captivate 9.0.0.223: HTML5 draft.

  I'm sorry to ask this question, it's a little old chestnut on HTML5 in Apple iOS and Android.

  I have searched on the internet and forums for a solution underway, but could not find something that works.

  The problem is how to avoid the PLAY button, which forces the user to click / tap on it, when the project is accessible on an Apple or Android system.

  

  The project will be published on the internet for use on any Windows, Apple or Android device.

  I have no control over the Web server or devices that will use the people, so that any changes to the software server or browser is out of the question.

  I have tried both a plain HTML5 and a responsive project, but neither avoid the Play button. I put an example of 1 slide on these links.

  http://www.hoffits.com/test_responsive/index.html

  http://www.hoffits.com/test_html5/index.html

  The bottom line is: ' is it possible to remove the need for the user to click / press the Play button?

  Thank you.

  Peter

  Cardiff

  In Wales

  UK

  In your normal HTML5, there is a line (I think it's 46) with this code:

  CP. DoCPInit();

  Add cp.movie.play (); Located below.

  so:

  CP. DoCPInit();

  CP. Movie.Play ();

• How to change the highlight color, click the button image and text and sound.  are there packages of buttons for use in my project?

  How to change the highlight color, click the button image and text and sound. are there packages of buttons for use in my project?

  Hello

  Even if the point of things based Web links buttons created using them is of simple images. Captivate uses simple images. If you need to put your creative hat and not to let the fact that you see the word 'web' scared you somehow. An image is an image. Use on the web, use Captivate. Same case!

  If you change the properties of the button, you can activate the legend of success. Fix any sound that you like with the legend of success and it will play when you click the button. If you do not want to see the legend of success, delete the text and configure it as transparent.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• How to avoid the event doubleclick on a datagrid scrollbars?

  Hello.

  I have a datagrid.

  I need a cliccking of doubleclick event on a data grid line.

  I activated the doubleclick event. It works fine, when the doubling of the user on a line, something happens! In my case, I open a modal window. Great!

  Now the problem:

  The problem arises when the user clicks in a short time on a data grid (horizontal or vertical) scroll bar. In this case, a double click event is dispatched.

  But his intenton is just to scroll the grid, not more.

  Please, note that the dobule click on a scroll bar is a well-known action that can be performed in all applications and operating systems.

  I neet the event 'double click' just on a grid lines of data and not on its scroll bars. Cliccking twice or more on the scroll bar, I just want to scroll the grid. How can they avoid to send an event?

  Thank you

  Pbesi

  can't you just check the target of the double click event? If the target is an itemRender then do your thing, if not then don't

• Camileo S10 - how to avoid the 'information' during video playback on TV

  I just received my Camileo S10... very nice indeed... but how to avoid the track and reading data to be shown on the screen during playback on my TV...?

  Go to the movies, then before you start playing click the OK button. This also works when you save. You must do this before playing or recording.

• How to avoid the pictures to open automatically?

  Whenever I insert a SD card to download images Photos 1.2 app automatically opens.

  Quite annoying especially because I use this app at all.

  How can I avoid pictures opens automatically?

  Thank you!

  Photos doesn't have an option to disable the launch of all devices.

  When the Import Photos Panel opens, you should see a check mark in the toolbar 'Open pictures for the device'.   Clear this check box and Photos should not open again for this device (until you reformat the card).

  The automatic launch can be disabled for each camera separately.

  You can try this fix: this Terminal command allows to disable auto-start for any photo application, not just Photos.

  • Photos of quit smoking and unplug any camera.
  • Open a Terminal and paste this command and press return:

  defaults write currentHost - com.apple.ImageCapture disableHotPlug - bool YES

  • Restart the Mac. It is not necessary, but it worked for me after the reboot.

  I found this fix in a post of JadedEye ( leonie)

  https://discussions.Apple.com/message/29506561#29506561

• How can I disable by double-clicking an embedded video past in full screen?

  How can I disable by double-clicking an embedded video past in full screen?

  Hello

  I would sugegst you post the question on the link provided below for assistance.

  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/default.aspx

• How to avoid the glossy look and brilliant nostrils?

  I just built my first character of fuse and when I import into Photoshop, its nostrils are incandescent - as if the light shines through the back of his head!

  This fuse:

  

  Becomes this in Photoshop:

  

  I use a brush to set the nostrils, but have no idea how fix eye - of the suggestions?

  Even better - any ideas on how to avoid the glossy look and glowing nostrils?

  Thank you very much
  Malcolm

  Hey, Malcolm.

  Best way to explain what basically rendering 3D correctly really takes a lot of time, haha.  So that you may be able to work with the real-time 3D model and make changes quickly, we use two different rendering methods.

  There is an "Interactive" mode which is not like the beautiful light/shade, but is very fast - and that's what you see when you interact with the default template.

  Then, there is a mode "Raytraced" which is much more advanced calculations and stuff to give you a proper lighting / shadow.  Raytraced rendered may take time if so we can not use it all the time.

  In order to get the lights/shadows appropriate you need to perform a path Ray would make on the document.  Best way to do this:

  • Select your 3D layer in the layers panel
  • Make a selection in the drawing area to the area that you want to make (I recommend to test rendering of area to check the lighting/shadows before committing to make the whole layer).
  • Push the button is rendered at the bottom of the properties panel (it looks like a cube in a rectangle box, right next to the delete icon).

  There are other things that you must do if you want to get the best image search quality such as the addition of secondary lights!  You can add more lights in the 3D Panel using the small icon of light at the bottom.  Have 2-3 stage lights and adjusting their colors can make a big difference with the Assembly of your character in the scene.  Here is a small image for some comparisons:

  

  You can see the image with two lights a look much more realistic lighting and shadows and raytraced of one and two versions are much nicer and cleaner!

  Hope that helps!

• How to change the image on the layer of the photo?

  How to change the image on the layer of the photo? I accidentally chose the wrong design and I'm not able to delete/modify it. Already, I had little work, so the change in office had to happen sooner.

  Sara

  To change the image in the photo layer

  1. Select the layer of the photo in layers;

  2. click on the button to learn more.

  3. delete the current photo;

  4. the layer is reset with no picture

• Create a slide show and change the image by clicking on it? (!)

  How can I create a slide show and change the images by clicking on them?

  here you can find an example: http://www.thisiscatalogue.co.UK/around-the-way/

  Thank you!

  solved

• If anyone can help with how to get the image

  a database in a view using Dreamweaver page?

  I have a page with a recordset and a database with text and images. The image field has a link to the file and the image as in /images/image1.jpg including the size.

  The thumbnail I want to display on a page of the main display is in the database using varchar with a link like /images/image1.jpg

  When someone wants to see the master page, they click on a link and everything which has been entered showing the database. At least everything except the image.  Right now it shows just /images/image1.jpg

  I don't know how to call the images to the database.

  Thanks for the help and information.

  conch,

  Check the entry of the database, and you may also have too many tags...

  In addition, check to see if your pictures folder is in the root directory, such as an incorrect path can complicate things.

  If this site is located on a remote server, feel free to send me the link here or by e-mail: [email protected]

  In addition, if you have a screenshot, it would be useful.

  Hang on!

  See you soon,.

  wordman

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• How to disable the image previews

  In the windows client there is an option to disable the image previews with

  Tools-> Options-> settings IM-> Show advanced options. Uncheck the option: "show images in conversations".

  In the client Mac there isn't this option. How to disable the image previews in a Mac client?

  OK, found the solution in another thread here: http://community.skype.com/t5/Mac/YouTube-thumbnails-amp-link-previews-Why-don ' t-I-see-them/m-p/39692...

  Menu bar-> display-> display Images-> uncheck