Windows Update (KB2541763) has screwed my computer and I can't uninstall it!

Similar Questions

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.

• I have adobeXI stuck in limbo in my computer. I can't uninstall it or install any new version, and adobe does not work properly. What can I do?

  Adobe XI is stuck in limbo on my computer and I can't uninstall it or install update for adobe systems. What can I do to get rid of this one and install a update or at least a version I can use?

  Hi maggieg30085397,

  If you're on windows computer try uninstall using this cleaner tool Download Adobe Reader and Acrobat tool - Adobe Labs.

  Reboot your system and install the latest version using this link Adobe - Adobe Acrobat Reader DC Distribution.

  I would like to know if it works.

  Kind regards

  Nicos

• I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  For Photoshop CS2 activation has been reprocessed, so your original drive and the serial number does not work.

  As an owner of CS2, Adobe has a copy without activation and serial number, to which you are entitled.

  The serial number is to the right of the download link for Windows. You'll need this one, not your old number.

  Get them here: download Acrobat 7 and CS2 products

• It has been updated the program on my computer and all of a sudden stopped at 83.3% can help

  It has been updated the program on my computer and all of a sudden stopped at 83.3% can help

  Hello

  Could you please provide the name of the application you are trying to update.

  Kind regards

  Hervé Khare

• No windows update will install on my computer.

  No windows update will install on my computer. Tried to remove and disable the Antivirus software, but I can not install any of them. When I downloaded and tried to install Service Pack 2 it returned this error "E_UNEXPECTED 0x8000ffff".

  Any thoughts?

  Hi Aaron,

  There are several resolutions by Microsoft engineers, described in detail in another thread on this forum: http://social.answers.microsoft.com/Forums/en/vistawu/thread/ecab6071-9b1a-465b-a451-06cd1c24a671.  One of these recommendations should solve your problem.

  Barbara

• Windows Media Player has encountered a problem and needs to close

  Original title: Window Media Player

  I run Window XP Professional Service Pack 3. My Window Media Player suddenly opens for a second and disappears again. I downloaded the software again, but nothing has changed. I downloaded Microsoft troubleshooting software, there is no full download, it came with "Troubleshooting cannot continue because an error has occurred 80040402 cod."  The last time I went to Media Player, he had an error message: "Windows Media Player has encountered a problem and needs to close. AppName:wmplayer.exe, Mod/worm: 11.0.6000.7000, AppVer: 11.0.5721.5262 Offset: 000aba9e, ModName: 01key indiv. I managed off option and need really professional help from somewhere.

  Walter

  Click Start

  Select Control Panel

  If it is in Classic view, select performance and Maintenance

  Select System

  Select the Hardware tab

  Select Device Manager

  In the list of devices, you see all of the devices listed with yellow exclamation points?

  If update you the device drivers for these devices from the device manufacturer.

• Windows Update keeps trying to install K2686828 and KB2656369.

  Windows Update keeps trying to install K2686828 and KB2656369.  Whenever I tells me the installation succeeds only to ask again to update.  I tried the fix - it solutions, and they have not corrected the problem.  Also, I did a virus scan and found nothing.  All my other updates were installed without problem.

  This problem is related to the MSI registration information inconsistancies.  I was able to fix by using a cmd "msiexec /i {C09FB3CD-3D0C-3F2D-899A-6A1D67F2073F} ADDLOCAL = ALL/l * v % temp%\repairLog.txt.  At the end of this process, the two installed normally KB and I have now no critical updates in the meantime.  I noticed that article 917964 described a situation where IE would not work if the repairs were made the xp without removal of IE8 or IE 7 first.  My IE 8 works fine.  By 917964, "before you perform a repair of Windows XP installation, you must uninstall Windows Internet Explorer 7 or Windows Internet Explorer 8 of the Windows XP computer.". If you perform a repair of Windows XP installation, when a later version of Internet Explorer is still installed, Internet Explorer does not once the repair is complete. »

• I had to reinstall Windows XP on my computer and I can not validate my windows activation code.

  I had to reinstall Windows XP on my computer and I can not validate my windows activation code

  original title: activation code

  The computer came with windows pre-installed, and I use the restore disc accompanying Blair Technology Group, LLC. I bought both systems and I've been using just one of the restore disks which I had used on the other system a couple of times. I'll start again and use the disk I have not opened yet on this other system. The message I get, it is that when I run windows update may not check the authinticity and told me that I could have a pirated copy of windows.

• I am reinstalling a version update of xp on my computer and can't find the product keys doe someone at - it suggestions?

  Original title: Reinstall windows xp on the computer and cannot find my produst key suggestions

  I am reinstalling a version update of xp on my computer and can't find the product keys doe someone at - it suggestions?

  Hi johnan12,
   
  You will need to contact the Microsoft customer and Service support for a replacement product key.
   
  For more information, see:
  How to identify, locate, and replace a product key

• When you try to use windows update I get this error: error number: 0 x 80070424. In addition, automatic updates in Security Center is disabled, and I can't activate it.

  When you try to use windows update I get this error: error number: 0 x 80070424.  In addition, automatic updates in Security Center is disabled, and I can't activate it.

  Tre,

  A KB was created for the error code 0 x 80070424 that appears when you install Microsoft Windows Update/Microsoft Update. The KB includes an automated Microsoft Fix it 50686 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/968002>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MS fix 50686.msi.

  `~`

  Suggest that you first spread malware as the cause of the problem by following these steps:

  (1) have your system scanned by the antivirus/security suite installed.
  (2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSS

  http://support.Kaspersky.com/viruses/solutions?QID=208280684>
  (3) download, install, update and run full scans with two of these tools free anti-malware:

  MalwareBytes AntiMalware

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  (4) run the Windows XP and Windows Server 2003 System File Checker (Sfc.exe) tool:

  http://support.Microsoft.com/kb/310747>

  `~`

  If no malware has been detected, there's a Fixit on this page which will reset the Windows Update components:

  How to reset Windows Update http://support.microsoft.com/kb/971058components >

  Suggest you download and Save it. Then, close all the open programs and web browsers.
  Run Microsoft Fixit 50202.msi and choose its default mode.
  After that he finished the race, see if the return code is displayed again when looking for updates.

  If not, then run the Fixit once more and choose his Aggressive mode.
  Restart once it is finished and see if the return code always appears when the updates.

  IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.

  Please let us know if it did or did not help to solve your problem.

  If this ANSWER helped, my post as ANSWER of marking close your thread.

  06/26 / 1108:34:03

• We try to update the software on a computer and continue to receive the error 1719:

  We try to update the software on a computer and continue to receive the Error Message 1719: "Installer cannot access the Windows service". We tried to repair Windows install several times by the cancellation of registration registration without success. Windows Installer continues to block the update of the program

  We tried to install a new version of Kaspersky and have met the above problems.

  Hi Jug,

  Thanks for posting the question on the Microsoft Community Forums. I understand that while trying to update the software, you get an error 1719: "could access the Windows service install.

  This question is can be caused due to:

  You install or remove a program that uses Microsoft Installer Service to install a program on your computer. The Windows Installer Service is not running. The Windows Installer registry settings may be damaged or wrong.

  I suggest you check out the link to the troubleshooting steps.

  Error "The Windows Installer could access the Service" when you install or update programs on Windows 7 or Windows Vista.

  http://support.Microsoft.com/kb/2642495

  WARNING:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

  How to back up and restore the registry in Windows.

  If still the problem persists after you perform the steps of troubleshooting from the link and if you have questions related to Windows, please do not hesitate to answer us, we will be happy to help you.

  Thank you.

• Windows update fails to initialize wuauclt.exe and window update will not work.

  Windows update fails to initialize wuauclt.exe. Update history shows update Cumulative security for Internet Explorer 9 for Windows Vista (KB2699988) has failed. Command window appears every 20 seconds in train to run wuauclt.exe and closes instantly.

  I tried to restore to a restore point prior (Windows Vista Home Premium 32 bit Service Pack 2). I also run AVG Anti-virus (no virus not detected) and Microsoft Fix it Microsoft difficulty he says he finds and correction of errors in windows update, but the problem persists.

  Any help is appreciated.

  Hi Patrick_Sims,

  1. you receive an error with the message code?

  2. what Fixit did you run?

  Method 1:

  You can reset Windows Update components and check if it helps:

  How to reset the Windows Update components?

  For more information, you can also refer to the following article:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  Method 2:

  You can try to install the stand-alone package to update based on the version of Windows Vista installed and check if it helps:

  For Vista 32 bit.

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2699988)

  For Vista 64 bit.

  A security update cumulative for Internet Explorer 9 Windows Vista x 64 Edition (KB2699988)

  For more information, see the article:

  My PC running the 32-bit version or 64-bit Windows?

• When windows update is running on my machine (and updates), my screen goes down to 1024 x 768.

  When windows update is running on my machine (and updates), my screen goes down to 1024 x 768.  I have a HD card of ATI all-in - Wonder and an Acer X203H LCD with DVI connection.  If I use system restore to go back, I can get higher resolutions, but Windows does its thing and I'm back at low resolution.  I can't change the settings manually as 1024 watch as the highest res available to the general public when this happens.  There must be some weird conflicts.  I tried to update the drivers, that made no difference.  Is there a setting Aero or the conflict at stake here?  In the past, I've had trouble with a display of balnk and I had to go back to the 2008 version of the driver to get things to work.  From there, whenever I update, I can keep high resolution, but after the last windows update (security of IE8 and much smaller pack that was released on March 28-30), it dates back to 1024 x 768 again.  Control Panel and catalyst control the two show that as more high resolution available for refresh rate. Suggestions?

  Change your update settings to find the problem, we > then right-click on > hide.

  And don't do hardware drivers through Windows updates.

  Find them in the equipment or the system direct manufacturer.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista

  Download updates but let me choose whether to install them - if you select this option, Vista will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  See Update above settings to solve this problem

  See you soon.

  Mick Murphy - Microsoft partner

• Please help I'm looking for the dowload 10.10 update my dads computer and I can not find it! Does anyone know where could it have?

  Please help I'm looking for the dowload 10.10 update my dads computer and I can not find it! Does anyone know where could it have?

  10.10 is no longer available unless you had previously downloaded. In this case, it would be in the purchase of the Mac App Store section. Its not available for direct plus download.

  You can directly update 10.11 El Capitan.