How to avoid the launch of Labview VI when he invokes in Teststand environment?

Similar Questions

• How to avoid the launch of Labview when called by Teststand VI

  Hi, friends.

  I am a student of teststand. I wrote a few screws by Labview. Now, I want to invoke in teststand environment. But when I run the sequence. LabVIEW automatically launches. How to avoid the launch of Labview when I run the sequence?

  Thank you.

  I'm not sure that I follow what you're saying...  But it seems that when the VI is called, the LabVIEW Development software is started and you want to avoid this.

  If you create an executable file or a dll and that any call within TestStand, she should not call the development environment.  You must have the LabVIEW runtime engine installed on the target computer.

  For several years I used TestStand with LV, if my memory does not have to be precise.  I think that the above worked for me.  However, it seems that I remember something to have the LV code in debug mode, causing to open development environment... but it's a distant memory.    You do not use breakpoints where the LV VI is called, are you?

  R

• How to avoid the export of DB links when you export using exp?

  Hello
  I am trying to export dump of data from tables from test@env1 to test@env2 in user mode. My requirement is to move all tables/roles/indexes...etc. data from one database to another DB with move them any link DB, I wrote below do this with considering them exclusion DB Link.
  
  Can someone tell me how to avoide DB lie then export? So that when I import the .dat file and existing DB links in test@env2 would not get affected. Y at - it something like exclude in convensional exp? (not expdb).
  
  I also intend to disable all triggers in target environment during import. Is it OK?
  
  
  (Step 1) Procedure to disable triggers in test@env2.
  DECLARE
  l_tri VARCHAR2 (2000);
  CURSOR cur_tri
  IS
  SELECT table_name,
  trigger_name
  Of all_triggers
  Owner where IN ('TEST');
  BEGIN
  I'm IN cur_tri LOOP
  RUN IMMEDIATELY "ALTER TRIGGER ' |" i.trigger_name | "DISABLE";
  END LOOP;
  END;
  /
  
  
  -EXPORTER-
  (Step 2)
  Export file:params.dat Param
  QUEUE = test.dmp
  OWNER = test
  TRIGGERS = n
  GRANTS = y
  LINES = y
  COMPRESS = y
  
  (Step 3)
  test/test_pass exp PARFILE = exp_params.dat
  
  (Step 4)
  Import the file:exp_params.dat Param
  QUEUE = test.dmp
  OWNER = test
  TRIGGERS = n
  GRANTS = y
  LINES = y
  COMPRESS = y
  
  
  -IMPORTANT-
  (Step 5) followed by importing a file param
  
  Import file Param: imp_params.dat
  QUEUE = test.dmp
  FROMUSER = test
  TOUSER = test
  TABLES = (*)
  
  (Step 6) followed by import
  IMP test/test_pass PARFILE = imp_params.dat
  
  Any help would be appreciated.
  Thank you.

  Can someone tell me how to avoide DB lie then export? So that when I import the .dat file and existing DB links in test@env2 would not get affected. Y at - it something like exclude in convensional exp? (not expdb).

  I fear this is not possible in normal export.but is possible with EXCLUDE prameter in expdp (but I've never tested and just assuming). You can give a try

  I also intend to disable all triggers in target environment during import. Is it OK?

  He can do faster import

• How to avoid the af:dialog of showed when af:table is empty?

  Hello
  
  Is it possible to disable af:dialog if the table has no records? And re - activate when adding new records... ?
  
  And also a supplementary question on af:dialog, how do I close the dialog box after my personal touch?
  
  Thank you

  Hello

  Add partial refresh button by setting the property partialTriggers to the id of the table. If he was already added and you use Jdev 11 g, use the visible property instead rendered property.

  Jean Lou

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• Camileo S10 - how to avoid the 'information' during video playback on TV

  I just received my Camileo S10... very nice indeed... but how to avoid the track and reading data to be shown on the screen during playback on my TV...?

  Go to the movies, then before you start playing click the OK button. This also works when you save. You must do this before playing or recording.

• How to avoid the minimizin of the screen when the user down ups slide

  How to avoid the minimizin of the screen when the user ups the down slide.

  Hello

  I guess that not possible because this is a feature of the system. Be able to substitute the blow to the gesture of bottom up would mean for combat when a user can switch to another application. It is not something that an application must be able to do it at all.

• How to avoid the string * empty * on new pushScreen

  Someone knows how to avoid the string * empty * coming on each press of the screen and instead * void * can I have my own channel at the same place... Please let me know its possible or not...

  

  Thank you

  read the API:

  http://www.BlackBerry.com/developers/docs/4.7.0api/NET/rim/device/API/UI/component/ListField.html#se... (java.lang.String, int)

• How to avoid the color address IOS in email HTML Template?

  Hello

  How to avoid the color address IOS in email HTML Template?

  Thank you

  Rahul Bhambri

  Hello Rahul,

  Please use css in your style sheet

  a {[x-Apple - detectors of data]

  color: inherit! important;

  text-decoration: none! important;

  font size: inherit! important;

  Police-family: inherit! important;

  Police-weight: inherit! important;

  line-height: inherit! important;

  }

  Thank you

  edynamic expert Eloqua

• How to avoid the report query needs a unique key to identify each line

  Hello

  How to avoid the error below

  The report query needs a unique key to identify each row. The supplied key cannot be used for this query. Please change the report attributes to define a unique key column.

  I have master-detail tables but without constraints, when I created a query as dept, emp table he gave me above the error.

  Select d.deptno, e.ename

  by d, e emp dept

  where e.deptno = d.deptno

  Thank you and best regards,

  Ashish

  Hi mickael,.

  Work on interactive report?

  You must set the column link (in the attributes report) to something other than "link to display single line." You can set it to 'Exclude the column link' or 'target link to Custom.

• Question CP9: HTML5: Apple: Android: how to avoid the click on the Play button / tap?

  Hello

  Captivate 9.0.0.223: HTML5 draft.

  I'm sorry to ask this question, it's a little old chestnut on HTML5 in Apple iOS and Android.

  I have searched on the internet and forums for a solution underway, but could not find something that works.

  The problem is how to avoid the PLAY button, which forces the user to click / tap on it, when the project is accessible on an Apple or Android system.

  

  The project will be published on the internet for use on any Windows, Apple or Android device.

  I have no control over the Web server or devices that will use the people, so that any changes to the software server or browser is out of the question.

  I have tried both a plain HTML5 and a responsive project, but neither avoid the Play button. I put an example of 1 slide on these links.

  http://www.hoffits.com/test_responsive/index.html

  http://www.hoffits.com/test_html5/index.html

  The bottom line is: ' is it possible to remove the need for the user to click / press the Play button?

  Thank you.

  Peter

  Cardiff

  In Wales

  UK

  In your normal HTML5, there is a line (I think it's 46) with this code:

  CP. DoCPInit();

  Add cp.movie.play (); Located below.

  so:

  CP. DoCPInit();

  CP. Movie.Play ();

• How to avoid the glossy look and brilliant nostrils?

  I just built my first character of fuse and when I import into Photoshop, its nostrils are incandescent - as if the light shines through the back of his head!

  This fuse:

  

  Becomes this in Photoshop:

  

  I use a brush to set the nostrils, but have no idea how fix eye - of the suggestions?

  Even better - any ideas on how to avoid the glossy look and glowing nostrils?

  Thank you very much
  Malcolm

  Hey, Malcolm.

  Best way to explain what basically rendering 3D correctly really takes a lot of time, haha.  So that you may be able to work with the real-time 3D model and make changes quickly, we use two different rendering methods.

  There is an "Interactive" mode which is not like the beautiful light/shade, but is very fast - and that's what you see when you interact with the default template.

  Then, there is a mode "Raytraced" which is much more advanced calculations and stuff to give you a proper lighting / shadow.  Raytraced rendered may take time if so we can not use it all the time.

  In order to get the lights/shadows appropriate you need to perform a path Ray would make on the document.  Best way to do this:

  • Select your 3D layer in the layers panel
  • Make a selection in the drawing area to the area that you want to make (I recommend to test rendering of area to check the lighting/shadows before committing to make the whole layer).
  • Push the button is rendered at the bottom of the properties panel (it looks like a cube in a rectangle box, right next to the delete icon).

  There are other things that you must do if you want to get the best image search quality such as the addition of secondary lights!  You can add more lights in the 3D Panel using the small icon of light at the bottom.  Have 2-3 stage lights and adjusting their colors can make a big difference with the Assembly of your character in the scene.  Here is a small image for some comparisons:

  

  You can see the image with two lights a look much more realistic lighting and shadows and raytraced of one and two versions are much nicer and cleaner!

  Hope that helps!

• How to avoid the FDM-command being moved files from the OpenBatch folder

  Hello world
  
  I have a little problem with Batch Processing of the FDM - I need to stop the movement of files in the folder OpenBatch - when a batch is executed.
  
  The installer by using the Task Manager, a load a Batch Script and Script integration all works very well. However, the process must run every 3 hours, so I need the file "A_LedgerTransLocation_Actual_nov - 2013_RR.txt" to remain in the \Inbox\Batches\OpenBatch\ folder at any time.
  
  How to avoid the file is moved?
  
  
  Best regards
  Frederik
  
  
  
  
  PS: I noticed on the OTN Forum is it may be possible to script a solution such as:
  
  FSO1 = CreateObject ("Scripting.FileSystemObject") set
  Set File1 = FSO1. GetFile ("FDM Directory\FDM Application\Inbox\Batches\Openbatch\A_LedgerTransLocation_Actual_nov-2013_RR.txt")
  The BATCHENG value. PcolFiles = BATCHENG.fFileCollectionCreate (CStr (strDelimiter), File1)
  
  However this is not possible, as the controllers of the company need to edit the. TXT file themselves. They will not be able to edit the script too.

  I don't think you can prevent the FDM, move the file. I'm assuming that the file change in each period to use the last period of POV, so I think that option easiset to copy the file (based on a part of the name (location?) to a temporary location before began the FOM and write again later.)

• How to avoid the link of a null value in a column of link

  Hello
  
  How to avoid the link of a column with the value zero. Is that the link should be disabled for the column with the value null, and it must be enabled for all that have a value.
  
  Ex
  
  DEPTNO NAME (link column)
  
  10 SCOTT
  20 MAC
  30 SMITH
  40         -
  50 SAM
  
  I don't want to link to the value null in the name column, but the name remaining should have link. Please help me.
  
  
  Kind regards
  Barro

  Hello

  One way is like this:
  1. create a column not displayed, called link_display in your report to return N or Y depending on whether you want the link by adding the SQL report:

      NVL2(name, 'Y', 'N') link_display 
  

  2. in the header of the region, define a class for the column name using:

  3. for the name column containing the link add link attributes: class = "" display_link_ #LINK_DISPLAY # ""

  Rod West

• Re: How to avoid the password displayed in the Unix box APPS.

  Hello
  
  
  How to avoid the APPS password displayed in the Unix box using the command ps for concurrent program with the run method defined as 'host '.
  
  Kind regards.

  Salvation;

  What is the version of the EBS?

  Please see:
  Apps to hide password
  Hide the apps password

  Respect of
  HELIOS