How to bind the requirements to the cycle of the target using OTA

Similar Questions

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart

• How to change the rendering used for video playback in Windows Media Center Version 6 engine

  I usually use other media players, but I would like to first of all using Windows Media Center. However for the moment video playback is not good because of the weird colors (everything is displayed in black and Red instead of normal colors). When you use other media players, I use the Haali rendering engine which gives good results for video playback.

  Can you tell me how to change the rendering used by Windows Media Center?

  Also, I noticed the same weird color effect in Windows Media Player 11.

  Hi Woobee,

  1. What is the brand and model of the computer?

  2. what graphics card use on the computer?

  If you are using an Nvidia graphics card on the computer, in the Nvidia Desktop Manager, you will find an option for saturation to ensure it is set to 100%.

  And if you are any other graphics card on the computer and search for a similar option for saturation.

  If the previous step fails in Windows media player, so be sure that the hue and Saturation are defined by default.

  1. click on the arrow on the tabplaying , point to enhancements, and then clickcolor picker.

  2. do one of the following:

  1. to return to the default color, click thereset link.

  Also, make sure that the video settings are set by default.

  1. start the playback of a file.

  2. click on the arrow on the tabplaying , point to improvements, and then clickvideo settings.

  3. click onreset.

  Check also in Windows Media Center if the

  1. on theStart screen, go to tasks, click settings, clickgeneral, then Visual and sound effects.

  2. undercolors ensure that Windows media center standard is enabled.

  Turn off Visual and sound effects in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-Visual-and-sound-effects-in-Windows-Media-Center

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to start the database using CRS to start the database instance

  Dear Experts,

  How to start the database using CRS to start the database instance

  As a solution: remove the write permission on the/etc/oratab user database to prevent update to arrive.

  There is no harmful effects known to CRS / RDBMS operation if this workaround solution is used. This has been discussed in Bug 13028802.

• How to know the tables used in packages of a schema.

  How to know the tables used in packages of a pattern that I have connected.

  SELECT DISTINCT referenced_owner, referenced_name

  Of all_dependencies

  Owner WHERE = "MY_USER_NAME".

  AND type ('PACKAGE', 'BODY of PACKAGE')

  AND referenced_type = 'TABLE '.

• How to identify the fonts used in text format?

  How to identify the fonts used in text format?

  Hi DSB.

  Open the document in Reader, go to the menu file-> properties, then click on the tag are. You will see a list of the fonts used in the document.

  Another option is to copy the text and paste it into MS Word, where you can simply move your mouse over the text to display the name of the font.

  Kind regards

  Nicos

• How to know the database uses pfile or spfile?

  Hi guru
  
  How to know the database uses pfile or spfile?
  
  
  
  Thank you

  Thank you for this question of doc!
  Please type in sql * show spfile parameter.
  If it is empty, you do not use a spfile.

  --------------
  Sybrand Bakker
  Senior Oracle DBA

• Help, how to query the database using pagination

  Hello
  
  How to query the database using paging for large data.
  
  any API for this?
  
  Thank you in advance!

  Hello

  You can specify XmlQueryContext::Lazy as the type of assessment and only call XmlResults:: next() comes as many times as you need.

  John

• How to bind the elements in the PC, items added in the "edit items...". "list of combobox

  Hello

  Could someone please tell me how can I bind the items added in the "combo box" could be linked to files saved in my PC and if a new file is added in the same folder in my PC, it could be added directly to the list of the combo box items... Thanking you in advance

  Concerning

  Julien

  Thank you very much...

• How to bind the AM method to EL

  I want to connect the AM method in EL expression to control the user interface component attribute made,.

  {in my AM I create a method and expose this data control method, rendering for the UI component attribute is defined as that "rendered =" #{bindings.isRayTesting.result ""} ", it seems that this method cannot be performed until the page is rendered,

  How do I make the excute method before the page is rendered.

  the AM method

  for example:

  	public boolean isRayTesting() {}
  	Returns false;
  	}

  {in my AM I create a method and expose this data control method, rendering for the UI component attribute is defined as that "rendered =" #{bindings.isRayTesting.result ""} ", it seems that this method cannot be performed until the page is rendered,

  To call the method that is exposed in the pagedef using EL, you need something like: #{bindings.isRayTesting. {Run} so there is no way to implement your use case using only the EL.

  Check this post for alternatives: https://blogs.oracle.com/adf/entry/an_epic_question_how_to

  Also, many of the properties of the JSF component (as "lent") are evaluated several times in the life cycle JSF request so an expensive operation in them can significantly degrade performance.

  Dario

• How to bind the user interface component to a display object that is created from a SQL query

  I use JDeveloper 11.1.1.2.
  
  I created a method in my ApplicationModule to create a dynamic ViewObject instance based on a 'voCode"passed in:
  
  public loadVO (String voCode) {} ViewObject
  
  ViewObject viewObject = findViewObject (voCode);
  If (viewObject == null) {}
  viewObject = createViewObject (programCode);
  }
  return viewObject.
  }
  
  I created a Client interface for this method and updated the control data of the ApplicationModule.
  
  The "Oracle JDeveloper 11g Handbook", I should be able to create a link from the tree and an executable methodIterator to the method of "loadVO" through the control of AOS data.
  
  I tried to manually add the binding to the definition of the page my page jspx, I like to see if I can replace an existing binding with this new binding.
  I was not able to add the link under "tree to create binding" 'Root Data Source' both 'Tree level rules' must be specified.
  I was able to specify the root 'Data Source' to point to the "loadVO" and the corresponding parameter, but not able to add a rule.
  When I clicked on the icon "+" to add the rule, anything that allowed me to clarify the rule (if I know which rule I should add).
  
  How can I bind the module of the application 'loadVO' method while it is exposed in the data control to provide data to a UI like PivotTable component?
  
  On the other hand, I was able to create the "methodIterator" first for the method 'loadVO' AM but I wasn't able to create a tree link to refer to the "methodIterator".
  Is it possible to call the method loadVO with the value of specific setting via the "methodIterator" of a bean method?
  
  Published by: pyin_amec on January 25, 2010 15:57
  
  I've corrected the subject line and change my question to better reflect the problem I tried to solve.
  
  Published by: pyin_amec on January 26, 2010 07:41

  Hello
  It worked for me... I created an inputtext area where I can enter a query and run...
  It could be that useful...

  AM Impl

       public void createVoWithQuery( String pQuery )
       {
  
            ViewObjectImpl vo = null;
            if( findViewObject( "DemoVo" ) != null )
                 findViewObject( "DemoVo" ).remove();
  
            vo = ( ViewObjectImpl )createViewObjectFromQueryStmt( "DemoVo", pQuery );
            //  vo.setKeyAttributeDefs( new int[]{0} );
            vo.executeQuery();
       }
  
       @Override
       protected void prepareSession( Session session )
       {
            super.prepareSession( session );
            if( findViewObject( "DemoVo" ) == null )
                 createViewObjectFromQueryStmt( "DemoVo", "Select 1 from dual" );
       }
  

  Page Def

  page

• How to bind the points left in the Microsoft Library

  I have documents stored in the part library materials - an example would be a report card scanned.

  I have pictures which was held as part of photo library - an example would be a photograph of the school.

  I have audio files which was held as part of the library music - an example would be the voice of a child for registration.

  All the foregoing is directly related, and what I want to know - is possible to connect the three elements that has someone opening (for example) the pdf file in the documents library as there are two other elements (directly related) place elsewhere in the library? It would be useful if someone wanted to delete an item without realizing that the other elements are linked to it.

  Another example:

  A brochure of the theatre (pdf) which was held in documents - where our children were part of a production.

  A film of the show in the videos.

  Pictures of before, during and after the show.

  Again, it would be useful to "bind" the elements in a way so that anyone (other than the originator) knows that what is perceived also has linked items.

  A final example (for years).

  Invitation of marriage service (word document), the list etc.

  Wedding photos.

  Wedding videos.

  Audio file of the days proceedings.

  I forgot to say running Windows 7 Professional on a desktop with 300 GB of 'stuff' in the library. For safety, I copy the contents of the library to two external drives.

  Also, I have a laptop running Windows 8.1 and have these machines (and others) on homegroup.

  All machines are up to date with all updates Microsoft etc..

  M

  Microsoft operating systems have containers where you can put all the content together.  Right click and create a new folder for "Report card" and put all your stuff on the report in there (photos, Documents, everything).  And when you open it, if you wish, you can always display them in sections so that you know what's different:

  

• How to bind the 'Visible' attribute programmatically

  I use 11.1.1.6 JDeveloper.

  
  

  I have a MyBean method:

  Boolean isImgVisible() {}

  a logic here

  }

  
  

  If I have a page fragment with

  < af:image visible = "#{pageFlowScope.myBean.imgVisible" "

  ID = "i2" source="/Images/img.gif"/ >

  The 'Visible' link is ok

  
  

  But I want to do it programmatically
  

  
  

  In my bean, I created a RichImage

  
  

  RichImage img = new RichImage();

  img.setSource("/Images/progress.gif");

  IMG.setVisible("#{pageFlowScope.myBean.imgVisible");  This does not of course

  How to link the method above (isImgVisible()) 'Visible' attribute programmatically?

  Thank you

  In case someone needs it:

  RichImage img = new RichImage();

  img.setSource("/Images/progress.gif");

  img.setValueExpression ('visible' createValueExpression ("#{pageFlowScope.myBean.imgVisible"));

  Helper method

  public createValueExpression (string expression) {} ValueExpression

  FacesContext facesContext = FacesContext.getCurrentInstance ();

  Application app = facesContext.getApplication ();

  ExpressionFactory elFactory = app.getExpressionFactory ();

  ELContext elContext = facesContext.getELContext ();

  ValueExpression valueExp =

  elFactory.createValueExpression (elContext, expression,

  Object.Class);

  Return valueExp;

  }

• How to bind the mouse in 3D event

  I want to bind the mouse click event of a button with z > 0,

  but the area can cause the button event is false. Smaller than the form, I can see in the player.

  I don't know what should be noticed when link 3d mouse events?

  forward to your response, thank you very much.

  in the document class, I wrote:

  This.x = 0;

  this.y = 0;

  this.z = 10;

  this.btnPrev.addEventListener (MouseEvent.CLICK, this.onPrevClickH);

  btnPrev is added by the flash IDE

  This.x = 0;

  This.y = 0;

  This.z = 10;

  this.btnPrev.addEventListener (MouseEvent.CLICK, this.onPrevClickH);

  btnPrev is added by the flash IDE

  You change the z order of the Timeline object main... I think you want the button change z pos, not the entire timeline. If you simply change the z to the button of the affected area will work as expected. So, the above code would be:

  btnPrev.x = 0;

  btnPrev.y = 0;

  btnPrev.z = 10;

  btnPrev.addEventListener (MouseEvent.CLICK, onPrevClickH);

  btnPrev is added by the flash IDE

• How to create the Table using the column Drag and Drop feature

  Hello:
  I'm new to Data Modeler tool Oracle SQL dev and would like to know if there is a way to create a new table by reusing existing columns or groups of columns. The idea is to maintain consistency and save time of table design. If the columns created previously can be reused and require, drag and drop column in the right pane, then only new columns must be created manually.
  
  Any thoughts on this will be appreciated.
  
  Thank you!

  Yes - just change the name of the model table in the script (t_name = "table_template") then save this new transformation for later use.

  I don't know how to apply only some of the tables. Seems like something you could do to a secondary view level?

  Perhaps someone else on the forum can advise how to change the script to work on a subview only instead of the whole model.