Satellite Pro 480cdt - installation of Win98 after Replacement HDD

Similar Questions

• A satellite crashes during installation of XP after replacing HARD drive

  Hello

  I'm trying to install a new hard drive, I boot from a CD of XP.
  Everything goes well until the moment when the system reads "Windows starts now" and then my laptop crashes.

  What I am doing wrong?

  Hello

  First question; What model of laptop do you have exactly?
  Second question; New HARD drive is recognized in the BIOS?

  If you have a series of laptop latest then you should check if the SATA in the BIOS mode was changed to compatible.
  You can install the operating system without previous SATA driver installation.

• Satellite C670D-109 - installation of recovery after replacing HARD drive image

  Hello

  I have a problem to restore my laptop.
  My hard drive is not working, I do not have the recovery disks, but I managed to save the HDD Recovery folder in a partition of DATA.

  Once installed the new hard drive, it is possible to recover my original without the cd, but with a pen drive usb installation?

  > Once installed the new hard drive, it is possible to recover my original without the cd, but with a pen drive usb installation?
  Unfortunately, you will not be able to start the recovery image installation. The data saved on unusable USB on this path. It must be the startup created by Toshiba recovery disc creator device
  You can only install recovery image using the recovery disk.

  If you n t have it you can order a new one.

• Satellite Pro A10 (PSA15E) - no card after replacing HARD drive wireless network

  Hello

  just a spare hard drive was fitted by an expert, all drivers and update of the BIOS installed on the site of Toshiba, but my wireless network card does not work.
  When I try to connect via a router it says that the card is disconnected?

  I went into Device Manager and of what follows is listed under devices Details ld:
  PCI\VEN_10B7 & DEV_6001 & SUBSYS_600110B7 & REV_01\5 & 36 D 029F7 & 0058F0

  Can someone please tell me which card is installed and where / how do get me to it.
  I don't understand how it can be unplugged?

  I use a 3com officeconnect wireless 11g PC Card which works fine until the hard drive failed.

  Help, please... I am due to go to the hospital Monday and I wish I could take it with me.

  Thank you

  Hello

  Sorry if I write this too late. :(

  He's old enough for laptop and I don't know with certainty what is the card inside, but all notebooks with wireless network inside card have a small stick of Wi - Fi at the bottom with number of WLAN card. Using this number in Google, you can identify the card.

  Anyway, there is not a lot of possibilities because on the Toshiba support page there are two WLAN drivers listed for your model of laptop. Try to install both of them. One of them must be good.

  Good luck!

• Satellite Pro 480CDT does not start (even in BIOS)

  Hi all

  I just hand on a Toshiba Satellite Pro 480CDT

  I had to work with the original power supply (on an inverter plugged into my 12v cars I wasn't close to 240 v power outlet)

  It worked very well, it boots into Windows 98 and I played with a few programs (Media Player and defragmentation)

  I got it defragment for about 5 minutes, while charging via the car converter, however it froze and I had to hold the power button to restart.

  When I tried to next turn on the screen remains empty, the hard drive is not turn and there is only the power LED and battery LED that lights up.

  He let me press the function key that lights up the fn LED on top of the keyboard, but then after a few presses of lighting stops.

  I opened the case and concluded that there are two batteries of the bios, the look at where they are plugged into the main Board, there is green type of corosion on the pins, I removed the plugs (who might add when it is very difficult to remove because of the coros), I cleaned the plugs (male & female) with a pen of WD40 and plugged in I got a voltmeter on them and they demonstrate tension and also show higher voltage when the power supply for laptop is connected, then it means they are load or at least tension.

  After doing this I go up the laptop, but it still suffers from the same problem?

  Please what could someone help or give me a little advice? My next event is the power supply Board but wanted to get some ideals before hand.

  Thanks in advance.

  Pete

  > after doing this I go up the laptop, but it suffers still from the same problem?

  His pity to hear that your baby dead :(
  But if we move to a diagnosis of material, I doubt someone here might be able to point in the right direction if his motherboard problem, it would be really difficult to solve this problem without using special tools, circuit diagram of motherboard and of course experience

  I think you should check the modules memory vivid faulty ram could affect the laptop everything is just speculation

• Satellite Pro 480CDT: Wave Device for Voice Modem

  I reinstalled Windows 98SE on Satellite Pro 480CDT and it seems to work ok. But when I go into the Device Manager there is a yellow exclamation point in front of > Wave Device for Voice Modem<>

  Do I need to install a driver for it? Could you describe or point me to it?

  Thank you.

  Hello

  Perhaps this explanation can help you http://www.modemsite.com/56k/wave.asp

  Good bye

• My Satellite Pro L Gets a BSOD after going into sleep

  My Satellite Pro L Gets a BSOD after going into sleep
  We spend whenever my laptop is asleep or in hibernation.
  When she comes back, it goes to BSOD.

  Can you help me please?

  What cell phone do you have exactly?
  What operating system do you use?

  Have you tried to reinstall the OS using the recovery CD?
  You update the OS?
  You update the BIOS?

• Satellite Pro 480cdt: repair repair

  Where can I get a repair manual for a Satellite Pro 480cdt service?

  Hello John

  Unfortunately these types of documents are not public. I tried the same thing for my Tecra but without success. What you want to do exactly?

  Maybe some users of the forum can help you with the disassembly/Assembly procedure.

• Satellite Pro 480CDT does not start with mounted HARD disk?

  Hello
  I have tried several disks in my Satellite Pro 480CDT, but none of them starts. The screen stays black and the power led blinks orange (long, short, short, short, short, long, short, short). If I drive the machine past the on-screen "In Touch With tomorrow, TOSHIBA. He sees Windows CD-ROM or a floppy disk. I tried with 6 hard drives all below to 6 GB and AFAIK the work. I tried with another 480CDT a 220CS and a 2140CDS. Surely all hard drives and computers laptops have the same flaw? What I need to update BIOS or something as none of the drives are original for the machines.
  Help, please!
  Thank you

  John.

  Hi John

  I'm afraid of nothing that you can do everything alone. When the electronic power supply detects a power problem, it sends the hex code. In this case you should contact the technicians. They can read this code and will know what the problem is here.

  Just FYI: I discovered this disc HARD original for this unit has the P000244000 part number. Maybe it will help you get another HARD drive for testing.

  Sorry I can't tell you more info on this good old classic.

• Satellite Pro C850 - WLAN call default after installing Win 7

  Hello

  I own a C850-1 gr (PSCBXE), which comes with Win8.
  I bought Win 7 32 bit Home Premium and reinstalled from scratch.
  Later I installed the drivers from toshiba support page in the following order:

  Chipset SW installation utility
  Intel Management Engine Interface
  Display driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  ATI HDMI Audio Driver
  HD SRS Premium Sound Technology
  Synaptics Touch Pad Driver
  Realtek LAN Driver
  Realtek driver LAN wireless
  Intel Wireless Display
  Filter driver package Realtek Bluetooth
  Bluetooth monitor
  Intel USB3.0 driver
  Realtek card reader
  TOSHIBA Value Added Package
  Sleep TOSHIBA utility
  TOSHIBA resolution + plug-in for Windows Media Player
  TOSHIBA Media Controller
  TOSHIBA Media Controller plugin
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  PatchFiles PCIIDEREG - 1.2
  PatchFiles

  When installation is complete, WLAN fails after reboot, alternating.
  This means:

  * First boot: WIFI OK *.
  * Second startup: WLAN failed *.
  * Third start-up (= first boot): WIFI OK *.
  * Fourth Starter (= second boot): WLAN failed *.
  *...*
  * and Yes guess

  Lack of resources, the WLAN icon is displayed for a few seconds, then "no network" icon.

  Any help is greatly appreciated.

  Hello

  Your order of installation of drivers contains the Intel WLan driver.
  But the laptop Satellite Pro C850-1 GR was equipped with the Realtek RTL8723AE WLan/BT combo card.

  I think that you need to uninstall the Realtek WLan driver and WLan Intel driver.
  In addition, you must pay attention to the functionality of BT.

  The card is compatible with the BT and you need to install the driver Package Realtek Bluetooth filter before installing the battery Toshiba BT.

  In addition, do not forget that this WLan adapter is enabled by using the FN + F12 (or just the F12)

  Finally and above all do not forget WHAT BIOS the dafault value

• Satellite Pro C50-A-154 - battery after automatic update problems

  Hello world!

  First of all, I must apologize for my bad English, if it is not as good as be... after that, I could start to tell you all what happened to me in the last few weeks...

  I have an a C50-A-154 Toshiba Satellite Pro and I use it for stuff like watching youtube videos, listening to music, and do this kind of thing than a normal user.

  A few weeks ago a Toshiba Tempro Alert remember that there are software updates avaliables to download for my laptop, so I installed them, I normally unplug my battery when I have the power cord plugged in, so I didn't realize after a week after that my battery was not recognized as it should be for my toshiba.

  Initially, windows said that it is fully charged and no need to continue to load, so I unplugged the power cord and the laptop shutted down (with battery connected and therefore be charged to 100%).

  When I plugged it again the power supply cable, windows said that the battery was empty and told them, hip but not load...

  At the same time, a new toshiba update was released, this time was for the bios, if I have that it is probabbly fix the problem with the battery, so I updated the BIOS and windows says that the battery was full charged... I couldn't believe...!

  But the system always goes down when yo unplugg the AC cord, and now battery said once again that it is empty...

  Yesterday was a new update for the Bios, so I give another chance, but nothing has changed... I can't use the battery, and I have no warranty, so I don't know what to do...

  I read a lot of posts on battery of problems lately, in the forums of europe and US forums... maybe it's a software problem? Maybe toshiba boys don't have any idea about this problem?

  Thanks for your replies!

  Ruckmess

  Hello

  I think it might be a software related issue.
  In Device Manager, you will find the battery input compatible Micorsoft ACPI method. It belongs to the Advanced Configuration and Power Interface.

  I recommend you to uninstall the three topics that you might find in the battery area.

  Reboot the laptop. After restarting again, the system should install all devices removed once more.
  Usually, this should help to unravel the question in the case of its just system problem

• Satellite Pro C850-1HD: valid guarantee after RAM upgrade?

  I work with a laptop Toshiba Satellite Pro C850-1HD in the warranty period, and I would like to know whether to extend the warranty for laptop RAM is maintained.

  Thank you

  > I would like to know whether to extend the warranty for laptop RAM is maintained.
  RAM upgrade does NOT affect the warranty.

  Here you can find instruction and nice workaround how to replace Toshiba Satellite Pro C850 modules series
  [Satellite Pro C850 / L850 - Memory Module replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU2603BZ0000R01.htm]

• Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

  Hello

  I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

  Please send me some suggentions how to solve this problem.

  Thank you [email protected]

  Hello

  How did you notice this problem? You get an error message or something else?

  It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Install the latest version and try again.

  By the way: you run factory settings or you have installed your own version of Windows?

  Welcome them

• Satellite Pro L300 will not start after the Bios Update

  Help please.

  I simply formatted laptop Satellite Pro L300.
  I used all the drivers updated Toshiba and everything is fine.

  I then updated the bios with the latest version.
  After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

  The ides welcome

  Hey Buddy,

  What start menu, you mean?

  I put t understand how it is possible until you wrote that your laptop does not start?

• Satellite Pro P300 - screen remains blank after power on

  My Toshiba Satellite Pro P300 power on, the screen remains blank.

  Can someone please help?

  Looks like a FL. inverter problem
  I doubt that you could replace is it s a job to a service technician.
  The FL Inverter control the backlight of the screen and if it s faulty, you will see everything as behind a thick fog