How to build a library for export as a .jar file? Œuvres if lib is a CLDC App, but no library

Similar Questions

• How to build custom EDI .ecs and .xsd to a file

  B2B gurus,
  
  I have a question. I have with me the file with an extension of steffen42. This isn't a standard EDI file. So, I need to create this file steffen42-based .ecs and .xsd files. How to do this in the Document B2B Oracle Editor. I tried going on the card manufacturer, but it gives an error. can you help me please on this.
  
  Thank you
  NGO

  Hello, NGO,

  Use the SpecGenerator tool in B2B Document Editor to generate ecs from a data file. With the help of ecs you can generate XSD later.

  Don't forget, it's the same risks as the generation XSD from an XML where it will be very specific to the structure of the data file used to generate the spec. Ideally, you should follow the opposite approach that is firstly set the ecs according to your requirement and then to generate data to test out of it.

  Kind regards
  Anuj

• How to build a formula for this logic.

  Hello
  
  I have a requirement like, I need to derive a column with a calculation.
  
  Here is the psedocode,
  
  number of occurrence (deptno = 10) / count (deptno = 10)
  
  Expected result:
  
  If the deptno = 10 occurs 3 times in the table, then at the time of fist should be the calcuation
  
  second 1/3, 2/3 of the time, the third time 3/3 and so on.
  
  How can I build this in a form/report/RPD design. Help, please.
  
  Any help will be appreciated with points.
  
  Thank you.

  The overall operation will help you do this, i.e. RCOMPTE, C.V.

  This should work:

  C.V. (CASE WHEN deptno = 10 THEN 1 ELSE END 0)

  to give you the current account lines where deptno = 10

  Then you can divide ths by

  SUM (CASE WHEN deptno = 10 THEN 1 ELSE END 0)

  don't know if that will be 100% or not, but try the first statement so you can see the overall work running, then try the Division in order to see if it works:

  C.V. (CASE WHEN deptno = 10 THEN 1 ELSE END 0) / SUM (CASE WHEN deptno = 10 THEN 1 ELSE END 0)

• How to build a SQL for this logic.

  Hello
  
  I have a requirement like, I need to derive a column with a calculation.
  
  Here is the psedocode,
  
  number of occurrence (deptno = 10) / count (deptno = 10)
  
  Expected result:
  
  If the deptno = 10 occurs 3 times in the table, then at the time of fist should be the calcuation
  
  second 1/3, 2/3 of the time, the third time 3/3 and so on.
  
  How can I build in a sql query. Help, please.
  
  Any help will be appreciated with points.
  
  Thank you.

  Try this.

      SELECT LEVEL / CNT CALC
        FROM (SELECT COUNT (*) CNT
                FROM EMP
               WHERE DEPTNO = 10)
  CONNECT BY LEVEL <= CNT
  

  G.

• How do I edit metadata for wmv, avi and mp4 files in WINDOWS XP.

  Hello world

  I have windows xp professional sp3 and windows media player 11. I am not aware that with my system, I can use anything beyond wmp11.

  I have a filmmaker who does not use Mac (I really don't like them). As such have hundreds of video files, both my own and friends, colleagues and clients. I'm * REALLY * try to organize my files and I wanted to add metadata to the videos so that I can search by category, type and the names of the people who participated in the production. I tried to make this easier by using the metatags as 'comments' and 'Keywords' etc. I thought it was a pretty simple procedure - just right click on the file and change the properties.

  I tried everything that comes to mind and spent 3 hours in all research on this question with NO results! Each awnser I've seen so far does not help me. Unless really miss me something.

  I imported video files in my library. I can't get the "Advanced Tag Editor" appears with movie files. I understand not only with audio files. I downloaded abcavi editor and who does nothing, I can't always find the files and when I right click on them and look at their properties, they remain dimmed. I used adobe bridge (cs4) and meta-data that application only works when you use it. I don't want to have to ramp bridge and sacrifice the memory just to perform a task which should be simple and accessible using my operating system.

  any help is really very much appreciated.

  Thank you very much in advance.

  -p.

  AudioShell adds tabs for metadata to the properties of the file to many formats, including WMV and MP4.

  As far as I know, there is nothing like this for AVI files, so you will need to use the external abcAVI for this. Note that AVI has very bad assumption, marking, so you're usually better with WMV or MP4.

  Tim Baets
  http://www.BM-productions.TK

• How can I search only for Word 2003 document.doc files

  When you enter type in the search box, it returns all Word documents.  How can I specify only the documents in the old format 2003 * .doc?

  Thanks in advance.

  file name: ~ ".doc".

  The : ~ means "must be exact" (if you used just filename: ".doc" without the ~, he would always find the docx for example).

  The * is just a joker and can be used on any version of Windows or DOS.

• How to cut a clip and export using the same file format

  I use CS6 on a Windows 7 system. I have a MB 304, 8 HR record from a workshop that I put on recently and I would like to extract the different sections of the workshop in their own files.

  Here's the info from the source file:

  Type: MPEG Movie

  File size: 304,0 MB

  Image size: 1920 x 1080

  Frame rate: 5.00

  Audio Format: 16000 Hz - compressed - Mono

  Project Audio Format: 32000 Hz - 32 bit floating point - Mono

  Total duration: 07; 35; 20; 25

  Pixel format: 1.0

  My ideal solution is to delimit work areas that cover the section I want to extract and then export it to the target file by using the same parameters as the source file.

  So far, the resulting files have been considerably larger than the source file, so I hope that there is a simple way that I'm missing.

  THX!

  So, can you go down to set rates manually? It's been a while since I used CS6, but I think that the option was there... and something you can do to help, is to say MediaInfo on your computer...

  Media Info: https://mediaarea.net/en/MediaInfo

  Drag & drop your clip on that, it will tell you the exact wrapper and the codec used, including the bitrates & such. You will know exactly what your current clip is this way. Build a preset to match.

  Neil

• How can I make PSE8 for read 'Rating' of XMP files?

  Hi, I'm sharing the 'Scoring' between Lightroom2 and Photoshop Elements8 parameter.

  PSE8 can't read the XMP files created by Lightroom2 parameter.

  I did following steps.

  1. (Lightroom2) set up a camera RAW file named aaa.cr2 and note it as five stars. (I use a Canon DSLR. )

  2. (Lightroom2) do an XMP file for the file. AAA. XMP is created in the same directory.

  3. (Explorer and Notepad) open with a notepad.exe aaa.xmp and check 'Rating' has five.

  4. (PSE8) Open aaa.cr2 PSE8 Organizer. The thumbnail is applied in Lightroom2 settings like exposure compensation for.

  5. (PSE8) setting rating in PSE8 orginizer watch however always zero star.

  It ' a characteristic? Or something is strange?

  Can someone help me?

  To test my understanding: you have the same image imported into the Lightroom library and your PSE catalog.   Then, you change the star rating in LIghtroom, and you had like this new qualification to be included in the PSE.

  The only way you can do is to remove the photo of your PSE catalog (without removing the disc) and re-import in EPS.  Edit > update thumbnail is inconsistent - it reads metadata, such as the legend and the date and time, but it doesn't not another, read as tags keyword ad star ratings.

• How to extract the Setup for the current operating system file?

  I run an early 2011 Macbook Pro (8 GB of RAM, 500 GB HD). My main use of the computer is software development, and so far I've been able to do what I have to do with the Mountain Lion.

  Expository made. I downloaded the Setup file of El Capitan on the Apple Store and am prepared for a new installation - however I would always have the .iso for Mountain Lion image file should I choose to go back.

  I found sites that allow image .iso for free downloading - however cool gave Apple $20 to download from their website - I'm hesitant to run out of what I guess that they are treated as counterfeit software. Is there anyway to extract the .iso of my latest version of Mac OS x image file?

  Thank you

  O

  N ° log in to the Mac App Store with the Apple ID you had attempted to get the Mountain Lion and it re-download from the purchases tab.

  (140118)

• How can I set up to export excel header lines?

  I used Vi Logger in the past.  Now, I have SignalExpress, but I can't find the way to configure the row header in Excel when I export experimental runs to this format, as it is possible in ViLogger

  I'd appreciate some tips

  Alberto

  Hello Alberto,.

  Unfortunatelly in Signal Express is not how to change the header for export to excel. What I suggest for you is to use the project documentation and create a custom in your project report. To access the Documentation of project go to: view > project Documentation.
   
  I hope it can help you.

  Kind regards

• How to reset the permission for application settings after installation?

  Hello

  One of my clients just sent me and she accidentally disabled (this refusal) "Geolocation" permission when you run the application for the first time.  She tried to uninstall and reinstall the app, but she says that the permissions screen is then short-circuited.  Does anyone know how to reset the settings for authorization for an application on the Playbook?

  see you soon

  Mark

  Unfortunately I still haven't a tablet to test this on, but looking at the screenshots of settings menu on the berryreview.com website, it seems that permissions can be managed in the Security tab.

• How to deploy the agent for solaris

  I have download for Windows Server and the Agent for Solaris.
  The server for windows successfully installed, but how to install the agent for solaris?
  
  The downloaded file is hyperic-hq-agent-3.1.4-EE-504-sparc-solaris.gz
  and when I unzip, it's just hyperic-hq-agent-3.1.4-EE-504-sparc-solaris.
  
  Any help is greatly appreciated.

  Hi Nemesis

  The file extension must be tgz, gz not, maybe your browser has changed.
  You can use this command:

  tar - zxvf hyperic-hq-agent-3.1.4-504-sparc-solaris.tgz

  Then use «./hq-agent.sh setup' to start and configure the agent.

• OIM 11 g: how to get a list of downloaded JAR files

  I'm new to OIM 11 g and just familiarize themselves with new tools/scripts used for loading/downloading the JAR files, plugins, resources, etc. Is there any script or the available API that allows you to enumerate what has already been downloaded?
  
  Thank you.

  There isn't an API, but you can query the database to find the jars:

  Select * from oimhome_jars

  Download/update scripts are /server/bin. You'll need the weblogic.properties file is set correctly and then you can use the weblogicXXXXX script to do the rest.

  -Kevin

• How to add multiple images to a JLabel since the jar file

  I want to add more than one image in a JLabel, but the icon property only allows me to add a. I thought I could use the rendered html to add the images I need using the < img > tab, but I need to use a URL that points to the image.
  
  How do I point to an image in the jar file? If I can't do it, is there another way to display multiple images in a JLabel since the jar file?

  Discover camickr [http://tips4java.wordpress.com/2009/03/29/compound-icon/ url] composed icon.

  DB

• How can I be sure that all the pictures selected for export (all 1600) have been exported to my backup drive (before I remove them on the Mac)

  I want to be sure that all of my 1600 + photos and movies were actually exported to the Seagate backup drive that I installed on my MacbookAir. How can I know it?

  If they have been exported to a single file on the EHD?  And if you have exported them should have exported them as "Original unmodified" in order to get the original video files and not a jpeg thumbnail.

  The best solution, if the Seagate HD is formatted for OS X Extended (journaled) is to save the photo library so that you keep both both original and edited, all projects and metadata (keywords, titles, faces, places, etc.).