How to build testStandLVRTS for TestStand 4.1

Similar Questions

• How To Build exe for previous Versions

  I am a bit new to LabView and still struggilng with all the files associated with a project, so I don't know that it is a simple question.

  I'm under LabView v10 for development, but wants to create an exe that run on a version of the runtime v8.5. I've seen threads that suggests it's as simple as 'Save for the previous Version'... but for some reason I can't seem to make this work. I tried to save the vi for 8.5, then by choosing to build the exe, but to be invited to create a project, I thought it has not saved changes - that the Subvi have been converted to version 10. I tried to reduce the changes and opting to use those memory, but it does not; exe built then gives me a runtime error, complaining that isn't time LV 10.

  I tried to save the project with 'Save for the previous Version', and then construction. Yet once, it works not even if when I opened, and then immediately close or the project, or it contained VI, I thought it has not saved changes where it was converted in LV10 - implying the indeed saved files in LV8.5 format.

  I seem to go along in circles here. What is mind someone on the steps needed to build an exe that run on a previous runtime environment?

  Thanks in advance

  To my knowledge, none of the device drivers of OR may have multiple versions co-exist.  Now, who does not necessarily mean if you use any material that you will encounter problems.  If the material is material OR, then they will also have specific drivers that may be conflicting, but if they are from another manufacturer, it will come down to NI-VISA probably.  If you use data acquisition cards, then you have installed DAQmx.

  As long as your program is not access to these devices, you're OK.  Do not update the drivers if you do not use the equipment.  You need to look for in the relase notes each of the drivers you need to update and see if you can find a version that supports 8.5 and LV2010.

  Even if you do this, it is not 100% guaranteed that you will have problems.  I wrote an application for a client once used OR-DAMA.  I had a control on the front panel, based on a typedef in the pilot.  I've updated my laptop for a new project, but later had to come back and do an update for the original project.  The typedef had changed and caused a recompilation.  Nothing broken on my end.  When I sent the update, it crashed on the PC of the client due to the change of the typedef.  I ended up bringing to upgrade the driver on their machine.

• How to build botan lib for BlackBerry 10?

  Hello

  I'm porting some proxy software - as in 10 BlackBerry platform then I found it requries botan 1.1 +.

    (25,10):#include 
      (26,10):#include 
      (29,16):using namespace Botan;
  

  etc.

  This is the homepage of botan: http://botan.randombit.net/

  y at - it advice on how to use this lib in my application of cascades?

  Botan has a configure.py in the downloaded tar, works fine on linux, but how to build targeted qnx lib?

  Thank you.

  Unfortunately you cannot use the series of development because it requires "version 1.11.0 and require a compatible for most C ++ 11 3.1 Clang compiler or GCC 4.7.

  1.10 stable series should be ok.

• How to build color grain sorting

  Hello

  I am currently working on the build system for the sort of color of the grain. The system process will be like this

  -The grain will run in a chute in a continuous stream of almost (with several lane).

  -use of scan line GigE and vision software from OR to detect the failure of grain (black color).

  -After the vision system to detect defects that can be random in herizontal KING.

  -I guess the vision system can send the position of each defect to the KING (not pixel. (or coordinate X).

  -Then, use default position to trigger the ejection nozzle air to dismiss the flaws.

  I have a lot of questions to be clarified before going any further, please help answer my questions.

  -That the software of NOR and the material can be used to inspect the defect of color?

  -How to get the position or the X-coordinate of each defect to KING?

  -Is it possible to send the default position information to the PLC? and how?

  Best regards
  Siriwut H.

  How long do you have between the camera taking the picture and turn the air release valve?  It does not appear that it would be very long for me.

  If it's extremely critical time, I would probably do the system using a Camera Link interface, which built in the FPGA.  NOR has the one I used before quite successfully.  I do the treatment on the FPGA for image and then control the valves of air of an FPGA.  I would like that the entire system FPGA and RT to ensure that when everything is right.  You do not want Windows to waste your time on something like that.

  Once your image processing finds a fault, you just a delay queue and trigger the air valve after the delay.  Tweak you the delay until you have found the right time.  Depending on your air valve system, you may be able to eliminate the individual grains.

  Bruce

• How can I determine if TestStand works from CVI?

  I'm programming a popup for my operator interface custom. I put this popup in the process template. The problem is that I don't want popup in TestStand. Unfortunately, they have to share the same process template. Does anyone know how to determine if you are running from TestStand programmatically through the CVI. I want to just my code to see if it is used for TestStand or CVI. If CVI, then he can use the popup, if TestStand then I would for this popup nothing.

  It is possible to do so I would also like to see what movie file, it runs in TestStand and get the current directory of this particular file. All this I do with LabWindows/CVI 7.1 and I use TestStand 3.1.

  Thanks to anyone who can help me on this one.

  Or the Engine.ApplicationIsEditor property

• How to build a table of TDMS file open

  Hello

  Examples NI TDMS - Express write data .vi (time domain), I can build a PDM file with 2 channels (sine and square waveforms) data, which are stored as test.tdms.

  Using Express read .vi data (time domain), 2 channels of waveform data are read. How to build a table later? How to separate the 2 channels of data in the tables 1-2 and manipulate the data using table functions?

  For example,.

  I want to collect 100 from index100 between channel 0 and their average. I want to take 50 samples from the channel 50 1 index and double each element.

  Thank you for your help.

  Bing@NCL

  Hey Bing.

  You can perform operations on different channels in the 2D table using the table to index. This will allow you to choose the channel to operate on, then you can perform the operation inside a loop on each element. In the included code snippet, I used a shift register to find the total cumulative values in channel 0 and then divided by the number of samples.

  I recommend you read some tutorials LabVIEW and bases of knowledge on topics that are related to yours. These could help a lot.

  I hope that my suggestions help,

  Chris

• Use of the standards of construction for TestStand deployment target

  Hello world

  I currently use an Internet Toolkit OR in one of my VI to build a module of code for TestStand.

  The question is which target the deployment of doesn't have the NI Internet Toolkit.

  So I would like to build the way to the deployment target VI would not need the Toolbox for the use of the VI.

  Did someone knows a way for that?

  Thank you all...

  With the application builder, create a dll. Your other options is to buy the box for each deployment tools or do not use the Toolbox.

• How to build a {+ 1, -1} by wavelets?

  I am using labview 8.6 and the statement calls for me to "convolve data with Wavelet following {+ 1, -1}.» How to build this Wavelet?

  Thanks for the help.

  -T. Vepa

  [email protected]

  Something like that

  

• How to build the table with all the combinations of a source table?

  Hello

  I have a 2D array that contains the list of the power user-defined settings. The number of PSs (table rows) is not fixed. For example - 3 PSs:

  Stage of Min Max name

  PS1 3.0 3.6 0.3

  PS2 0.9 1.2 0.1

  PS3 1.7 1.9 0.1

  I need to build, from this list, a table of all the combinations as below:

  PS1 PS2 PS3

  3.0 0.9 1.7

  3.0 0.9 1.8

  3.0 0.9 1.9

  3.0 1.0 1.7

  3.0 1.0 1.8

  3.0 1.0 1.9

  3.0 1.1 1.7

  3.0 1.1 1.8

  3.0 1.1 1.9

  3.0 1.2-1.7

  3.0 1.2-1.8

  3.0 1.2-1.9

  3.3 0.9 1.7

  3.3 0.9 1.8

  3.3 0.9 1.9

  3.3 1.0 1.7

  3.3 1.0 1.8

  3.3 1.0 1.9

  3.3 1.1 1.7

  3.3 1.1 1.8

  3.3 1.1 1.9

  3.3 1.2 1.7

  3.3 1.2 1.8

  3.3 1.2 1.9

  3.6 0.9 1.7

  3.6 0.9 1.8

  3.6 0.9 1.9

  3.6 1.0 1.7

  3.6 1.0 1.8

  3.6 1.0 1.9

  3.6 1.1 1.7

  3.6 1.8 1.1

  3.6 1.1 1.9

  3.6 1.2 1.7

  3.6 1.2 1.8

  3.6 1.2 1.9

  How to build this table programmatically?

  (Note also that the number of rows in the source table is not fixed).

  Thanks in advance!

  Hi Berezka,

  using a magic of automatic indexing:

  

• Build an html5 app, I only .html, .js, images, css file folder files / files. How to build a web app/html5 app in that if I did not file config.xml?

  Build an html5 app, I only .html, .js, images, css file folder files / files. How to build a web app/html5 app in that if I did not file config.xml?

  I downloaded the game codes and try to build games using these codes, but I had only

  data folder

  image folder

  js file with .js files

  file .html

  main.js file

  In this case, how build/package web app /html5 app if no config .xml given?

  You will need create your own file config.xml. There are samples and documentation on each of the items on our microsite here:
  https://developer.BlackBerry.com/HTML5/documentation/gold/working_with_config_xml_file_1866970_11.ht...

  Note that all the elements in the samples are not necessary. For each piece, make sure that you actually need in the config.xml file. For example, most web game conversions will not need elements (using the old SDK) since they make use of BlackBerry-specific APIs.

• How to build a photo file to be able to print poster size?  I would use an outside vendor to print.

  How to build a photo file to be able to print poster size?  I would like to use an external vendor to print

  Talk to who that it is made to feel and see what their needs are. Most often a jpg high quality enough. Often, you have a PPP high setting for posters due to the viewing distance. 300 DPI to max, but I went up to 100 dpi for prints 30 X 40.

• How to build the Applet Toolbox

  Dear friends
  
  For now, I'm starting with the applet from the Toolbox. In fact, I don't know how to build them, or run them as a demo even if I had a lot of examples on the internet.
  
  I know that there is an IDE called Developer Suite, which is developed by Gemalto, providing the necessary facilities to write applets toolkit to build and execution. However, this tool is loaded and not free as long as Netbeans or Eclipse.
  
  My question is: How can I build and run a toolkit applet without buy Developer Suite?
  
  P/S: from the internet, I now sim.toolkit. * and sim.access. * two packages. Can I write a box applet tools on Notepad and use the ANT TASK packages (I know ANT is very useful) to build the toolkit to the CAP file applet? If so, how? : D

  Hello

  You should be able to process packets of the Toolbox like any other Java Card library. As long as you have the class files for compiling against and EXP to convert you files can use ANT or even the simple command line tools. Treat these libraries exactly as you would for the JC API and you should be fine.

  See you soon,.
  Shane

• How to 'Allow smoothing' for the loaded XML .jpg?

  I have a thumb wheel image that loads a bunch of jpg. They are be enlarged rollover in 1,05.

  I've seen pixelated at scale 1 x 1 as well as expanded.

  I'm happy prettey how Flash renders the images with "Allow smoothing" on.

  How would I do it for the loaded xml jpg? Would it be as a script in the main folder or in the xml file?

  Here's how to load images in AS3:

  function completeHandler_AppPopUps(e:Event):void{
            //trace("thumbnail complete "+e.target.loader.parent.parent.name)//tells us when the loading is complete
  
            //size image into scroller (need only if I will have images at different sizes)
            resizeMe(e.target.loader.parent, 60, 90, true, true, false);
  
            TweenMax.to(e.target.loader.parent.parent, .5, {alpha:.7});//makes all thumb images at alpha=.7 after they are fully loaded
            //Tweener.addTween(e.target.loader.parent.parent, { alpha:1, time: .5 } );//caurina version
  
            TweenMax.to(e.target.loader.parent.parent, .5, {colorMatrixFilter:{contrast:1.1, brightness: .7, saturation: .5}});//makes all thumb images at brightness:0.5 after they are fully loaded
  
  
  }
  
  

  I don't want to complicate things more than necessary, but just in case it's needed here is the complete code for the edification of the wheel section:

  /////Parse XML
  //build scroller from xml
  function buildScroller(imageList:XMLList):void{
            trace("build Scroller");
  
            for (var item:uint = 0; item<imageList.length();item++) {
                      var thisOne:MovieClip = new MovieClip();
  
                      //outline
                       var blackBox:Sprite = new Sprite();
                      blackBox.graphics.beginFill(0xFFFFFF);
                      blackBox.graphics.drawRect(-1, -1, 62, 92);//-1,-1 places rectangle 1px left and up.62, 92 draws rectangle 1px wider on all sides of placed image dimenstions of 60x90
                      blackBox.alpha = thumbFadeOut;//setting Border Tweens
                      thisOne.addChild(blackBox);
                      thisOne.blackBox = blackBox;//setting Border Tweens
  
                        thisOne.x = thisOne.myx = (60 + padding) *item;//replaces the line above for scale tweenw roll over calculation. "myx" is a made up term which defines the position. 61 is the width of the thumb
                      thisOne.itemNum = item;
                      thisOne.title = imageList[item].attribute("title");
                      thisOne.link = imageList[item].attribute("url");
                      thisOne.src = imageList[item].attribute("src");
                      thisOne.alpha = 0;//makes all thumb images at alpha=0 before they are fully loaded
  
                      //Loading and Adding the Images
                      //image container
                      var thisThumb:MovieClip = new MovieClip();
                      //add image
                      var ldr:Loader = new Loader();
                      //var url:String = imageList[item].attribute("src");
                      var urlReq:URLRequest = new URLRequest(thisOne.src);
                      trace("loading thumbnail "+item+" into Scroller: " + thisOne.src);//url
                      ldr.load(urlReq);
                      //assign event listeners for Loader
                      ldr.contentLoaderInfo.addEventListener(Event.COMPLETE,completeHandler_AppPopUps);//tells us when the loading is complete
                      ldr.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, errorHandler_AppPopUps);//tells us if there are any typo errors when the loading is complete
                      thisThumb.addChild(ldr);
                      thisOne.addChild(thisThumb);
  
                      //create listeners for this thumb
                      thisOne.buttonMode = true;//makes boxes act as buttons
                      thisOne.addEventListener(MouseEvent.CLICK, clickScrollerItem_AppPopUps);//makes boxes act as buttons
                      thisOne.addEventListener(MouseEvent.MOUSE_OVER, overScrollerItem_AppPopUps);//traces the title when the mouse is over the bounding box in the Output Panel
                      thisOne.addEventListener(MouseEvent.MOUSE_OUT, outScrollerItem_AppPopUps);//traces the title when the mouse is out the bounding box in the Output Panel
  
  
  
                      //add item
                      scroller.addChild(thisOne);
            }
            scroller.addEventListener(Event.ENTER_FRAME, moveScrollerThumbs);//adding movement on mouse position
            trace("termination of build scroller");
  
  }
  
  
  

  in your listener to full charge, enable the property smoothing to the content of your charger (expressed as a bitmap).

  function completeHandler_AppPopUps(e:Event):void{

  Bitmap(e.currentTarget.loader.content).smoothing=true;
          //trace("thumbnail complete "+e.target.loader.parent.parent.name)//tells us when the loading is complete

  //size image into scroller (need only if I will have images at different sizes)
            resizeMe(e.target.loader.parent, 60, 90, true, true, false);

  TweenMax.to(e.target.loader.parent.parent, .5, {alpha:.7});//makes all thumb images at alpha=.7 after they are fully loaded
            //Tweener.addTween(e.target.loader.parent.parent, { alpha:1, time: .5 } );//caurina version

  TweenMax.to(e.target.loader.parent.parent, .5, {colorMatrixFilter:{contrast:1.1, brightness: .7, saturation: .5}});//makes all thumb images at brightness:0.5 after they are fully loaded

  }

• How to build an Essbase cube

  Hello world
  
  I'm new on Essbase, I'm looking for processes step by step the creation of essbase cubes. Please suggest me what tools do I need to use to generate cubes essbase on the relational database (Oracle 10 g). How difficult is it for guy cool to build according to a requirement of the company. I have to learn any scripting language to create a cube that involves a lot calculation. I googled for information on that, but I don't have any information. Please give me a link or a doc or video through which I will get full understanding of essbase cube creation.
  
  Thanks in advance.
  
  Concerning
  Sandeep Artham

  Starting with Oracle for example is a better source:
  http://www.Oracle.com/technology/OBE/hyp_ana/ess11.1.1.htm
  It contains audio and video lessons OK as well.

  Hyperion Essbase provide a powerful analytical processing in order to satisfy a wide range of business needs performance management across all levels and functional areas of the company. Information is stored in several dimensions and hierarchies that provide a concise and intuitive application model, because they define multiple views of information in the way users same organize, navigate and select of the information for analysis. It means understanding time company a vital role in the direction of Essbase.

  Essbase has our very own Calc scripts, without a doubt, it becomes easy for you to learn if you have prior programming experience. Not difficult, but it's fun. Its really exciting, how you extract information from data, which help such a stong tool.

  Good luck.

• "How to build a reusable toolbar...". "does not.

  I tried to run this suggested in the corner of code document "how to build a reusable tools with Oracle ADF declarative components toolbar".
  I created the toolbar and deployed.
  I have inserted the pot in my project and create a new page.
  I've included the toolbar and hanging methods to the link of the page.
  When I run the page I see the boolbar as well as the data in the table, however, when I click on the button, that nothing has changed (the location of the selection remains unchanged).
  I missed something?
  Should I set a partial trigger?
  TKS
  Tullio

  When you create the declarative element, you now define an attribute and call it something like DataSet (of type String).

  In the declarative component, select the button and for its property TEXT put something like ' next #{uploading. '. DataSet}"- without the quotes.

  This will define that button to show following PGE label if you value DataSet Emp when you use the declarative component.

  So, now you repapckage upward and deploy the library of the ADF and now when you use the component, you can set the DataSet attribute (in the property inspector when you select the instance of the declarative component).

  Hope this helps

  Grant